1. Introduction
Thank you for choosing the SUITU Portable Cordless Handheld Vacuum Cleaner, Model ST-8001. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.
This vacuum cleaner is designed for both wet and dry cleaning tasks in various environments, including cars, homes, and offices. It features a powerful 10000Pa suction, a 120W motor, and a washable HEPA filter for effective cleaning.
2. Package Contents
Carefully unpack your SUITU Portable Cordless Handheld Vacuum Cleaner and check for the following items:
- SUITU Portable Cordless Handheld Vacuum Cleaner (Main Unit)
- Crevice Nozzle
- Brush Nozzle
- Wide Mouth Nozzle
- USB Charging Cable
- Washable HEPA Filter (pre-installed)
- Additional HEPA Filter (may vary by package)

3. Product Overview
Familiarize yourself with the main components of your vacuum cleaner:
- Main Body: Contains the motor, battery, and control buttons.
- Dust Collection Cup: Transparent container for collecting debris.
- HEPA Filter: Located inside the dust collection cup, filters fine particles.
- Power Button: Activates and deactivates the vacuum.
- Charging Port: USB port for charging the device.
- Nozzle Release Button: For detaching and attaching different nozzles.
4. Setup
4.1. Initial Charging
Before first use, fully charge the vacuum cleaner. Connect the provided USB charging cable to the vacuum's charging port and to a compatible USB power source (e.g., car USB port, wall adapter, power bank, laptop). The charging time is approximately 3.5 hours for a full charge, providing up to 60 minutes of continuous use.

4.2. Attaching Nozzles
Select the appropriate nozzle for your cleaning task. Align the nozzle with the vacuum's suction opening and push firmly until it clicks into place. To remove, press the nozzle release button and pull the nozzle off.
Video 1: This video demonstrates the assembly of the vacuum cleaner with its various attachments and shows its application in both dry and wet cleaning scenarios.
5. Operating Instructions
5.1. Powering On/Off
Press the power button located on the handle to turn the vacuum cleaner on. Press it again to turn the device off.
5.2. Dry Cleaning
For general dry debris like dust, crumbs, or pet hair, use the wide mouth nozzle for larger areas or the brush nozzle for upholstery and delicate surfaces. The crevice nozzle is ideal for tight spaces and corners.

5.3. Wet Cleaning
The vacuum cleaner is suitable for absorbing small amounts of liquid spills. Use the crevice nozzle for precise liquid pickup. Ensure the dust collection cup is not overfilled with liquid to prevent damage to the motor. After wet cleaning, empty and thoroughly dry the dust cup and filter.
5.4. Usage Scenarios
This versatile vacuum is designed for various cleaning tasks:
- Car Interior: Easily clean car seats, floor mats, dashboards, and hard-to-reach areas like cup holders and door pockets.
- Home: Ideal for quick clean-ups of spills, crumbs on tables, pet hair on furniture, or dust on shelves.
- Office: Keep your workspace tidy by vacuuming desks, keyboards, and office chairs.


6. Maintenance
6.1. Emptying the Dust Collection Cup
Regularly empty the dust collection cup to maintain optimal suction power. To empty, twist or press the release button on the dust cup to detach it from the main body. Dispose of the collected debris and reattach the cup securely.
6.2. Cleaning the HEPA Filter
The HEPA filter is washable and reusable. After detaching the dust cup, carefully remove the HEPA filter. Rinse it under running water until clean. Allow the filter to air dry completely before reinserting it into the dust cup. Do not use the vacuum with a wet filter. Replace the filter if it becomes damaged or excessively clogged.
6.3. General Care
Wipe the exterior of the vacuum cleaner with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Store the vacuum in a cool, dry place away from direct sunlight.
7. Troubleshooting
If you encounter any issues with your vacuum cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Does not turn on | Battery is depleted. | Charge the vacuum cleaner fully. |
| Low suction power | Dust collection cup is full. | Empty the dust collection cup. |
| Low suction power | HEPA filter is clogged. | Clean or replace the HEPA filter. |
| Low suction power | Nozzle or suction inlet is blocked. | Remove any obstructions from the nozzle or inlet. |
| Vacuum stops unexpectedly | Battery is low. | Recharge the vacuum cleaner. |
| Vacuum stops unexpectedly | Overheating due to prolonged use or blockage. | Turn off the vacuum, clear any blockages, and allow it to cool down before resuming use. |
8. Specifications
Key technical specifications for the SUITU Portable Cordless Handheld Vacuum Cleaner ST-8001:
- Brand: SUITU
- Model Name: ST-8001
- Power Source: Battery Powered
- Motor Power: 120W (0.161 horsepower)
- Suction Power: 10000Pa
- Filter Type: HEPA Filter
- Battery Life: Up to 60 minutes
- Charging Time: Approximately 3.5 hours
- Product Dimensions: 9.61"L x 2.83"W x 6.18"H
- Item Weight: 1.41 pounds
- Noise Level: 55 Decibels
- Control Method: Touch / Push Button
- Connectivity Technology: USB
- Color: Black

9. Warranty Information
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact customer support for specific details regarding warranty coverage and terms.
10. Customer Support
For any questions, technical assistance, or service requests, please contact SUITU customer support through the retailer where you purchased the product or visit the official SUITU website for contact information.





