1. Introduction
This manual provides essential information for the safe and effective use of your Syslux LED Snowflake Projector Light. This device is designed to project dynamic snowflake patterns, creating a festive atmosphere for various occasions, both indoors and outdoors. Please read these instructions carefully before installation and operation.
2. Safety Information
- Ensure the power source matches the projector's requirements.
- Do not immerse the projector directly in water, despite its IP65 weather protection.
- Keep the projector away from open flames or extreme heat sources.
- Do not attempt to open or modify the projector. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the LED light source.
- Keep out of reach of children.
3. Package Contents
Verify that all components are present in the package:
- LED Snowflake Projector Light (2 units)
- Ground Stake (2 units)
- Round Base (2 units)
- Power Adapter with 32.8 ft (10m) Cable (2 units)
- Mounting Screws (for wall installation)
4. Product Features
- High Brightness LED: Projects clear and vivid snowflake patterns.
- Dynamic Snowfall Effect: Simulates falling snow with rotating large snowflakes.
- IP65 Weatherproof Rating: Suitable for both indoor and outdoor use, resistant to rain and humidity.
- Multiple Installation Options: Includes ground stake for yard/garden and a round base for flat surfaces or wall mounting.
- Adjustable Projection Angle: Projector head can be adjusted up to 270 degrees.
- 6-Hour Auto-Off Timer: Automatically shuts off after 6 hours of operation in daily circulation.
- Wide Application: Ideal for Christmas, holidays, parties, weddings, home, garden, and landscape decoration.
5. Setup
The projector offers flexible installation options:
5.1 Ground Stake Installation (Outdoor)
- Attach the ground stake to the bottom of the projector unit.
- Insert the stake firmly into the ground in your garden or yard.
- Adjust the projector head to the desired angle to direct the light.
5.2 Flat Surface Installation (Indoor/Outdoor)
- Attach the round base to the bottom of the projector unit.
- Place the projector on a stable, flat surface such as a floor, table, or deck.
- Adjust the projector head to the desired angle.
5.3 Wall Mounting (Indoor/Outdoor)
- Attach the round base to the bottom of the projector unit.
- Use appropriate screws (provided) to securely mount the base to a wall.
- Adjust the projector head to the desired angle.

Figure 1: Installation options for the projector, including placement on a flat surface and ground staking.

Figure 2: Optimal projection range and coverage area. For outdoor use, 20-33 ft is recommended, and for indoor use, 26-49 ft. Optimal projection coverage is 538-4300 sq ft.
6. Operating Instructions
- After installation, connect the power adapter to the projector and then plug it into a standard electrical outlet.
- The projector will automatically turn on and begin displaying the snowflake effect.
- The projector features a built-in 6-hour auto-off timer. It will operate for 6 hours and then automatically shut off, repeating this cycle daily.
- To manually turn off the projector, unplug it from the power source.

Figure 3: The projector includes a 6-hour auto-off timer for daily operation.
7. Maintenance
- Cleaning: Ensure the projector is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
- Lens Care: Gently clean the projection lens with a soft, lint-free cloth to maintain clear image quality.
- Storage: When not in use, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Inspection: Periodically check the power cable for any signs of damage. If damaged, discontinue use and replace the cable.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Projector does not turn on. | No power supply. | Check if the power adapter is securely plugged into the projector and the outlet. Ensure the outlet is functional. |
| Projection is dim or unclear. | Lens is dirty; Projector is too far from the surface. | Clean the projection lens. Move the projector closer to the projection surface (refer to Figure 2 for optimal distances). |
| Snowflake effect is not moving. | Internal motor malfunction. | Unplug and replug the projector. If the issue persists, contact customer support. |
| Projector turns off unexpectedly. | 6-hour auto-off timer activated. | This is normal operation. The projector will restart after 18 hours. If it turns off before 6 hours, contact customer support. |
9. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | Shenzhen Bolong Technology Co., Ltd. |
| Model Number | BL-DP-BFX |
| Package Dimensions | 18.8 x 16.4 x 11.2 cm |
| Item Weight | 827 grams (1.82 pounds) |
| Color | Black |
| Shape | Rectangular, Square |
| Material | Metal |
| Finish Type | Projector |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Style | Modern |
| Installation Type | Ground Mount |
| Weather Protection | IP65 |
| Operating Temperature | -4°F ~ 122°F (-20°C ~ 50°C) |
10. Warranty and Support
Your Syslux LED Snowflake Projector Light comes with the following:
- 30-Day Money-Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
- 12-Month Warranty: The product is covered by a 12-month warranty against manufacturing defects.
- Customer Support: For any questions, issues, or warranty claims, please contact our customer service. We aim to provide a 24-hour quick response and friendly support.