Vacmaster Professional 6 Gallon 4.5 Peak HP Wet/Dry Vacuum

1. Safety Information

Please read and understand all safety warnings and operating instructions before using this wet/dry vacuum. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

1.1 General Safety Warnings

• Always wear safety glasses and hearing protection when operating the vacuum.
• Do not leave the vacuum unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not use with a damaged cord or plug. If the vacuum is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

1.2 Electrical Safety

• This appliance is for household use only.
• Do not expose to rain. Store indoors.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.

2. Package Contents

Carefully unpack your Vacmaster Professional Wet/Dry Vacuum and all included accessories. Ensure all items listed below are present and undamaged.

Image: The Vacmaster Professional Wet/Dry Vacuum shown with its complete set of accessories, including the hose, extension wands, various nozzles, and filters.

• Vacmaster Professional 6 Gallon 4.5 Peak HP Wet/Dry Vacuum Unit
• 1-7/8-inch x 7-foot EVA Hose
• 2 Extension Wands
• Floor Brush/Squeegee Nozzle
• Utility Nozzle
• Crevice Tool
• Dust Bag
• Fine Dust Cartridge Filter
• Foam Wet Filter

3. Product Overview

Familiarize yourself with the different components of your wet/dry vacuum for optimal use and maintenance.

Image: A detailed diagram highlighting key parts of the vacuum, including the power head, collection tank, latches, ports, handle, and wheels.

• Power Head: Contains the motor, filter cleaning button, and On/Off switch.
• Handle: For easy portability and transport.
• On/Off Switch: Controls power to the unit.
• Filter Cleaning Button: Activates the self-cleaning filter system.
• Vacuum Port: Where the hose connects for vacuuming.
• Blower Port: Where the hose connects for blowing debris.
• Collection Tank: Holds collected wet or dry debris.
• Latches: Secure the power head to the collection tank.
• Drain Port: For easy emptying of liquids.
• Casters: Swivel wheels for maneuverability.
• Accessory Storage: Integrated storage for tools and hose.

4. Assembly

Follow these steps to assemble your wet/dry vacuum before first use.

4.1 Attaching Casters

1. Invert the collection tank to access the caster mounting points.
2. Insert each caster stem into the corresponding hole on the bottom of the tank.
3. Secure each caster with the provided screws. Ensure they are firmly attached.

4.2 Installing Handle

1. Align the handle with the designated slots on the power head.
2. Push the handle firmly into place until it clicks or is securely seated.
3. If applicable, secure with any provided screws.

5. Operation

Your Vacmaster Professional Wet/Dry Vacuum is designed for versatile cleaning tasks. Understand the different modes of operation.

5.1 Dry Vacuuming

1. Ensure the fine dust cartridge filter and dust bag are properly installed.
2. Connect the hose to the vacuum port on the front of the power head.
3. Attach the desired accessory (e.g., Floor Brush/Squeegee Nozzle, Utility Nozzle, Crevice Tool) to the end of the hose or extension wands.
4. Plug the power cord into a grounded electrical outlet.
5. Turn the On/Off switch to the 'ON' (I) position to begin vacuuming dry debris.

Image: Demonstrates the utility nozzle, crevice tool, and floor brush/squeegee nozzle being used for different cleaning applications.

5.2 Wet Vacuuming

1. Remove the dust bag and cartridge filter. Install the foam wet filter over the filter cage.
2. Connect the hose to the vacuum port.
3. Attach the desired accessory. The Floor Brush/Squeegee Nozzle is often suitable for wet pickup.
4. Plug the power cord into a grounded electrical outlet.
5. Turn the On/Off switch to the 'ON' (I) position to begin vacuuming liquids.
6. When the tank is full, the suction will automatically shut off. Turn off the vacuum, unplug it, and empty the tank using the drain port.

5.3 Blower Function

1. Ensure the tank is empty and clean.
2. Remove the hose from the vacuum port.
3. Insert the hose into the blower port located on the rear of the power head.
4. Plug the power cord into a grounded electrical outlet.
5. Turn the On/Off switch to the 'ON' (I) position to use as a powerful blower for clearing debris.

5.4 Self-Cleaning Filter System

This system helps maintain optimal suction by clearing dust from the filter without manual intervention.

Image: A hand pressing the yellow filter cleaning button on top of the vacuum's power head, indicating the activation of the self-cleaning function.

1. While the vacuum is running and you notice a decrease in suction, press the yellow filter cleaning button located on the power head.
2. Hold the button down for a few seconds. This will reverse the airflow momentarily, dislodging dust from the cartridge filter.
3. Release the button. Suction power should be restored. Repeat as necessary during operation.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your wet/dry vacuum.

6.1 Filter Care

• Cartridge Filter (Dry Use): Regularly check for clogs. Tap gently to remove loose dust. For heavy buildup, rinse with water and allow to air dry completely before reinstallation. Do not use for wet pickup.
• Foam Wet Filter (Wet Use): After wet pickup, remove the foam filter, rinse thoroughly with water, and allow to air dry completely before storing or next use.
• Dust Bag (Dry Use): Replace the dust bag when it is full or when suction significantly decreases.

6.2 Tank Cleaning

• After each use, especially wet pickup, empty the collection tank.
• Rinse the inside of the tank with water to remove any residue.
• Wipe the tank dry or allow it to air dry before storing to prevent odors and mildew.

7. Troubleshooting

Refer to this table for common issues and their solutions.

8. Specifications

Technical details for the Vacmaster Professional 6 Gallon 4.5 Peak HP Wet/Dry Vacuum.

9. Warranty and Support

Vacmaster products are manufactured with high-quality materials and craftsmanship. This product is covered by a limited warranty against defects in material and workmanship. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official Vacmaster website. Keep your purchase receipt as proof of purchase.