1. Introduction
Thank you for choosing the PixelMan PMD2A-S Backup Camera. This high-definition rearview camera is designed to enhance your driving safety by providing a clear, wide-angle view of the area behind your vehicle. Featuring AHD 1080P resolution, a durable metal housing, and IP69 waterproof rating, it offers reliable performance in various conditions. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal use of your new backup camera.
Image: The PixelMan PMD2A-S backup camera, showing its compact design, included RCA cable, and mounting bracket.
2. Safety Information
Please read and understand all safety instructions before installing or operating the camera. Failure to follow these instructions may result in injury or damage to the product or vehicle.
- Professional Installation Recommended: If you are not familiar with vehicle electrical systems or installation procedures, seek professional assistance.
- Power Disconnection: Always disconnect the vehicle's battery before beginning any electrical work to prevent short circuits.
- Wiring: Ensure all wiring is properly insulated and secured to prevent pinching, abrasion, or exposure to water.
- Voltage Compatibility: This camera is designed for 12V vehicle systems. Do not connect to 24V systems without a proper voltage converter.
- Clear View: Ensure the camera's view is not obstructed by license plates, vehicle parts, or debris.
- Driving Safety: The backup camera is an aid and does not replace the driver's responsibility to check surroundings and mirrors before and during reversing.
3. What's in the Box
Verify that all components are present before beginning installation:
- PixelMan PMD2A-S Backup Camera (1x)
- Mounting Brackets (2x)
- Double-shielded RCA Cable (26 feet) (1x)
- Power Cable (1x)
- User Manual (1x)
- Installation Tools and Accessories (Screws, etc.)
Image: Visual representation of the PixelMan PMD2A-S backup camera and its included accessories, such as mounting brackets, cables, and user manual.
4. Product Overview and Features
The PixelMan PMD2A-S camera is engineered with advanced components for superior performance:
- 1080P AHD Resolution: Utilizes a high-quality chip for excellent image output, even in challenging light conditions.
- HD and AHD Switching: Supports both HD (720P) and AHD (1080P) signal output. Ensure your display supports AHD for 1080P resolution.
- 1/2.7in Large Photosensitive Chip: Enhances brightness, color saturation, and night vision compared to smaller chips, providing clearer and truer images.
- 170° Wide Angle Optical Glass HD Lens: Features a large aperture (F1.4) and fish-eye design for a broad field of view and optimal night vision performance.
- IP69 Lifetime Waterproof: Constructed with a sturdy alloy housing and Nano waterproof glue, ensuring durability and protection against water ingress in all weather conditions.
- Durable Metal Housing: Designed for longevity and resistance to temperature changes, preventing common issues like plastic housing expansion/contraction.
Image: Detailed view of the camera's unique metal housing, large aperture fisheye lens, and sturdy mounting points.
Image: Illustration demonstrating the superior image quality and night vision capabilities of the 1/2.7-inch large photosensitive chip compared to a standard 1/4-inch chip.
Image: Visual explanation of the camera's IP69 lifetime waterproof design, featuring nano waterproof glue sealing and robust metal housing.
5. Installation Guide
Follow these steps for proper installation of your PixelMan backup camera:
5.1 Wiring Diagram
The camera connects to your vehicle's display system via an RCA connector. The power cable connects to the vehicle's reverse light circuit for automatic activation when reversing.
Image: A clear wiring diagram illustrating how to connect the camera to your vehicle's head unit and power source, including the RCA video signal and power connections.
- Connect Video Cable: Connect the yellow RCA connector from the camera's video cable to the "Camera In" or "Reverse Camera" RCA input on your vehicle's display unit.
- Connect Power Cable:
- Connect the red wire of the camera's power cable to the positive (+) wire of your vehicle's reverse light.
- Connect the black wire of the camera's power cable to a reliable ground point on the vehicle chassis.
- The small red wire on the RCA cable should be connected to the reverse trigger wire of your head unit (if applicable) to automatically switch to the camera view when reversing.
- Cable Routing: Carefully route all cables, ensuring they are not pinched, exposed to excessive heat, or interfere with moving parts. Use zip ties to secure cables.
5.2 Mounting Options
The PixelMan PMD2A-S offers two mounting options using the included brackets:
- License Plate Mount: Use the license plate bracket to mount the camera above your license plate. This method often requires no drilling into the vehicle body, providing a hidden and clean installation.
- Surface Mount: Use the alternative bracket for surface mounting on any flat area at the rear of your vehicle, such as above the trunk lid or bumper. This may require drilling small pilot holes.
Image: Illustration of two installation methods, highlighting the "hidden installation" option where only the camera lens is visible, ensuring the license plate remains uncovered.
After mounting, adjust the camera angle to achieve the desired view. The sturdy bracket ensures stability.
6. Operating Instructions
Once installed, operating your PixelMan backup camera is straightforward:
- Automatic Activation: When your vehicle is shifted into reverse, the camera will automatically activate and display the rear view on your connected monitor.
- Guide Lines: The camera provides parking guide lines on the display to assist with parking and judging distance.
6.1 HD/AHD Signal Switching
The camera's default setting is HD (720P). If your monitor supports AHD (1080P) input, you can switch the camera's output to AHD for higher resolution. This is typically done by cutting a specific wire loop on the camera's cable (refer to the detailed diagram in the installation section or the included user manual for precise instructions on which wire to cut).
Image: Illustration detailing the wire-cutting options for display mode switching, including HD/AHD resolution, and guide line activation/deactivation.
6.2 Image Performance
The camera is designed to provide clear images in various lighting conditions:
- Bright Light: Automatic adjustment to balance exposure and prevent washout.
- Underground Car Parks: Optimized for low-light environments.
- Night Vision: Enhanced night vision capabilities allow for clear visibility even with minimal ambient light, such as your vehicle's reverse lights.
Image: Examples of the camera's performance in different lighting scenarios, including bright daylight, an underground parking garage, and nighttime, demonstrating its automatic adjustment and de-noising features.
7. Maintenance
To ensure the longevity and optimal performance of your PixelMan backup camera, follow these simple maintenance guidelines:
- Regular Cleaning: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Inspect Wiring: Occasionally check the wiring connections for any signs of wear, corrosion, or looseness. Ensure all cables are securely fastened.
- Housing Integrity: While the metal housing is highly durable and waterproof, avoid subjecting the camera to excessive physical impact.
- Winter Care: In snowy or icy conditions, gently clear any accumulation from the lens to maintain a clear view. Do not use sharp objects.
8. Troubleshooting
If you encounter issues with your PixelMan backup camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen |
|
|
| Fuzzy or distorted image |
|
|
| Guide lines not appearing/incorrect |
|
|
If the problem persists after trying these solutions, please contact Pixelman customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | PMD2A-S-brb |
| Video Capture Resolution | 1080p (AHD) / 720p (HD) |
| Real Angle of View | 170 Degrees |
| Optical Sensor Technology | CMOS |
| Lens Type | Wide Angle (F1.4 Aperture) |
| Waterproof Rating | IP69 |
| Voltage | 12.0V |
| Compatible Devices | Screen with RCA connector |
| Installation Type | Surface Mount |
| Product Dimensions | 7.87 x 3.54 x 1.97 inches |
| Item Weight | 11.3 ounces |
10. Warranty and Support
Pixelman is committed to providing high-quality products. This product comes with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pixelman website.
For technical support, troubleshooting assistance, or warranty claims, please contact Pixelman customer service through the contact information provided on the product packaging or the official website. Please have your model number (PMD2A-S-brb) and purchase details ready when contacting support.