Introduction
The XPCLEOYZ 192 DMX 512 Stage DJ Light Controller is designed to provide comprehensive control over DMX-compatible stage lighting fixtures. This controller allows users to manage up to 12 intelligent lights, each with up to 16 channels, and program up to 240 scenes across 30 banks. It is suitable for various applications including DJ setups, night clubs, family gatherings, weddings, and church events, offering versatile lighting control capabilities.
Figure 1: XPCLEOYZ 192 DMX 512 Stage DJ Light Controller overview.
Setup
Follow these steps to set up your DMX controller and connect your lighting fixtures:
- Power Connection: Connect the provided power adapter to the DC input port on the rear panel of the controller. Ensure the power switch is in the OFF position before connecting to a power outlet. The controller operates on AC100-130V, 50-60HZ.
- DMX Output Connection: Connect your DMX-compatible lighting fixtures to the 3-pin XLR DMX output interface on the rear panel of the controller using standard DMX cables. Ensure all connections are secure.
- Fixture Addressing: Set the DMX address for each of your lighting fixtures according to their respective manuals. Each fixture should have a unique starting address.
- Power On: Once all connections are made, switch the power button on the rear panel to the ON position. The LED display on the controller will illuminate.
Figure 2: Close-up view of the DMX output, DC input, and power switch on the rear panel.
Figure 3: Side view of the controller highlighting the DMX output and power input ports.
Operating Instructions
The 192 DMX 512 controller offers intuitive controls for managing your lighting effects. Familiarize yourself with the main control areas:
- Scanner Buttons (1-12): Select individual or groups of lighting fixtures.
- Scene Buttons (1-8): Recall pre-programmed scenes.
- Faders (1-16): Adjust the intensity or parameter values for selected DMX channels.
- Page Selector (Page A/B): Switch between pages of scenes or banks.
- Speed/Fade Time Faders: Adjust the speed and fade time of chases or scenes.
- LED Display: Shows current mode, scene number, or other relevant information.
Figure 4: Top view of the control panel with scanner buttons, scene buttons, and faders.
Programming Scenes
The controller can store up to 240 scenes, organized into 30 banks of 8 scenes each. Refer to the detailed programming section in the full user manual for specific steps on how to create, edit, and save your custom lighting scenes.
Voice Control Functionality
This controller supports voice control, allowing you to switch between different lighting scenes effortlessly using voice commands. This feature is particularly useful for dynamic performances where hands-free operation is desired. Consult the full manual for instructions on activating and utilizing voice control.
Connecting External Equipment
The 3-pin DMX cable can also be used to control other compatible equipment such as fog machines, oscillating beam lights, front lights, par lights, and strobe fixtures. Ensure the external equipment is DMX-compatible and correctly addressed.
Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC100-130V, 50-60HZ |
| Total Channel Number | 192 groups |
| Max Controlled Channels | 16 channels per fixture (up to 12 fixtures) |
| Max Procedure Steps | 40 steps |
| Scene Pause Time | 1-25.5 seconds/step |
| Scene Graduation Speed | 0.1-25.5 seconds |
| Display Monitor | LED |
| DMX Output Interface | 3-core XLR needle |
| Item Weight | 3.74 pounds |
| Package Dimensions | 20 x 7.3 x 4 inches |
| Material | Plastic |
Figure 5: Dimensional drawing of the XPCLEOYZ 192 DMX 512 Controller.
Maintenance
To ensure the longevity and optimal performance of your DMX controller, follow these maintenance guidelines:
- Cleaning: Regularly wipe the surface of the controller with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
- Storage: Store the controller in a cool, dry place away from direct sunlight, excessive heat, or moisture when not in use. Protect it from dust and physical impact.
- Cable Inspection: Periodically check all DMX and power cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent signal loss or electrical hazards.
- Environmental Conditions: Operate the controller within recommended temperature and humidity ranges to prevent malfunction.
Troubleshooting
If you encounter issues with your DMX controller, refer to the following common troubleshooting steps:
- No Power: Ensure the power adapter is securely connected to both the controller and a working power outlet. Verify the power switch on the rear panel is in the ON position.
- No DMX Signal to Lights: Check all DMX cable connections between the controller and your fixtures. Confirm that the DMX addresses on your fixtures are correctly set and do not overlap. Test with a known working DMX cable.
- Lights Behaving Erratically: This could indicate incorrect DMX addressing, faulty DMX cables, or interference. Double-check fixture addresses and cable integrity. Ensure no other DMX controllers are active on the same line.
- Buttons Unresponsive: If specific buttons or faders are not responding, ensure the controller is in the correct operating mode (e.g., Program, Playback). If the issue persists, power cycle the unit.
For persistent issues not resolved by these steps, please contact customer support.
Warranty and Support
The XPCLEOYZ 192 DMX 512 Stage DJ Light Controller comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures free return or exchange if the item is found to be defective under normal use.
For technical support, warranty claims, or any questions regarding the operation of your controller, please contact XPCLEOYZ customer service through the retailer where the product was purchased. Please have your purchase receipt and product model number (192DMX) available when contacting support.