Introduction
The Basic Fun Lite-Brite Stranger Things Special Edition Demogorgon Hunters set allows users to create illuminated art using a high-definition grid and mini pegs. This special edition features designs inspired by the popular Stranger Things series, offering an engaging and creative experience for fans aged 14 and up.
Key features of this Lite-Brite set include:
- A high-definition grid with 50% more holes than the Classic grid, enabling greater detail in designs.
- 16 HD design templates, featuring exclusive Demogorgon Hunter and Hellfire Club designs, along with other iconic monsters and symbols from the series.
- 900 mini-sized pegs in multiple colors for detailed artwork.
- Four color-changing light patterns: white light, alternating flash, all-flash, and rotating flash.
- A branded storage pouch for pegs and Stranger Things stickers to customize the unit frame.
What's in the Box
Your Lite-Brite Stranger Things Special Edition package contains the following items:
- Lite-Brite Unit
- 16 HD Design Templates
- 900 Mini Pegs (multiple colors)
- Branded Storage Pouch
- Stranger Things Stickers
Lite-Brite Stranger Things Special Edition set components, including the light board, templates, pegs, stickers, and storage pouch.
Setup Instructions
- Battery Installation: The Lite-Brite unit requires 3 x 1.5V AA/LR6 batteries (not included). Use a Phillips/cross head screwdriver (not included) to loosen the screws on the battery compartment cover, then remove the cover. Insert the batteries according to the polarity markings. Replace the cover and tighten the screws.
- Inserting a Template: Select one of the 16 HD design templates. Align the template with the pegs on the Lite-Brite grid and gently press it into place. The template should sit flat against the grid.
- Placing Pegs: Refer to the color codes on the template (e.g., Y for yellow, R for red, B for blue) and insert the corresponding mini pegs into the holes. Push each peg firmly until it is securely in place.
Hands actively placing mini pegs into the Lite-Brite grid to form a design.
Operating Instructions
- Power On/Off: Locate the power button on the back of the Lite-Brite unit. Press the button once to turn the unit on. Press it again to cycle through the light modes or hold it down to turn the unit off.
- Changing Light Modes: After turning on the unit, press the power button repeatedly to cycle through the four available light patterns:
- White Light (steady illumination)
- Alternating Flash
- All-Flash
- Rotating Flash
- Creating Designs: You can follow the provided templates by inserting pegs into the corresponding colored holes. Alternatively, use your imagination to create freehand designs directly on the grid.
Overview of the 16 high-definition design templates included with the Lite-Brite set.
Official product video showcasing the Lite-Brite Stranger Things Special Exclusive Edition, demonstrating its features and various designs.
Maintenance
- Cleaning: Wipe the Lite-Brite unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Peg Storage: Use the provided branded storage pouch to keep all mini pegs organized and prevent loss.
- Template Storage: Store templates flat to prevent bending or damage.
- Battery Care: Remove batteries if the unit will not be used for an extended period to prevent leakage.
Troubleshooting
- Lights Not Turning On:
- Ensure batteries are correctly installed with the correct polarity.
- Check if batteries are fresh and replace if necessary.
- Verify the power button is fully pressed.
- Pegs Not Lighting Up:
- Ensure pegs are fully inserted into the grid holes.
- Confirm the unit is powered on and a light mode is active.
Specifications
- Product Dimensions: 1.5 x 10.13 x 8 inches
- Item Weight: 1.41 pounds
- Item Model Number: 2298
- Manufacturer Recommended Age: 14 years and up
- Manufacturer: Basic Fun
Safety Information
WARNING: CHOKING HAZARD - Small Parts. Not for Children Under 3 years.
