Peak Design Wireless Charging Stand (Model M-CS-BK-1) Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Peak Design Wireless Charging Stand, Model M-CS-BK-1. This device is designed to provide convenient and efficient wireless charging for MagSafe-compatible phones and Peak Design Mobile cases, offering a customizable viewing experience.

Image: The Peak Design Wireless Charging Stand, black, in its upright position, connected to a charging cable.

What's in the Box

Verify that all components are present in the packaging:

• 1x Peak Design Wireless Charging Stand
• 1x USB-C Cable

Image: The package contents, showing the black wireless charging stand, a USB-C to USB-C cable, and three small cable routing clips.

Features

• Wireless Charging: Supports Qi1 charging with capacities of 15W, 10W, 7.5W, and 5W, automatically adjusting to the device's profile.
• Magnetic Mounting: Features built-in magnetic technology for a secure and instant connection with MagSafe-enabled phones and Peak Design Mobile cases.
• Adjustable Viewing Angle: A silky-smooth friction hinge allows for infinite viewing angle adjustments, supporting both portrait and landscape modes.
• Durable Construction: Crafted from solid machined and anodized aluminum with a grippy silicone base for stability.
• Portable Design: Folds flat for easy storage and transport.

Setup

1. Unpack Components: Carefully remove the Wireless Charging Stand and USB-C cable from the packaging.
2. Position the Stand: Place the stand on a stable, flat surface. The grippy silicone base will help prevent movement.
3. Connect Power: Insert one end of the provided USB-C cable into the USB-C port located on the back of the charging stand. Connect the other end of the USB-C cable to a compatible USB-C power adapter (not included) and plug it into a wall outlet.
4. Adjust Angle: Gently push or pull the top section of the stand to achieve your desired viewing angle. The friction hinge will hold it in place.

Image: A hand adjusting the angle of the charging stand, highlighting its flexible friction hinge.

Operating Instructions

1. Placing Your Device: Ensure your phone is MagSafe-compatible or housed in a Peak Design Mobile case. Align the back of your phone with the magnetic charging pad on the stand. The magnets will securely snap your phone into place.
2. Charging Confirmation: Your phone should indicate that it is charging. The stand provides optimal charging alignment and heat dissipation for efficient power delivery.
3. Adjusting Orientation: The stand supports both portrait and landscape orientations. Simply rotate your phone while it is magnetically attached to switch between modes.
4. Folding Flat: For charging earbuds or other Qi-compatible devices, or for compact storage, the stand can be folded completely flat.

Image: A smartphone securely attached to the charging stand, demonstrating its magnetic hold and upright display.

Image: The charging stand holding a smartphone, illustrating its versatility for both portrait and landscape viewing.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the stand. Avoid abrasive cleaners or solvents that may damage the finish.
• Cable Care: Ensure the USB-C cable is not kinked or bent sharply to prolong its lifespan.
• Storage: When not in use, the stand can be folded flat for compact storage.

Image: The charging stand folded into a flat, compact form, ideal for travel or discreet placement.

Troubleshooting

• Device Not Charging:
  • Ensure the USB-C cable is securely connected to both the stand and a functioning power adapter.
  • Verify that your phone is MagSafe-compatible or using a Peak Design Mobile case.
  • Check for any obstructions between the phone and the charging pad.
• Unstable Phone:
  • Confirm the phone is properly aligned with the magnetic charging pad.
  • Ensure the stand is placed on a flat, stable surface.
• Angle Adjustment Issues:
  • The friction hinge is designed to be firm. Apply gentle, consistent pressure to adjust the angle.

Specifications

Warranty and Support

Peak Design products are designed for durability and are backed by a lifetime guarantee. For detailed warranty information or technical support, please visit the official Peak Design website or contact their customer service directly.

Manufacturer: Peak Design