LBW ca210901

LBW Dual-Head Full Spectrum LED Grow Light

Model: ca210901

Brand: LBW

1. Introduction

This instruction manual provides detailed guidance for the setup, operation, and maintenance of your LBW Dual-Head Full Spectrum LED Grow Light. Designed for indoor plants, this grow light features a flexible dual-head design, full spectrum LEDs, an auto on/off timer, 6 dimmable levels, 3 switch modes, and an adjustable tripod stand (15-63 inches) to support healthy plant growth across all stages.

LBW Dual-Head Grow Light illuminating various indoor plants

Image: The LBW Dual-Head Grow Light positioned to illuminate a collection of indoor plants, demonstrating its adjustable height and broad coverage.

2. Safety Instructions

  • Read all instructions carefully before operating the device.
  • This product is designed for indoor use only. Do not expose to water or high humidity.
  • Ensure the power supply matches the product's requirements (12 Volts).
  • Do not attempt to disassemble or modify the grow light. This may void the warranty and pose safety risks.
  • Unplug the device from the power outlet before cleaning or performing any maintenance.
  • Keep out of reach of children and pets.

3. Package Contents

Verify that all components listed below are included in your package:

Components included in the LBW Dual-Head Grow Light package
  • Adaptor (x1)
  • Dual Grow Light (x1)
  • Wrench (x1)
  • Nut (x2)
  • Connector (x1)
  • Gooseneck (x2)
  • Tripod (x1)

4. Setup Instructions

Follow these steps to assemble your LBW Dual-Head Grow Light:

Step-by-step assembly guide for the LBW Grow Light
  1. Assemble the Tripod: Open the tripod legs outwards and adjust the height to your desired level. Secure the height adjustment clamps.
  2. Attach Goosenecks and Connector: Install the connector onto the top of the tripod stand. Then, attach the two goosenecks to the connector.
  3. Mount the Light Panels: Securely fix the dual light panels to the ends of the goosenecks using the provided nuts and wrench.
  4. Connect to Power: Plug the adaptor into a standard electrical outlet.

The tripod stand is adjustable from 15 inches to 63 inches, allowing you to position the lights optimally for plants of various sizes.

Adjustable tripod stand for the LBW Grow Light, showing minimum and maximum heights

Image: Illustration of the adjustable tripod stand, highlighting its height range from 15 to 63 inches for versatile placement.

5. Operating Instructions

The LBW Grow Light features an intuitive control panel for easy operation:

Control panel with buttons for dimming, lighting modes, timer, and on/off

Image: Close-up of the inline control panel, showing buttons for brightness adjustment, mode selection, timer settings, and power.

5.1. Power On/Off

  • Press the Power Button (Power button icon) to turn the grow light on or off.

5.2. Adjusting Brightness (6 Dimmable Levels)

  • Use the Plus (+) and Minus (-) buttons (Plus button icon Minus button icon) to cycle through 6 different brightness levels (10%, 20%, 40%, 60%, 80%, 100%).

5.3. Selecting Lighting Modes (3 Switch Modes)

  • Press the Cycle Button (Cycle button icon) to switch between three lighting modes:
    • One light on (left or right)
    • The other light on (left or right)
    • Both lights on

5.4. Setting the Auto On/Off Timer

The timer function allows the light to automatically turn on and off daily:

  • Press the Timer Button (Timer button icon) to select a duration: 3 hours, 6 hours, or 12 hours.
  • Once a timer is set, the light will stay on for the selected duration, then turn off. It will automatically turn on again at the same time the next day for the same duration.
  • For example, if you set the timer to 6H at 9:00 AM, the light will turn off at 3:00 PM and turn on again at 9:00 AM the next day.
Diagram showing 3 lighting modes and 6 dimming levels for the grow light

Image: Visual representation of the three lighting modes (left light, right light, both lights) and six dimming levels (10% to 100%) in use.

6. Features

  • Dual-Head Design with Adjustable Tripod: The flexible dual-head design and adjustable tripod stand (15-63 inches) provide a larger illumination area, making it suitable for tall and large plants. The goosenecks allow for precise angle adjustment.
  • Full Spectrum LED: Equipped with 100 high-efficiency LEDs (12 Red + 60 Warm White + 28 Cold White), this grow light emits a full spectrum from 380nm to 800nm, mimicking natural sunlight to support all stages of indoor plant growth.
Diagram showing the full spectrum LED composition of the grow light

Image: Detailed breakdown of the LED types (Red, Warm White, Cold White) and their respective wavelengths, illustrating the full spectrum output.

7. Maintenance

  • Cleaning: Ensure the grow light is unplugged before cleaning. Wipe the light panels and stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ventilation: Ensure adequate airflow around the light panels to prevent overheating and maintain optimal performance.
  • Storage: When not in use for extended periods, store the grow light in a cool, dry place away from direct sunlight.

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.No power, loose connection, faulty adapter.Check if the power adapter is securely plugged into the outlet and the light. Ensure the outlet is functional. Try a different outlet.
Lights flicker or dim unexpectedly.Unstable power supply, loose connection, internal fault.Ensure stable power. Check all connections. If the issue persists, contact customer support.
Timer function is not working correctly.Incorrect timer setting, power interruption.Re-set the timer. Ensure the light is not unplugged after setting the timer.
Plants are not responding well to the light.Incorrect light intensity, duration, or distance.Adjust the dimming level and timer duration. Ensure the light is positioned at an appropriate distance from the plants. Consult plant-specific light requirements.

9. Specifications

SpecificationValue
BrandLBW
Model Numberca210901
Light Source TypeLED
Number of Light Sources100
Wattage20 watts
Voltage12 Volts
Brightness4500 Lumen
Efficiency22.5 lumens per watt
Special FeatureDimmable, Full Spectrum
Control MethodTouch
Indoor/Outdoor UsageIndoor
Adjustable Tripod Height15-63 inches
Item Weight2.5 Pounds
MaterialMetal
Lifespan50,000 hours

10. Warranty and Support

Your LBW Dual-Head Full Spectrum LED Grow Light comes with a 12-month servicing warranty. Additionally, we offer a 30-day satisfaction or return policy, ensuring 100% money back if you are not completely satisfied. For any issues or support needs, please contact our customer service team directly.

For further assistance, please visit the LBW Store on Amazon.

Related Documents - ca210901

Preview Zamel Systems of Heating Control: Smart Home Solutions
Explore Zamel's comprehensive range of heating control systems, including wireless, Wi-Fi, and wired solutions for smart home automation. Discover thermostats, controllers, sensors, and more for efficient and comfortable living.
Preview Air Cooler LBW-12000RC - Cleaning, Maintenance, and Operation Guide
Comprehensive guide for the Air Cooler LBW-12000RC, covering cleaning, maintenance, troubleshooting, operation, functions, and important safety precautions.
Preview Versaan Unity S1E PIR Sensor Installation Manual
Official installation manual for the Versaan Unity S1E PIR Ambient Light Sensor. Provides detailed instructions for installation, technical specifications, dimensions, wiring diagrams, and safety information for both recessed and surface mounting configurations.
Preview Hanukkah Lights Quilt Pattern | Fabric Requirements & Kit Chart | P&B Textiles
Discover the Hanukkah Lights Quilt pattern by Jetty Home, designed by Stacey Day. This page provides detailed fabric requirements and a comprehensive kit chart for P&B Textiles fabrics, essential for quilters.
Preview SAAB V22.80 Diagnostics List: Comprehensive Vehicle Module Functions
A detailed list of diagnostic functions available for SAAB vehicles with software version V22.80. Covers engine, chassis, and body modules, including specific functions like DTC reading/clearing, data stream, actuation, and special functions for various SAAB models and engine types.
Preview Perforated Steel Banding LBV/LBK: Fast Pipeline Fixing Solutions by fischer
Explore fischer's Perforated Steel Banding LBV/LBK, designed for rapid and secure pipeline installation. This document details applications, advantages, material properties, building material compatibility, installation guidance, and comprehensive technical specifications.