1. Product Overview
The Fantini Cosmi ASPIRVELO AIR ECOCOMFORT 2.0 Smart (Model AP19992) is a state-of-the-art decentralized ventilation and suction unit designed for optimal indoor air quality and energy efficiency. It features a highly efficient regenerative ceramic heat exchanger, capable of recovering up to 90% of heat, making it ideal for maintaining comfortable indoor temperatures while ensuring continuous air exchange.
This unit is equipped with advanced sensors for air flow temperature, ambient temperature, relative humidity, luminosity, and indoor air quality (VOC), allowing for intelligent and adaptive operation. Its low noise level and facade insulation capabilities contribute to a quiet and comfortable living environment.
Image: The ECOCOMFORT 2.0 Smart unit, showcasing its modern design and connectivity with a smartphone application.
Image: Front and top views of the ECOCOMFORT 2.0 Smart unit, highlighting its compact and award-winning design.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Electrical Safety: Ensure the unit is connected to a properly grounded electrical outlet. Disconnect power before performing any maintenance or cleaning.
- Installation: Installation must be performed by qualified personnel in accordance with local electrical and building codes. Do not install the unit in areas with excessive moisture or direct water exposure.
- Operation: Do not block the air inlets or outlets. Keep children and pets away from the unit during operation.
- Maintenance: Use only genuine Fantini Cosmi replacement parts. Do not attempt to repair the unit yourself. Contact qualified service personnel for repairs.
- Cleaning: Use a soft, dry cloth for cleaning the exterior. Do not use abrasive cleaners or solvents.
3. Package Contents
Verify that all components are present in the package:
- Fantini Cosmi ASPIRVELO AIR ECOCOMFORT 2.0 Smart Unit (AP19992)
- External foldable grille
- Telescopic tube
- Filter cartridge
- Electronic unit
- Mounting hardware (screws, anchors)
- User Manual (this document)
4. Setup and Installation
The ECOCOMFORT 2.0 Smart unit is designed for wall or ceiling mounting. Ensure the installation location allows for proper air circulation and access for maintenance.
Image: The ECOCOMFORT 2.0 Smart unit shown mounted on a wall and a side view illustrating its telescopic design for installation.
4.1. Site Preparation
- Choose a suitable location on an exterior wall, away from direct heat sources or obstructions.
- Ensure the wall thickness is compatible with the telescopic tube.
- Drill a circular opening with a nominal diameter of 160 mm through the wall.
4.2. Unit Assembly and Mounting
- Insert the telescopic tube into the prepared wall opening.
- Attach the external foldable grille to the exterior end of the telescopic tube.
- Connect the electronic unit to the interior end of the telescopic tube, ensuring all electrical connections are secure and conform to local regulations.
- Mount the main unit housing to the wall using the provided mounting hardware. Ensure it is level and securely fastened.
- Install the filter cartridge into its designated slot within the unit.
- Secure the cover to the unit.
5. Operating Instructions
The ECOCOMFORT 2.0 Smart unit can be controlled via its integrated controls or through the dedicated smartphone application, Fantini Cosmi Intelliclima+.
Image: The Fantini Cosmi Intelliclima+ smartphone application, used for controlling the ECOCOMFORT 2.0 Smart unit.
5.1. Initial Power-On
- After installation, restore power to the unit.
- The unit will perform a self-test. Refer to the LED indicators for status.
5.2. Connecting to the Intelliclima+ App
- Download the "Intelliclima+" app from your smartphone's app store (available on Google Play and Apple App Store).
- Follow the in-app instructions to register an account and add your ECOCOMFORT 2.0 Smart unit. This typically involves connecting to the unit's Wi-Fi network during setup.
- Once connected, you can control the unit remotely and access advanced features.
5.3. Operating Modes
The unit offers various operating modes to suit different needs:
- Automatic Mode: The unit intelligently adjusts ventilation based on sensor readings (temperature, humidity, VOC, luminosity) to maintain optimal indoor air quality and comfort.
- Manual Mode: Allows users to manually set fan speed and direction (inflow/outflow).
- Sleep Mode: Operates at a reduced fan speed for quieter operation during nighttime hours.
- Boost Mode: Provides maximum ventilation for rapid air exchange when needed.
- Dehumidification: Utilizes sensors to manage indoor humidity levels.
Refer to the Intelliclima+ app for detailed control options and scheduling features.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your ECOCOMFORT 2.0 Smart unit.
Image: Exploded view of the ECOCOMFORT 2.0 Smart unit, showing its internal components for maintenance reference.
- External foldable grille
- Telescopic tube
- Filter
- Cartridge
- Electronic unit
- Electronic unit cover
- Cover
6.1. Filter Cleaning and Replacement
The unit's filter should be cleaned regularly and replaced periodically to maintain air quality and unit efficiency. The app may provide notifications for filter maintenance.
- Disconnect power to the unit before proceeding.
- Carefully remove the front cover of the unit.
- Locate and remove the filter cartridge.
- Clean the filter using a vacuum cleaner or by gently rinsing with water (if washable, refer to filter type). Allow it to dry completely before reinstallation.
- If the filter is damaged or excessively dirty, replace it with a genuine Fantini Cosmi replacement filter.
- Reinstall the clean/new filter and secure the front cover.
- Restore power to the unit.
6.2. Exterior Cleaning
Wipe the exterior surfaces of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
7. Troubleshooting
If you encounter issues with your ECOCOMFORT 2.0 Smart unit, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | No power supply; Unit not properly connected. | Check power outlet and circuit breaker. Ensure all electrical connections are secure. |
| Poor air circulation / Low efficiency | Clogged filter; Blocked air inlets/outlets. | Clean or replace the filter. Ensure no obstructions are blocking the unit's vents. |
| Unit is noisy | Loose components; Fan obstruction; Incorrect installation. | Check for loose parts. Ensure nothing is interfering with the fan blades. Verify proper installation. |
| App connectivity issues | Wi-Fi signal weak; Incorrect app setup; Unit not in pairing mode. | Ensure strong Wi-Fi signal. Re-attempt app pairing process. Restart unit and router. |
| Red LED blinking (filter warning) | Filter needs cleaning or replacement; Filter counter not reset. | Clean or replace the filter. Reset the filter counter via the app or unit controls after maintenance. |
If the problem persists after attempting these solutions, please contact Fantini Cosmi customer support.
8. Specifications
Technical specifications for the Fantini Cosmi ASPIRVELO AIR ECOCOMFORT 2.0 Smart (AP19992):
Image: Dimensional drawing of the ECOCOMFORT 2.0 Smart unit, with key measurements in millimeters.
| Feature | Detail |
|---|---|
| Model Number | AP19992 |
| Nominal Diameter | 160 mm |
| Dimensions (L x W x H) | 50 x 50 x 28 cm |
| Weight | 3 kg |
| Voltage | 240 Volts (AC) |
| Power | 3516 Watts |
| Noise Level | 40 dB |
| Heat Recovery Efficiency | Up to 90% |
| Sensor Types | Air flow temperature, Ambient temperature, Relative humidity, Luminosity, Indoor Air Quality (VOC) |
| Recommended Room Size | Up to 36 m² |
| Installation Type | Integrated (Wall/Ceiling Mount) |
| Special Features | Dehumidifier function, Smart control via app |
| Certification | CE Certified |
9. Warranty and Support
Fantini Cosmi products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Fantini Cosmi website. Keep your proof of purchase for warranty claims.
9.1. Customer Support
For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Fantini Cosmi customer support through their official website or the contact information provided in your product documentation.
Note: Information regarding spare parts availability may vary.
