1. Introduction
Thank you for choosing the SEBSON LED Outdoor Luminaire with Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor light. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Instructions
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the power supply is disconnected before installation, maintenance, or repair.
- This product is designed for outdoor use only (IP65 rated).
- Do not attempt to modify or repair the luminaire yourself. Contact qualified personnel for service.
- The integrated LEDs are non-replaceable. Do not attempt to remove or replace them.
- Avoid looking directly into the light source when it is active.
3. Package Contents
Verify that all components are present and undamaged:
- SEBSON LED Outdoor Luminaire with Motion Detector (Model: WAL_SENSOR_L_INT)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
4. Product Features
- Integrated Motion Detector: PIR sensor with a detection range of 9 meters and a 140° angle.
- Adjustable Settings: Customize light sensitivity (3-2,000 LUX) and illumination duration (10 seconds - 5 minutes).
- Rotatable Light Head: The light can be rotated 90° vertically and 330° horizontally for optimal light direction.
- Durable Construction: Anthracite plastic casing with IP65 protection, suitable for outdoor environments.
- Bright Illumination: 15W, 1300lm, 6000K cool white light.
Image: Key features of the SEBSON LED outdoor luminaire, highlighting the motion detector, programmability, IP65 rating, and rotatable head.
Image: Illustration of the luminaire's rotatable head, showing 90° vertical and 330° horizontal adjustment capabilities.
5. Setup and Installation
Important: Ensure the main power supply is switched off before beginning installation.
- Choose Location: Select a suitable outdoor location for wall mounting, ensuring the motion detector has an unobstructed view of the desired detection area.
- Prepare Mounting Surface: Mark the drilling points on the wall using the luminaire's mounting plate as a template.
- Drill Holes: Drill holes at the marked positions and insert appropriate wall plugs.
- Wiring: Connect the luminaire's electrical wires to your mains power supply. Ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated.
- Mount Luminaire: Secure the luminaire to the wall using the provided screws. Ensure it is firmly attached.
- Adjust Light Head: Rotate the light head to the desired vertical (up to 90°) and horizontal (up to 330°) position.
Image: Rear view of the luminaire, showing the mounting plate and attachment points for installation.
6. Operating and Motion Sensor Settings
The motion detector has two adjustable settings: LUX (light sensitivity) and TIME (illumination duration).
- Accessing Controls: The adjustment dials are located on the motion sensor. Gently rotate the sensor cover to reveal the dials.
- LUX Setting (Light Sensitivity):
- This dial controls the ambient light level at which the sensor activates the light.
- Rotate towards the 'sun' symbol for activation during both day and night (high LUX).
- Rotate towards the 'moon' symbol for activation only in low light conditions (low LUX, 3-2,000 LUX range).
- TIME Setting (Illumination Duration):
- This dial sets how long the light remains on after motion is detected.
- Adjust from 10 seconds to 5 minutes.
- Detection Range: The motion sensor has a maximum detection range of 9 meters and a 140° angle. Consider the mounting height (recommended 1.80m - 2.50m) for optimal performance.
Image: Close-up of the motion sensor, showing the protective cover and the underlying LUX and TIME adjustment dials.
Image: Diagram illustrating how to access and adjust the LUX and TIME settings on the motion sensor.
Image: Diagram showing the motion detection range of the luminaire, indicating a 140° angle and a maximum distance of 9 meters.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your luminaire.
- Cleaning: Clean the luminaire's surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the luminaire and its wiring for any signs of damage or wear.
- LEDs: The integrated LEDs are designed for a long lifespan and are not user-replaceable.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. LUX setting too low. Motion not detected. | Check power connection and circuit breaker. Adjust LUX setting towards 'sun' symbol. Verify detection area and sensor position. |
| Light stays on continuously. | Continuous motion in detection area. TIME setting too long. Sensor malfunction. | Remove obstructions or reposition sensor. Adjust TIME setting to a shorter duration. Contact support if problem persists. |
| Light flashes or flickers. | Unstable power supply. Loose wiring connection. | Consult an electrician to check power supply. Ensure all wiring connections are secure (power off first). |
| Motion detector not sensitive enough. | LUX setting too high. Sensor obstructed. Mounting height incorrect. | Adjust LUX setting towards 'moon' symbol. Clear any obstructions from sensor view. Ensure mounting height is within 1.80m - 2.50m. |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Brand | SEBSON |
| Model Number | WAL_SENSOR_L_INT |
| Product Dimensions (L x W x H) | 23 x 7.8 x 13.4 cm |
| Weight | 381 g |
| IP Rating | IP65 |
| Color | Anthracite |
| Material | Plastic |
| Voltage | 230 Volts |
| Wattage | 15 Watts |
| Luminous Flux | 1300 lm |
| Color Temperature | 6000 Kelvin (Cool White) |
| Color Rendering Index (CRI) | 80.00 |
| Average Lifespan | 15000 Hours |
| Motion Detection Range | 9m / 140° |
| Adjustable Illumination Duration | 10 seconds - 5 minutes |
| Adjustable Light Sensitivity | 3-2,000 LUX |
| Rotatability | 90° vertical, 330° horizontal |
| Power Source | Corded Electric |
| Installation Type | Wall Mount |
| Dimmable | No |
| Country of Origin | China |
Image: Technical drawing showing the dimensions of the SEBSON LED outdoor luminaire in millimeters.
10. Warranty and Support
For warranty information and customer support, please refer to the retailer or manufacturer's official website. Specific details regarding spare parts availability and software updates are not provided in the product information.
