Okin JLDQ.18.134.329Z02
Okin JLDQ.18.134.329Z02 Recliner Motor Actuator User Manual
Model: JLDQ.18.134.329Z02
Product Overview
The Okin JLDQ.18.134.329Z02 is a high-quality electric linear actuator designed for power recliners, lift chairs, and adjustable beds. This motor provides reliable push and pull force for smooth operation of your furniture.
Image: The Okin JLDQ.18.134.329Z02 motor actuator with its attached cables and connectors.
This motor is an original Okin JLDQ series part, suitable for replacing models JLDQ.18.134.329Z02, JLDQ.18.134.329Z03, JLDQ.18.134.329Z05, JLDQ.18.134.329Z06, JLDQ.18.134.329Z08, JLDQ.18.134.329D, and JLDQ.18.134.329Z. While minor differences may exist between these models, they do not affect general usage.
Specifications
| Feature | Detail |
|---|---|
| Model | JLDQ.18.134.329Z02 |
| Manufacturer | OKIN Refined Electric Technology Co.,Ltd |
| Load Capacity (Push/Pull) | 750 N (Newtons) |
| Stroke Length | 329 mm |
| Minimum Installation Dimension (Shrink) | 134 mm |
| Maximum Dimension (Extended) | 463 mm |
| Operation Frequency | On 1 min / Off 8 min |
| Appearance | Black (PA), Silver White (Aluminum) |
| Product Dimensions | 17.7 x 4 x 3 inches; 5 Pounds |
Image: Detailed view of the motor's label, showing model number JLDQ.18.134.329Z02 and other technical specifications.
Installation and Setup
This motor actuator set includes one motor and three distinct connectors for various functions. Ensure your furniture frame is compatible with the motor's minimum installation dimension, stroke, and plug types before proceeding.
Image: A close-up view of the three connectors: a 2-pin plug for power supply, a 2-pin socket for a slaved motor, and a 5-pin round plug with a clip for the hand control switch.
- Identify Connectors:
- The connector with a 5-pin round plug and clip is for the switch hand control.
- The connector with a 2-pin square plug is for the power supply.
- The connector with a 2-pin socket is for a slaved motor (if applicable).
- Remove Old Motor (if replacing): Carefully disconnect all wires and unbolt the old motor from the furniture frame. Note the orientation and connection points for reference.
- Position New Motor: Align the new Okin motor with the mounting points on your furniture frame.
- Secure Motor: Bolt the new motor securely into place. Ensure it is stable and does not wobble.
- Connect Wiring:
- Connect the 5-pin round plug to your recliner's hand control switch.
- Connect the 2-pin square plug to the power supply unit.
- If your furniture uses a slaved motor, connect it to the 2-pin socket.
- Test Functionality: Before fully reassembling your furniture, plug in the power supply and test the motor's operation using the hand control. Ensure smooth extension and retraction.
Image: An angled perspective of the Okin motor actuator, showcasing its compact design and integrated cable system.
Operating Instructions
The Okin JLDQ.18.134.329Z02 motor operates in conjunction with your recliner's hand control switch and power supply. Follow the instructions provided with your furniture for specific operation of the recline mechanism.
- Power Connection: Ensure the motor's power supply cable is securely connected to a compatible power source.
- Hand Control: Use the buttons on your recliner's hand control to extend or retract the motor, thereby adjusting the position of your furniture.
- Operation Cycle: Adhere to the recommended operation frequency of "On 1 minute / Off 8 minutes" to prevent overheating and ensure the longevity of the motor. Avoid continuous operation for extended periods.
Image: A graphic highlighting key product features, including its composition (1 motor, 3 connectors), appearance, stroke, and installation dimensions, emphasizing ease of installation and quiet operation.
Maintenance
The Okin JLDQ.18.134.329Z02 motor is designed for durability and requires minimal maintenance. Regular inspection can help ensure its continued smooth operation.
- Keep Clean: Periodically wipe down the motor and surrounding areas to prevent dust and debris buildup.
- Inspect Cables: Regularly check all cables and connectors for any signs of wear, fraying, or damage. Ensure connections are secure.
- Lubrication: The motor is pre-lubricated and generally does not require additional lubrication. If you notice unusual friction or noise, consult a qualified technician.
- Avoid Overloading: Do not exceed the specified load capacity of 750 N (push/pull force) to prevent damage to the motor.
Troubleshooting
If you encounter issues with your Okin JLDQ.18.134.329Z02 motor, follow these steps to diagnose and resolve common problems:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not operate. | No power, loose connection, faulty hand control, or faulty power supply. |
|
| Motor operates intermittently. | Loose connection, motor overheating, or intermittent fault in hand control/power supply. |
|
| Unusual noise during operation. | Obstruction, loose mounting, or internal motor issue. |
|
Note: Always troubleshoot the switch and power supply first before assuming the motor is faulty. Ensure the motor and plug match your recliner system.
Warranty and Support
For warranty information or technical support regarding your Okin JLDQ.18.134.329Z02 motor, please refer to the documentation provided with your original purchase or contact Okin customer service directly.
Manufacturer: OKIN Refined Electric Technology Co.,Ltd
For further assistance, you may visit the Okin Store on Amazon.
Related documentsJLDQ.18.134.329Z02
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.