Product Overview
The Makita MR007GZ is a versatile job site radio designed for durability and high-quality audio performance in demanding environments. It supports multiple power sources and offers a range of connectivity options.
Key features include:
- Dual power source: Compatible with Makita 10.8V/12V Max CXT, 14.4V/18V LXT, 40V Max XGT batteries (not included) or AC power.
- DAB/DAB+ and FM radio reception.
- Bluetooth connectivity for wireless audio streaming.
- AUX-IN jack for wired audio devices.
- USB output port for charging mobile devices.
- Multi-amplifier system with mid-range, treble speakers, and a high-quality woofer.
- My Equaliser (MY EQ) mode for custom sound adjustment.
Figure 1: Front view of the Makita MR007GZ Job Site Radio, showcasing its robust design and control panel.
Setup
Powering the Radio
The MR007GZ can be powered by either an AC power adapter or compatible Makita batteries.
- AC Power: Connect the supplied AC power adapter to the DC IN jack on the radio and then plug it into a standard electrical outlet.
- Battery Power: Open the battery compartment cover. Insert a compatible Makita 10.8V/12V Max CXT, 14.4V/18V LXT, or 40V Max XGT battery into the battery slot until it clicks into place. Ensure the battery is fully charged for optimal performance. Close the battery compartment cover securely.
Note: The radio is not compatible with G-Series batteries. Batteries and charger are not included with the radio.
Figure 2: The Makita MR007GZ radio connected to its AC power adapter.
Figure 3: The battery compartment of the Makita MR007GZ radio, showing where to insert compatible batteries.
Operating Instructions
Turning On/Off
Press the Power button to turn the radio on or off.
Mode Selection
Press the 'BAND' button to cycle through available modes: DAB/DAB+, FM, Bluetooth, and AUX-IN.
Radio Operation (DAB/DAB+ and FM)
- Select DAB or FM mode using the 'BAND' button.
- For DAB/DAB+, the radio will automatically scan for available stations upon first use or if no stations are found. You can manually initiate a scan by navigating through the menu options.
- For FM, use the tuning knob or seek buttons to find stations.
- Adjust the volume using the main rotary knob.
- To save a preset station, press and hold one of the preset number buttons (1-5) until the display confirms the station is saved. To recall a preset, simply press the corresponding number button.
Bluetooth Connectivity
- Select Bluetooth mode using the 'BAND' button. The radio will enter pairing mode, indicated by a flashing Bluetooth icon on the display.
- On your mobile device, enable Bluetooth and search for available devices. Select 'MR007GZ' from the list.
- Once paired, the Bluetooth icon will become solid, and you can stream audio from your device to the radio.
AUX-IN and USB Port
- AUX-IN: Connect an external audio device (e.g., MP3 player) to the AUX-IN jack using a 3.5mm audio cable (not included). Select AUX-IN mode on the radio.
- USB Output: The USB port (5V/2.4A) is for charging external mobile devices only. It does not support audio playback from USB storage devices.
Figure 4: Close-up of the radio's display and control buttons, including the tuning knob and preset buttons.
Figure 5: Detailed view of the USB output port and AUX-IN jack on the Makita MR007GZ.
Maintenance
Cleaning
To maintain the radio's appearance and functionality, regularly wipe the exterior with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the surface.
Storage
When not in use for extended periods, store the radio in a dry, cool place away from direct sunlight and extreme temperatures. If using battery power, remove the battery before storage.
Handle Maintenance
Periodically check the bolts that secure the handle to ensure they are tight. If they become loose, re-tighten them to prevent issues during transport.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not turn on. | No power supply; battery depleted or not inserted correctly; AC adapter not connected. | Ensure AC adapter is securely plugged in or battery is charged and correctly inserted. |
| Poor radio reception. | Weak signal; antenna not extended; interference. | Extend the antenna fully. Reposition the radio to a location with better signal. Avoid placing near other electronic devices that may cause interference. Perform a new auto-scan for DAB/DAB+ stations. |
| Bluetooth device cannot pair. | Radio not in pairing mode; device too far; Bluetooth on device is off. | Ensure radio is in Bluetooth pairing mode. Move device closer to the radio. Check that Bluetooth is enabled on your device. |
| No sound from AUX-IN. | Cable not connected properly; incorrect mode selected; external device volume too low. | Check AUX cable connection. Ensure AUX-IN mode is selected on the radio. Increase volume on both the radio and the external device. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | MR007GZ |
| Product Dimensions | 25L x 16W x 43H centimetres (25 x 16 x 43 cm) |
| Weight | 5.3 kg |
| Power Source | Battery Powered (10.8V/12V Max CXT, 14.4V/18V LXT, 40V Max XGT) or AC Power Adapter |
| Tuner Technology | DAB+, DAB, FM |
| Frequency Range FM | 87.5 to 108 MHz |
| Frequency Range DAB/DAB+ | Band III 5A to 13F |
| Connectivity Technology | Bluetooth, USB (output only) |
| Special Feature | Wireless |
| Included Components | 1 x Makita MR007GZ, Power Adapter |
Figure 6: Dimensions of the Makita MR007GZ Job Site Radio.
Warranty and Support
Makita products are manufactured to high standards and undergo rigorous quality control. For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official Makita website. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may contact Makita customer service directly.
