NutriBullet Select 1000 Watt Blender Instruction Manual

Introduction

The NutriBullet Select 1000 Watt Blender is designed for efficient nutrient extraction and versatile blending. This manual provides essential information for safe and effective operation, maintenance, and care of your appliance.

Important Safety Information

Please read all instructions carefully before using the NutriBullet Select blender. Failure to follow these instructions may result in injury or damage to the appliance.

• Always unplug the blender from the power outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not immerse the motor base in water or any other liquid.
• Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.
• Blades are sharp. Handle with care.
• Ensure the cup and blade assembly are securely twisted onto the motor base before operation.
• Do not overfill the cups. Always ensure ingredients are below the MAX line.
• Never blend hot liquids in sealed cups as pressure buildup can cause the cup to burst.

What's Included

Your NutriBullet Select 1000 Watt Blender package includes the following components:

• 1000 Watt Motor Base
• Easy Twist Extractor Blade
• 32 oz (900ml) Pitcher
• 24 oz (700ml) Handled Travel Cup
• To-Go Lid
• Pitcher Lid with Cap
• Tamper
• Recipe Book

Image: The NutriBullet Select 1000 Watt Blender with its various components, including the motor base, 32 oz pitcher, and 24 oz handled travel cup.

Setup

Before first use, wash all parts except the motor base in warm, soapy water. Rinse thoroughly and dry. The motor base should only be wiped clean with a damp cloth.

1. Place the motor base on a clean, dry, and level surface. The motor base features suction cups on the bottom to ensure stability during operation.
2. Add your desired ingredients to the 32 oz pitcher or 24 oz handled travel cup. Do not exceed the MAX fill line.
3. Twist the Easy Twist Extractor Blade onto the cup until it is securely tightened.
4. Plug the power cord into a standard electrical outlet.

Operating Instructions

The NutriBullet Select offers versatile controls for various blending needs.

1. Place the assembled cup (with ingredients and blade attached) onto the motor base. Align the tabs on the cup with the slots on the motor base.
2. Twist the cup clockwise to lock it into place. The blender is now ready for operation.
3. Select your desired blending function using the control panel on the motor base:
• Low: For softer ingredients or lighter blends.
• High: For tougher ingredients, frozen fruits, or thicker blends.
• Pulse: For short bursts of power, ideal for chopping or controlling texture. Press and release the button for pulsing action.
• Extract: A pre-programmed cycle designed for optimal nutrient extraction.
4. Once blending is complete, twist the cup counter-clockwise to unlock it from the motor base.
5. Carefully remove the blade assembly from the cup by twisting it counter-clockwise.

Image: The NutriBullet Select 1000 Watt Blender with various fruits and vegetables in the pitcher, demonstrating its use for blending.

Maintenance and Cleaning

Proper cleaning ensures the longevity and hygiene of your NutriBullet blender.

• Cups and Lids: The cups and lids are dishwasher safe (top rack only). For manual cleaning, twist off the blade, rinse the cup and lid with soap and water.
• Extractor Blade: Rinse the extractor blade immediately after use. Use a brush to remove any stubborn residue. Ensure the blade is thoroughly dried after washing to prevent rust.
• Motor Base: Wipe the motor base clean with a damp cloth. Never immerse the motor base in water or any other liquid.

Troubleshooting

If you encounter issues with your NutriBullet Select blender, refer to the following common solutions:

• Blender Not Starting: Ensure the power cord is securely plugged into a working outlet and the cup is properly twisted and locked onto the motor base.
• Leaking: Check that the extractor blade is tightly screwed onto the cup and that the O-ring is correctly seated within the blade assembly. Do not overfill the cup beyond the MAX line.
• Motor Overheating: If the motor stops during operation, it may be due to overheating. Unplug the unit and allow it to cool down for 15-20 minutes before resuming use. Avoid continuous blending for extended periods.
• Inconsistent Blending: Ensure there is enough liquid in the cup to allow ingredients to circulate freely. If blending thick mixtures, use the Pulse function or add more liquid.

Specifications

Warranty and Support

The NutriBullet Select 1000 Watt Blender comes with a 1-year limited warranty. For warranty claims, technical support, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official NutriBullet website.