Introduction
The Lorex N841A82 is an 8-channel Network Video Recorder (NVR) designed for advanced security surveillance. This system supports 4K (8MP) Ultra HD resolution recording and viewing across all channels, providing superior detail for your security footage. It features a pre-installed 2TB hard drive, expandable up to 6TB, for extensive video storage. The NVR integrates with Lorex Fusion technology, allowing connection with compatible Wi-Fi products such as cameras, doorbells, and floodlights.
Key features include Smart Motion Detection for distinguishing between people and vehicles, remote viewing via the Lorex Home app, and compatibility with smart home voice control systems like Amazon Alexa and Google Assistant. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Lorex N841A82 NVR.

Figure 1: Front view of the Lorex N841A82 NVR, showing the sleek white design with "4K Ultra HD NVR" and "FUSION" branding.
Setup
Follow these steps to set up your Lorex N841A82 NVR system.
- Unpack the NVR: Carefully remove all components from the packaging. Ensure you have the NVR unit, power adapter, mouse, and any included cables.
- Connect Cameras: Connect your IP cameras to the NVR's PoE (Power over Ethernet) ports using Ethernet cables. The NVR has 8 channels for direct camera connections.
- Connect to a Display: Connect the NVR to a monitor or TV using an HDMI or VGA cable.
- Connect Mouse: Plug the included USB mouse into one of the USB ports on the NVR.
- Network Connection: Connect the NVR to your router using an Ethernet cable for internet access, which is required for remote viewing and firmware updates.
- Power On: Connect the power adapter to the NVR and then to a power outlet. The NVR will power on automatically.
- Initial Configuration: Follow the on-screen prompts to complete the initial setup, including setting a password, time zone, and network settings.

Figure 2: Rear view of the Lorex N841A82 NVR, displaying the power input, Ethernet ports, VGA, HDMI, USB, and audio ports for connections.
Operating the NVR
Lorex Home Mobile App
The Lorex Home app allows remote viewing and control of your security system from a smartphone or tablet. To use:
- Download the free Lorex Home app from your device's app store.
- Create an account or log in.
- Scan the QR code displayed on your NVR (usually during initial setup or in the NVR's network settings) to add your system.
- Once added, you can view live footage, review recordings, and receive motion-activated push notifications and email alerts with screenshot attachments.
Smart Motion Detection
When paired with compatible Smart IP cameras, the NVR utilizes advanced person and vehicle detection. This feature minimizes false alarms by sending notifications only for relevant motion events. Use the Smart Search function to filter recorded footage by area, time/date, and specific detection types (person or vehicle).
Voice Control and Smart Home Integration
The NVR is compatible with Amazon Alexa, Google Assistant, Apple TV, and Chromecast. This allows for hands-free control and viewing of your security footage. Use simple voice commands to activate camera features or access live and recorded video directly on your smart TV or compatible smart display.

Figure 3: The Lorex N841A82 NVR positioned on a surface next to a smart display, illustrating its integration with smart home ecosystems for viewing camera feeds.
Maintenance
Regular maintenance ensures optimal performance and longevity of your NVR system.
- Firmware Updates: Periodically check for and install firmware updates through the NVR's system settings or the Lorex Home app. Updates often include performance improvements and security patches.
- Hard Drive Health: Monitor the health of the internal hard drive (HDD) through the NVR's system menu. A failing HDD can lead to recording issues. Back up important footage regularly.
- Cleaning: Keep the NVR unit clean and free from dust. Use a soft, dry cloth to wipe the exterior. Ensure ventilation openings are not blocked to prevent overheating.
- Password Security: Regularly change your NVR and Lorex Home app passwords to strong, unique combinations to protect against unauthorized access.
Troubleshooting
This section addresses common issues you might encounter with your Lorex N841A82 NVR.
- No Video Output to Monitor:
- Ensure the HDMI/VGA cable is securely connected to both the NVR and the monitor.
- Verify the monitor is powered on and set to the correct input source.
- Try a different HDMI/VGA cable or monitor if available.
- Cameras Not Displaying:
- Check that cameras are properly connected to the NVR's PoE ports.
- Ensure Ethernet cables are not damaged.
- Verify cameras are powered on (PoE provides power, but check connections).
- If using Fusion Wi-Fi cameras, ensure they are properly paired and connected to your network.
- No Recording / Hard Drive Issues:
- Access the NVR's system settings to check the hard drive status.
- If the HDD is reported as "dead" or "uninitialized," it may need to be formatted or replaced. Note: Formatting will erase all recorded data.
- Ensure recording schedules are correctly configured.
- Remote Viewing Not Working (Lorex Home App):
- Ensure the NVR is connected to the internet via an Ethernet cable.
- Check your router's internet connection.
- Verify the NVR is added correctly to your Lorex Home app account.
- Ensure your smartphone/tablet has a stable internet connection.
- NVR is Registered to Another User (for Renewed units):
- If you purchased a renewed unit and it's linked to a previous owner, contact Lorex support for assistance with factory resetting and re-registering the device.
Specifications
| Model Number | N841A82 |
| Channels | 8 |
| Video Resolution | Up to 4K (8MP) Ultra HD |
| Hard Disk Size | 2TB (Pre-installed), expandable up to 6TB |
| Connectivity | Ethernet (PoE), Wi-Fi (for Fusion compatible devices) |
| Compatible Devices | IP Cameras, Wi-Fi Cameras, Doorbells, Floodlights, Smartphone, Tablet, Television |
| Smart Home Integration | Amazon Alexa, Google Assistant, Apple TV, Chromecast |
| Video Compression | HEVC / H.265 |
| Product Dimensions | 9.8 x 12.8 x 2.4 inches |
| Item Weight | 6.32 pounds |
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Lorex website or contact Lorex customer service directly. Keep your purchase receipt and model number (N841A82) handy when contacting support.
Lorex Official Website: www.lorex.com





