UpBright 12.6V AC/DC Adapter User Manual for Cholas KZD02 Massage Gun

Product Overview

This manual provides instructions for the UpBright 12.6V AC/DC Adapter, designed to power and charge compatible devices such as the Cholas KZD02 Deep Tissue Massage Gun. This adapter features a barrel round plug tip and incorporates multiple safety protections to ensure reliable operation.

1. Setup and Compatibility

Before connecting the adapter, please verify that your device requires a 12.6V DC input with a barrel round plug. This adapter is specifically designed for devices with these specifications.

Image showing a barrel plug with a green checkmark and a USB-C plug with a red X, indicating compatibility.

Figure 1.1: The adapter features a barrel round plug tip. It is not compatible with USB Type-C connectors.

1.1 Compatible Devices

This UpBright 12.6V AC/DC Adapter is compatible with various massage guns requiring a 12.6V DC input, including but not limited to:

Cholas KZD02 30 Speed Deep Tissue Massage Gun
Zone Gym Massage Gun
HeaDot Massage Gun
Tyiaus Massage Gun
Jam Gym Massage Gun
Kelices Massage Gun
Fantasy Massage Gun
Olsky Massage Gun
Fylina Massage Gun
Sylphim Massage Gun
Neprock Massage Gun
Aquapro Massage Gun
Valano J01 J-01 Massage Guns

Important: This adapter is NOT compatible with 16.8V, 18V, or 24V versions of massage guns.

Image showing several massage guns with green checkmarks for compatibility and others with red X marks for incompatibility based on voltage.

Figure 1.2: Visual guide for compatible and incompatible massage gun models based on voltage requirements.

1.2 Connecting the Adapter

Ensure the massage gun or compatible device is turned off.
Insert the barrel round plug tip of the adapter firmly into the charging port of your device.
Plug the AC adapter into a standard wall outlet (100-240VAC, 50/60Hz).
The device should indicate that it is charging (e.g., an LED indicator).

Image showing the UpBright AC adapter connected to a Cholas massage gun.

Figure 1.3: Example of the adapter connected to a Cholas massage gun for charging.

2. Operating Instructions

The UpBright AC/DC Adapter is designed for straightforward operation. Once connected, it will automatically begin providing power or charging your compatible device.

2.1 Safety Protections

This adapter is equipped with advanced safety features to protect both the adapter and your connected device:

OVP (Over Voltage Output Protection): Prevents damage from excessive voltage output.
OCP (Over Current Output Protection): Guards against damage from excessive current flow.
SCP (Short Circuit Output Protection): Protects against short circuits.
Over-Temp Protection: Prevents overheating of the adapter.
Overcharge Protection: Safeguards the device's battery from overcharging.

Image showing the internal components of the adapter with labels for various protection features like short-circuit, over-temp, over-voltage, and overcurrent protection.

Figure 2.1: Illustration of the adapter's internal safety protection mechanisms.

3. Maintenance

Proper care and maintenance will extend the lifespan of your UpBright AC/DC Adapter.

Storage: Store the adapter in a cool, dry place when not in use.
Cleaning: Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
Cable Care: Avoid bending or crimping the cable excessively, especially near the connectors. Do not pull the cable to unplug the adapter; always grasp the plug itself.
Environmental Conditions: Do not expose the adapter to water, high humidity, or extreme temperatures.

4. Troubleshooting

If you encounter issues with your UpBright AC/DC Adapter, refer to the following common solutions:

Problem	Possible Cause	Solution
Device not charging/powering on.	Loose connection. Incorrect voltage/connector type. Faulty power outlet. Device issue.	Ensure all connections are secure. Verify device compatibility (12.6V, barrel plug). Test the outlet with another appliance. Consult your device's manual or manufacturer.
Adapter feels warm during use.	Normal operation, or heavy load.	This is often normal. If it becomes excessively hot or emits smoke/smell, unplug immediately and discontinue use.
Adapter not working after a power surge.	Internal protection triggered or damage.	The adapter's protection circuits (OVP, OCP, SCP) may have activated. If it does not reset, the adapter may need replacement.

If the problem persists after trying these steps, please contact UpBright customer support.

5. Specifications

Detailed technical specifications for the UpBright 12.6V AC/DC Adapter:

Image of the UpBright AC/DC adapter showing its label with input and output specifications.

Figure 5.1: UpBright 12.6V AC/DC Adapter with specification label.

Model: Cholas KZD02 Power Supply
Input Voltage: 100-240VAC, 50/60Hz
Output Voltage: 12.6V DC
Output Current: 0.8A (800mA)
Wattage: 10.08 Watts
Connector Type: Barrel Round Plug Tip
Product Dimensions: Approximately 3 x 3 x 1 inches
Item Weight: Approximately 2.39 ounces
Safety Features: OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection), Over-Temp Protection, Overcharge Protection.
Included Components: 1 x AC Adapter

6. Warranty and Support

UpBright stands behind the quality of its products.

Refund Policy: 30-day refund period from the date of purchase.
Exchange Policy: 24-month exchange period for defective units.

For warranty claims, technical assistance, or any questions regarding your UpBright AC/DC Adapter, please contact UpBright customer support through the retailer where the product was purchased or visit the official UpBright store online.

Manufacturer: Upbright

Brand Store: Visit the UPBRIGHT Store on Amazon

UPBRIGHT Cholas KZD02 Power Supply

UpBright 12.6V AC/DC Adapter User Manual