FABATO Wood TV Stand with Charging Station

1. Introduction

Thank you for choosing the FABATO Wood TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new TV stand. Please read these instructions carefully before beginning assembly and retain them for future reference.

This TV stand is designed to accommodate televisions up to 65 inches and features a built-in charging station with multiple outlets, along with ample storage space for media devices and accessories.

2. Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all parts are securely fastened before use. Do not overtighten screws.
• Do not exceed the maximum weight capacity of 200 lbs (90.7 kg) for the top surface.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• Place the TV stand on a level and stable surface to prevent tipping.
• Do not expose the charging station to moisture or liquids.
• If any parts are missing or damaged, do not attempt to assemble the product. Contact customer support immediately.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.

• Wooden Panels (Top, Bottom, Shelves, Side Panels)
• Metal Frame Components (Legs, X-shaped crossbars)
• Hardware Pack (Screws, dowels, connectors, adjustable feet)
• Power Strip with 4 AC Outlets and 6.5-foot (79-inch) Power Cord
• Assembly Tools (e.g., Allen wrench)
• Instruction Manual

4. Setup and Assembly

Assembly typically requires two adults. Follow the detailed steps provided in the included assembly guide. Tools for assembly are provided.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
2. Assemble Metal Frame: Attach the metal legs and X-shaped crossbars using the provided screws. Ensure all connections are secure but do not fully tighten until all frame components are in place.
3. Attach Wooden Panels: Secure the bottom and top wooden panels to the assembled metal frame.
4. Install Center Shelves: Insert the center shelves into the designated slots. The middle shelf is 3-height adjustable; choose the desired height before securing.
5. Install Power Strip: Mount the power strip in the designated area, typically on the back or inside a compartment, ensuring the power cord can reach an outlet.
6. Final Tightening: Once all components are in place, carefully tighten all screws.
7. Adjust Feet: The stand includes adjustable feet for stability on uneven floors. Rotate the feet to level the stand. Two extra feet are provided for additional support.

5. Operating Instructions

5.1 Placing Your Television

This TV stand is designed for televisions up to 65 inches. Ensure the television's base fits securely on the top surface and does not exceed the stand's dimensions (55 inches width). The maximum weight capacity for the top surface is 200 lbs (90.7 kg).

5.2 Using the Charging Station

The integrated power strip provides 4 standard AC outlets (120V / 12A) for powering your electronic devices. Plug the stand's power cord into a wall outlet. You can then plug your TV, DVD player, router, gaming consoles (e.g., Xbox One, PS4), and other devices into the outlets on the power strip.

5.3 Cable Management

Utilize the cable management holes located on the back of the center compartments to route and organize your device cables. This helps to keep your entertainment area tidy and reduces cable clutter. A dedicated slot for router antennas is also provided.

5.4 Storage Shelves

The TV stand features three spacious storage compartments. The middle shelf is 3-height adjustable, allowing you to customize the space for various media devices, books, or decorative items. The open design provides easy access to your components.

6. Maintenance

• Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the melamine coating.
• Spills: Immediately wipe up any spills to prevent water damage to the wooden panels.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.
• Heat: Do not place hot items directly on the surface without protection.

7. Troubleshooting

• Stand is wobbly:
  • Ensure all screws are fully tightened.
  • Adjust the leveling feet on the bottom of the stand to compensate for uneven floors.
• Power outlets not working:
  • Check if the stand's main power cord is securely plugged into a functional wall outlet.
  • Verify that the devices plugged into the power strip are turned on and functioning correctly.
  • Ensure the power strip itself is not overloaded.
• Difficulty during assembly:
  • Refer to the detailed assembly manual provided with the product.
  • Ensure you are using the correct hardware for each step.
  • Do not force parts together. If a part does not fit, recheck the instructions.

8. Specifications

9. Warranty and Support

FABATO is committed to providing 100% satisfactory service. If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer support team.

Please refer to your purchase documentation or the FABATO official website for specific warranty details and contact information. Keep your proof of purchase for warranty claims.

Common support inquiries include:

• Missing or damaged parts
• Assembly assistance
• Product defects
• General inquiries

We are dedicated to ensuring your satisfaction with FABATO products.