Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your beFree Sound BFS-5.1 5.1 Channel Bluetooth Surround Sound Speaker System. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience. Keep this manual for future reference.
Package Contents
Carefully unpack all components and ensure the following items are included:
- One 5.25" Amplifier (Subwoofer)
- Five 3" Satellite Speakers
- One Remote Control (requires 2 AAA batteries, not included)
- One Audio Cable
- One FM Antenna
- Three DVD Connection Cables
Image: All components of the beFree Sound 5.1 Channel Speaker System, including the subwoofer, five satellite speakers, and remote control.
Image: The included remote control and various connection cables (audio, FM antenna, DVD connection cables).
Product Overview
Subwoofer (Amplifier Unit)
The subwoofer unit houses the main amplifier, control panel, and various input/output ports. It features a 5.25-inch woofer for deep bass.
Image: Front view of the subwoofer unit with approximate dimensions (11.5" depth, 6.5" width, 12.75" height).
Satellite Speakers
The system includes five 3-inch satellite speakers for surround sound. These speakers connect to the subwoofer unit.
Image: A single satellite speaker with approximate dimensions (3" depth, 4" width, 8.25" height).
Remote Control
The included remote control allows for convenient operation of all system functions from a distance. It requires two AAA batteries (not included).
Setup
1. Speaker Placement
- Place the subwoofer in a central location, preferably on the floor, to optimize bass distribution.
- Position the center speaker directly above or below your TV/monitor.
- Place the front left and right speakers equidistant from your listening position, to the left and right of your TV.
- Position the rear left and right speakers behind your listening position, facing towards you, to create an immersive surround sound experience.
2. Connections
Refer to the rear panel diagram for correct connections.
Image: Rear panel of the subwoofer showing power switch, AC IN, AUX Audio Input, FM Antenna port, DVD Audio Input, and Audio Output for satellite speakers.
- Connect Satellite Speakers: Connect the five satellite speakers to the corresponding AUDIO OUTPUT ports on the rear of the subwoofer unit. Ensure correct polarity (red to red, black to black).
- Connect Audio Source (AUX): For general audio devices (e.g., smartphone, tablet, PC), connect the included 3.5mm to RCA audio cable from your device's audio output to the AUX AUDIO INPUT (L/R) ports on the subwoofer.
- Connect DVD Player (5.1 Channel): For a 5.1 channel DVD player or similar device, use the three included DVD connection cables to connect the corresponding outputs from your DVD player to the DVD AUDIO INPUT ports (FL, FR, CEN, SW, SL, SR) on the subwoofer. Match the colors and labels carefully.
- Connect FM Antenna: Insert the FM antenna into the FM ANT port on the rear panel. Extend the antenna for better reception.
- Power Connection: Ensure the power switch on the rear panel is in the OFF position. Connect the power cord to the AC IN port and then plug it into a standard wall outlet.
Operating Instructions
1. Power On/Off
- Flip the POWER SWITCH on the rear panel to the ON position.
- Press the STANDBY button on the front panel or the remote control to turn the system on or off.
2. Input Selection
Press the INPUT button on the front panel or the remote control repeatedly to cycle through available input modes: Bluetooth (BT), USB, SD, FM, AUX, DVD.
3. Bluetooth Pairing
- Select BT mode using the INPUT button. The display will show "BT" and flash, indicating it's in pairing mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "BFS-5.1" (or similar) from the list. Once paired, the system will confirm with an audible tone, and "BT" will stop flashing.
- You can now play audio from your device through the speaker system.
4. USB/SD Playback
- Insert a USB flash drive or SD card (with MP3 audio files) into the corresponding port on the front panel.
- Select USB or SD mode using the INPUT button. The system will automatically begin playing audio files.
- Use the remote control's playback buttons (Play/Pause, Next, Previous) to control playback.
5. FM Radio Operation
- Select FM mode using the INPUT button.
- Press the AUTO button on the remote control to automatically scan and save available FM stations.
- Use the CH- / CH+ buttons to navigate through saved stations.
- Use the TUNE- / TUNE+ buttons for manual tuning.
6. Volume Control
- Use the VOL+ / VOL- buttons on the front panel or remote control to adjust the master volume.
- The remote control also provides individual volume adjustments for the subwoofer (SW), center (CEN), front left (FL), front right (FR), surround left (SL), and surround right (SR) channels.
7. Remote Control Functions
The remote control provides comprehensive control over the system:
- Power: Turns the system on/off (standby).
- Input Selection: BT, USB, SD, FM, AUX, DVD.
- Volume Control: Master volume and individual channel volume.
- Playback Controls: Play/Pause, Next, Previous, Repeat.
- FM Functions: Auto scan, Channel selection, Manual tuning.
- EQ: Equalizer presets.
- DISP: Display brightness/mode.
- SLEEP: Sleep timer function.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the speakers and subwoofer. Do not use liquid cleaners or abrasive materials.
- Ventilation: Ensure adequate ventilation around the subwoofer unit to prevent overheating. Do not block any ventilation openings.
- Environment: Avoid exposing the system to extreme temperatures, humidity, direct sunlight, or dusty environments.
- Power Off: When not in use for extended periods, switch off the main power on the rear panel and unplug the system from the wall outlet.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power switch off; Outlet not working | Check power cord connection; Turn power switch ON; Test outlet with another device |
| No sound | Incorrect input selected; Volume too low; Audio cables loose/incorrectly connected; Source device not playing | Select correct input; Increase volume; Check all audio cable connections; Ensure source device is playing audio |
| Bluetooth not pairing | System not in BT mode; Device too far; Device already paired to another system | Select BT input; Move device closer (within 10 meters); Disconnect from other devices and try again |
| Poor FM reception | Antenna not extended; Weak signal | Extend FM antenna fully; Reposition antenna for better signal |
| Remote control not working | Batteries dead/incorrectly inserted; Obstruction between remote and system | Replace batteries (2x AAA); Ensure correct polarity; Remove obstructions; Point remote directly at the subwoofer's sensor |
Specifications
| Feature | Specification |
|---|---|
| Model Name | BFS-5.1 Surround Sound Speaker System |
| Surround Sound Channel Configuration | 5.1 |
| Output Power | 30W Sub-woofer, 10W per speaker x 5 (80W total) |
| Frequency Response | 40Hz-20KHz |
| Separation | >50dB |
| Signal-to-Noise Ratio | 75 dB |
| Subwoofer Diameter | 5.25 Inches |
| Speaker Size (Satellites) | 3 Inches |
| Connectivity Technology | Bluetooth, USB, SD, FM Radio, AUX, DVD |
| Bluetooth Range | 10 Meters |
| Control Method | Remote |
| Material | Plastic, Metal |
| Item Weight | 15.45 Pounds |
| Product Dimensions | 11 x 23.5 x 21 inches (overall package) |
| Power Source | AC Power (Battery Powered for remote) |
Warranty and Support
This product comes with a limited warranty. For specific details regarding warranty coverage, please refer to the documentation included with your purchase or contact beFree Sound customer support.
For technical assistance or further inquiries, please visit the official beFree Sound website or contact their customer service department.
