Product Overview
The TEC.BEAN H13 Replacement Filter is an authentic, multi-layer filtration system engineered to maintain the optimal performance of your TEC.BEAN JH50G-M Air Purifier.
Key Features
- Authentic Replacement: Officially made by TEC.BEAN, ensuring compatibility and performance with the JH50G-M air purifier.
- Preliminary Filter: Captures large airborne particles such as hair and pet fur.
- True HEPA Filter: Filters out over 99.97% of dust and other particles with a diameter greater than or equal to 0.3 micrometers.
- Activated Carbon Filter: Helps eliminate household odors and smoke from cooking, smoking, or pets.

Setup and Installation
Follow these steps to correctly install your new TEC.BEAN H13 Replacement Filter:
- Power Off: Ensure your TEC.BEAN JH50G-M Air Purifier is unplugged and turned off before beginning installation.
- Access Filter Compartment: Gently turn the air purifier upside down. Locate the bottom cover.
- Remove Old Filter: Rotate the bottom cover counter-clockwise to unlock and remove it. Carefully pull out the used filter.
- Insert New Filter: Remove the new H13 replacement filter from its packaging. Insert the new filter into the air purifier, ensuring it sits securely.
- Secure Bottom Cover: Place the bottom cover back onto the air purifier. Rotate it clockwise until it locks into place.
- Power On: Return the air purifier to its upright position and plug it back in.
Operating the Filter
Once installed, the filter operates automatically as part of your TEC.BEAN JH50G-M Air Purifier. Ensure the air purifier is powered on for continuous air purification.
Maintenance
To ensure optimal air purification and extend the lifespan of your air purifier, regular filter replacement is crucial.
- Replacement Frequency: It is recommended to replace the filter every 6 months if the air purifier is used approximately 8 hours daily. If usage is heavier or air quality is poor, replacement may be needed sooner.
- Filter Indicator: Refer to your TEC.BEAN JH50G-M Air Purifier's user manual for instructions on how to reset the filter replacement indicator after installing a new filter.
Troubleshooting
If you experience issues after replacing the filter, consider the following:
- Improper Installation: Ensure the filter is correctly seated and the bottom cover is securely locked. Refer to the "Setup and Installation" section.
- Filter Compatibility: Verify that you are using the authentic TEC.BEAN H13 Replacement Filter specifically designed for the JH50G-M model.
- Air Purifier Malfunction: If issues persist, consult the main user manual for your TEC.BEAN JH50G-M Air Purifier or contact TEC.BEAN customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | TEC.BEAN |
| Model | JH50G-M |
| Compatible Air Purifier | TEC.BEAN JH50G-M Air Purifier |
| Filter Type | H13 True HEPA, Activated Carbon, Preliminary Filter |
| MERV Rating | 13 |
| Material | Plastic |
| Item Weight | 10.2 ounces |
| Package Dimensions | 5.98 x 5.91 x 5.91 inches |
| Recommended Replacement | Every 6 months (8 hours daily use) |