Introduction
The VOKING VK750II TTL Camera Flash is designed to provide professional-looking illumination for your photography, especially in low-light conditions. This external flash unit is compatible with various Nikon camera models, offering versatile flash modes and advanced features to enhance your photographic experience.
Key features include:
- TTL, Manual (M), Multi, S1, and S2 flash modes for diverse shooting scenarios.
- Excellent dust and water resistance.
- Support for front and rear curtain synchronization.
- Vertical rotation angle of 0-90 degrees and horizontal rotation angle of 0-270 degrees.
- Fast recycling time and precise brightness control.
- Additional functions: FEC (Flash Exposure Compensation), AEB (Auto Exposure Bracketing), Manual Zoom, Auto Zoom, and PC Sync connection.
Package Contents
Upon unpacking, please ensure all the following items are present:
- 1 x VOKING VK750II Flash Unit
- 1 x Protective Pouch
- 1 x Mini Stand
- 1 x User Manual (this document)
- 1 x Product Card
Setup
1. Battery Installation
The VK750II flash unit requires 4 AA batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the side of the flash unit.
- Slide the battery compartment cover open.
- Insert 4 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Figure 1: Battery installation in the VK750II flash unit.
2. Mounting the Flash to Your Camera
To attach the flash to your Nikon camera's hot shoe:
- Ensure both the camera and flash are powered off.
- Slide the flash's mounting foot into the camera's hot shoe.
- Tighten the locking ring on the flash unit to secure it firmly to the hot shoe.
Figure 2: Hot shoe mount for attaching the flash to a camera.
Operating Modes
The VOKING VK750II offers several flash modes to suit various photographic needs:
- TTL (Through-The-Lens) Mode: The flash output is automatically controlled by the camera's metering system, providing optimal exposure. This is ideal for quick shooting and changing light conditions.
- Manual (M) Mode: Allows you to manually set the flash output power from full power to 1/128 power. This mode offers precise control for consistent lighting in controlled environments.
- Multi (Stroboscopic) Mode: Fires a series of rapid flashes during a single exposure, useful for capturing multiple movements of a subject in one frame.
- S1 (Optical Slave) Mode: The flash fires in response to the first flash from a master flash unit. This mode is suitable for use with manual or TTL master flashes that do not pre-flash.
- S2 (Pre-flash Cancel Slave) Mode: Similar to S1, but the flash ignores the pre-flash from a master TTL flash and fires on the main flash. This is useful when using a TTL flash as a master.
Figure 3: Display showing TTL mode and zoom settings.
Features and Functions
Flash Head Rotation
The flash head offers flexible rotation for bounce flash photography:
- Vertical Rotation: 0 to 90 degrees.
- Horizontal Rotation: 0 to 270 degrees.
This allows you to bounce light off ceilings or walls for softer, more natural illumination.
Figure 4: Flash head rotation angles.
Zoom Function
The flash features both manual and automatic zoom functions to match the flash coverage to your lens's focal length. This optimizes light distribution and efficiency.
Additional Functions
- FEC (Flash Exposure Compensation): Adjust the flash output level to fine-tune exposure.
- AEB (Auto Exposure Bracketing): Capture multiple shots at different exposure levels.
- PC Sync Port: For wired connection to cameras or studio strobes.
- LED Auxiliary Focus Light: Helps with focusing in low-light conditions.
Maintenance
To ensure the longevity and optimal performance of your VOKING VK750II flash unit, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the flash body. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use solvents or abrasive cleaners.
- Storage: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the flash or subjecting it to strong impacts. The flash tube is delicate and can be damaged by rough handling.
- Water Resistance: While the unit offers excellent water resistance, it is not fully waterproof. Avoid submerging it in water or exposing it to heavy rain.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. |
|
|
| Flash output is too weak/strong. |
|
|
| Flash does not sync with camera. |
|
|
Specifications
| Brand | VOKING |
| Model Name | VK750II |
| Compatible Mounts | Nikon |
| Compatible Devices | Nikon D50, D60, D80, D800, D750, D3300, D3400, D3500, D5300, D5200, D5100, D5000, D7200, D7100, D7000, D7500, D700, D600, D500, D90 |
| Flash Type | Slave |
| Guide Number | >50 |
| Flash Sync Speed | 1/200s or faster |
| Exposure Control Type | Automatic |
| Shooting Modes | TTL, M, Multi, S1, S2 |
| Vertical Rotation Angle | 0-90 degrees |
| Horizontal Rotation Angle | 0-270 degrees |
| Connectivity Technology | PC Connection |
| Wireless Technology | Optical Pulse |
| Water Resistance Level | Water Resistant |
| Power Source | 4x AA Batteries (not included) |
| Color | Daylight |
| Country of Origin | China |
Warranty and Support
The VOKING VK750II TTL Camera Flash comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any inquiries regarding your product, please contact VOKING customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.