Qaba Kids Height Adjustable Desk and Chair Set Instruction Manual

1. Introduction

This manual provides essential information for the assembly, setup, operation, and maintenance of your Qaba Kids Height Adjustable Desk and Chair Set. Please read these instructions thoroughly before use to ensure proper function and safety.

The Qaba Kids Desk and Chair Set is designed to provide a comfortable and ergonomic learning environment for children aged 6-12 years. It features adjustable height for both the desk and chair, a tiltable desktop, an integrated USB LED lamp, and convenient storage solutions.

Image 1.1: The Qaba Kids Height Adjustable Desk and Chair Set.

2. Safety Information

CALIFORNIA PROPOSITION 65 WARNING:

This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

• Ensure all components are securely fastened before use.
• Do not allow children to climb on the desk or chair.
• Supervise children during use, especially when adjusting height or desktop tilt.
• Keep small parts away from young children to prevent choking hazards.
• Place the desk on a flat, stable surface.

3. Package Contents

Please verify that all components are present and undamaged before beginning assembly. Refer to the assembly instructions included in the product packaging for a detailed list of parts and hardware.

• Desk frame and desktop components
• Chair frame and seat/backrest components
• USB LED Lamp
• Book Holder
• Storage Drawer
• Pencil Case and Cup Holder
• Assembly hardware (screws, bolts, tools)
• Instruction Manual

4. Assembly Instructions

Assembly is required for this product. A detailed step-by-step assembly guide with diagrams is included in your product packaging. Please follow those instructions carefully. All necessary tools for assembly are typically provided.

General Assembly Tips:

• Lay out all parts and hardware before starting.
• Identify each component by referring to the parts list in the included manual.
• Do not overtighten screws during initial assembly; tighten fully once all parts are aligned.
• Seek assistance if needed, especially for lifting heavier components.

Image 4.1: A child using the fully assembled desk and chair set.

5. Product Features

The Qaba Kids Desk and Chair Set is equipped with several features designed for comfort, functionality, and adaptability:

• Height Adjustable Design: Both the desk and chair can be adjusted in height to accommodate children as they grow, promoting proper posture.
• Tiltable Desktop: The desktop can be tilted up to 45 degrees, providing optimal angles for various activities such as writing (0-10°), reading (10-20°), and drawing (20-45°).
• Integrated USB LED Lamp: A flexible LED lamp with three adjustable color temperatures (3500K Natural Light, 4500K Cool Light, 6000K Warm Light) is included to reduce eye strain.
• Book Holder: A removable book holder keeps reading materials at an ideal distance and angle.
• Storage Solutions: Includes a spacious pull-out storage drawer, a pencil case, and a cup holder to keep study essentials organized.
• Sturdy Construction: Crafted with an MDF tabletop and robust steel legs for stability and durability.
• Non-slip Pads: Equipped with non-slip pads to protect floors and enhance stability.

Image 5.1: Overview of the fully equipped desk features.

Image 5.2: The desktop can be tilted for different activities.

Image 5.3: The USB LED lamp offers three color temperature settings.

6. Setup and Adjustments

After assembly, adjust the desk and chair to suit the user's height and comfort.

6.1. Height Adjustment (Desk and Chair)

Both the desk and chair feature a lift-to-adjust mechanism. Locate the adjustment knobs or levers on the legs of the desk and chair. Loosen them, adjust the height to the desired level, and then securely tighten the knobs/levers. Ensure both sides are adjusted evenly to maintain stability.

Image 6.1: Height adjustment points for the desk and chair.

6.2. Desktop Tilt Adjustment

The desktop can be tilted to various angles. To adjust, lift the front edge of the desktop. It will click into different positions. Select the angle appropriate for the activity (e.g., flatter for writing, more angled for reading or drawing). To return to a flat position, lift the desktop to its highest point and then lower it completely.

7. Operating Instructions

7.1. Using the LED Lamp

Connect the USB cable of the lamp to a compatible USB power source (e.g., a computer, wall adapter). Use the touch controls on the lamp base to turn it on/off and cycle through the three color temperature settings (Natural, Cool, Warm Light).

7.2. Using the Book Holder

The book holder can be attached to the desktop. Place your book or tablet on the holder for hands-free reading at an ergonomic angle.

7.3. Storage Drawer and Accessories

Utilize the pull-out drawer beneath the desktop for storing papers, notebooks, and other supplies. The integrated pencil case and cup holder provide convenient access to writing instruments and beverages.

8. Maintenance

To maintain the condition and longevity of your Qaba Kids Desk and Chair Set:

• Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary.
• Environment: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect material integrity.

9. Troubleshooting

If you encounter any issues with your desk and chair set, consider the following common solutions:

• Instability/Wobbling: Ensure all assembly hardware is securely tightened. Verify the desk and chair are on a flat, even surface. Adjust leg levelers if present.
• Difficulty Adjusting Height: Check that adjustment knobs/levers are fully loosened before attempting to change height. Ensure no obstructions are preventing movement.
• LED Lamp Not Working: Confirm the USB cable is properly connected to a functioning power source. Try a different USB port or adapter.
• Desktop Not Tilting: Ensure no items are obstructing the tilting mechanism.

If problems persist, please contact customer support for further assistance.

10. Specifications

Image 10.1: Detailed dimensions of the desk and chair.

11. Product Video

12. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer, Qaba (Aosom LLC), directly. Refer to the contact information provided in your product packaging or visit the official Qaba website for assistance.

Manufacturer: Aosom LLC