Rebel KOM1030 Wi-Fi Signal Amplifier User Manual

Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your Rebel KOM1030 Wi-Fi Signal Amplifier. This device is designed to extend the coverage of your existing Wi-Fi network, providing a stronger and more reliable wireless signal in areas with weak or no coverage.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier shown with an Ethernet cable and a separate power adapter, illustrating the product and its basic components.

Package Contents

Ensure all items are present in the package:

• Rebel KOM1030 Wi-Fi Signal Amplifier
• User Manual (this document)

Key Features

• Supports up to 10 simultaneous users.
• Operates on 2.4 GHz frequency band.
• Data transfer rate up to 300 Mbit/s.
• Wireless range up to 100 meters (328 feet).
• Equipped with 2 integrated antennas.

Image: Front view of the Rebel KOM1030 Wi-Fi Signal Amplifier, showing the WPS button and indicator lights.

Setup Instructions

1. Physical Connection

1. Unpack the Device: Carefully remove the Rebel KOM1030 from its packaging.
2. Plug In: Insert the device directly into a standard electrical outlet. Ensure it is securely plugged in.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier plugged into a wall power outlet, demonstrating proper physical connection.

2. Configuration Methods

The Rebel KOM1030 can be configured using two primary methods: WPS (Wi-Fi Protected Setup) or via a web browser.

Method A: WPS Setup (Recommended for compatible routers)

1. Power On: Plug the Rebel KOM1030 into a power outlet near your main router.
2. Activate WPS on Router: Press the WPS button on your main Wi-Fi router. Refer to your router's manual for the exact location and procedure.
3. Activate WPS on Repeater: Within two minutes, press the WPS button on the Rebel KOM1030. The WPS indicator light on the repeater should start blinking.
4. Wait for Connection: The devices will attempt to establish a connection. Once connected, the Wi-Fi indicator light on the repeater will become solid.
5. Relocate (Optional): After successful setup, you can unplug the repeater and move it to a more central location between your router and the area needing extended coverage.

Image: Side view of the Rebel KOM1030, highlighting the WPS button and the LAN port, which are crucial for setup and wired connections.

Method B: Web Browser Setup

1. Power On: Plug the Rebel KOM1030 into a power outlet.
2. Connect to Repeater's Wi-Fi: On your computer or mobile device, connect to the Wi-Fi network broadcast by the repeater (e.g., "Rebel_Repeater" or similar, check the device label if available). This network will not have internet access initially.
3. Access Web Interface: Open a web browser and enter the default IP address (e.g., http://192.168.10.1) or domain name (e.g., http://rebelrepeater.net). Refer to the device label or packaging for the exact address.
4. Log In: Enter the default username and password (commonly "admin" for both, or as specified on the device label).
5. Select Mode: Choose "Repeater Mode" or "Extender Mode" from the setup wizard.
6. Scan for Networks: The repeater will scan for available Wi-Fi networks. Select your main Wi-Fi network from the list.
7. Enter Password: Input the password for your main Wi-Fi network.
8. Configure Repeater SSID (Optional): You can choose to keep the same network name (SSID) as your main router or create a new one (e.g., "YourNetwork_EXT").
9. Apply Settings: Save the settings and wait for the repeater to restart.
10. Verify Connection: Once restarted, the Wi-Fi indicator light should be solid, indicating a successful connection.

3. Optimal Placement

For best performance, place the Rebel KOM1030 in a location that is:

• Approximately halfway between your main router and the area where you need improved Wi-Fi coverage.
• Within the range of your existing Wi-Fi network, where the signal is still strong and stable.
• Away from large metal objects, concrete walls, microwaves, and other devices that may cause interference.

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier mounted on a wall, demonstrating a typical placement for extending Wi-Fi coverage.

Image: An overhead floor plan illustrating how a Wi-Fi repeater extends network coverage from a central router to previously uncovered areas.

Operating the Device

Once configured, the Rebel KOM1030 operates automatically to extend your Wi-Fi signal. Observe the indicator lights for status information.

Indicator Lights

• Power Indicator: Solid light indicates the device is powered on.
• Wi-Fi Indicator:
  • Solid: Successfully connected to the main Wi-Fi network and extending signal.
  • Blinking: Attempting to connect or WPS pairing in progress.
  • Off: No Wi-Fi connection or device is not configured.
• LAN Indicator: Solid or blinking light indicates an active connection through the Ethernet port.

Ethernet Port Usage

The integrated LAN port allows you to connect a wired device (e.g., a desktop computer, gaming console, or smart TV) to the repeater, providing network access to devices that do not have Wi-Fi capabilities or for a more stable connection.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
• Firmware Updates: Periodically check the manufacturer's website for firmware updates. Updates can improve performance, add features, or fix bugs. Refer to the manufacturer's instructions for updating firmware.
• Resetting the Device: If the device is not functioning correctly, you may perform a factory reset. Locate the "Reset" button (often a small pinhole) on the device. With the device powered on, use a paperclip or similar pointed object to press and hold the Reset button for approximately 5-10 seconds until the lights flash. The device will revert to factory default settings, requiring re-configuration.

Troubleshooting

No Internet Access After Setup

• Ensure the repeater is within range of your main router and receiving a strong signal.
• Verify that your main router has an active internet connection.
• Re-run the setup process, ensuring the correct Wi-Fi network and password are selected.
• Try relocating the repeater to a different power outlet or a more optimal position.

Slow Connection Speed

• The repeater might be too far from the main router. Move it closer to improve signal strength.
• Check for interference from other electronic devices (e.g., microwaves, cordless phones).
• Ensure your main router is providing adequate speed.
• Consider connecting wired devices directly to the repeater's LAN port for potentially better performance.

WPS Setup Fails

• Ensure you press the WPS button on both the router and the repeater within the specified time frame (usually 2 minutes).
• Some routers may require WPS to be enabled in their settings.
• If WPS continues to fail, use the web browser setup method.

Cannot Access Web Management Page

• Ensure your device is connected to the repeater's Wi-Fi network (not your main router's).
• Verify the IP address or domain name entered in the browser is correct.
• Try clearing your browser's cache or using a different browser.
• Perform a factory reset on the repeater and try again.

Specifications

Image: The Rebel KOM1030 Wi-Fi Signal Amplifier displayed alongside its key technical specifications, including IEEE 802.11 b/g/n, 2.4 GHz frequency, and 300 Mb/s data rate.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Rebel brand website. Specific warranty terms may vary by region and retailer.

Contact Support: If you encounter issues not covered in this manual, please contact Rebel customer support through their official channels.