Important Safety Information
Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.
- Weight Limit: Do not exceed the maximum weight capacity of 220 lbs (100 kg) per stool.
- Assembly: Ensure all parts are correctly assembled and fasteners are securely tightened before use. Improper assembly can lead to instability.
- Placement: Place stools on a flat, stable, and level surface. Avoid placing on uneven ground or against unstable surfaces to prevent tipping.
- Children: Supervise children around the stools to prevent climbing or misuse.
- Movement: Do not stand on the stools or use them as a ladder. Move stools by lifting, not dragging, to prevent damage to the product or flooring.
Product Overview
The Winsome Huxton Bar Stools are designed for versatile use in various home settings. This 2-piece set features a teak-finished seat and an oyster gray base, crafted from solid wood for durability and a streamlined appearance.
Image: Two Winsome Huxton bar stools, showcasing their design and finish.
Video: A 360-degree view of the Winsome Huxton 2-piece bar stools, demonstrating their full appearance and design from all angles.
Parts List
Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Round Seat (2)
- Legs (8)
- Crossbars (12)
- Hardware Pack (screws, washers, Allen wrench)
Assembly Instructions
Assembly is required for these bar stools. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts from the parts list are present.
- Attach Legs to Seat: For each stool, attach four legs to the underside of the round seat. Insert the screws through the pre-drilled holes in the seat and into the top of each leg. Hand-tighten screws only at this stage; do not fully tighten.
- Install Crossbars: Connect the crossbars between the legs. There are typically two sets of crossbars per stool (upper and lower). Align the holes and insert the screws. Again, hand-tighten only.
- Align and Tighten: Once all legs and crossbars are loosely assembled, gently place the stool upright on a flat surface. Apply slight downward pressure to ensure all components are properly seated and aligned. Then, systematically tighten all screws using the provided Allen wrench. Start with the screws connecting the legs to the seat, then the crossbars. Ensure all connections are firm and secure.
- Repeat for Second Stool: Follow the same steps to assemble the second bar stool.
Assembly Tip: It is recommended to only hand-tighten all screws initially. Once all components are in place and the stool is upright, then proceed to fully tighten all screws. This helps ensure proper alignment and stability.
Image: Assembled bar stools in a home environment, demonstrating their appearance after successful assembly.
Usage and Operation
These bar stools are designed for seating at counters, bars, or high tables. They can also serve as decorative stands for plants or lamps.
- Seating: Sit centrally on the stool. The crossbars serve as convenient footrests.
- Stability: Always ensure the stool is stable before applying full weight.
- Versatility: The compact footprint allows them to be tucked neatly under most counters or high tables.
Image: Bar stools positioned under a counter in a laundry room, illustrating practical usage.
Care and Maintenance
Proper care will help maintain the appearance and longevity of your bar stools.
- Cleaning: Wipe the stools with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Moisture: Protect the stools from excessive moisture and direct sunlight to prevent warping or fading.
- Tighten Fasteners: Periodically check and re-tighten all screws to ensure the stools remain stable and secure.
Troubleshooting
- Stool Wobbles After Assembly:
Ensure all screws are fully tightened. Loosen all screws slightly, gently press down on the seat on a flat surface to level the stool, then re-tighten all screws firmly.
- Difficulty Aligning Parts During Assembly:
Do not fully tighten any screws until all components are loosely assembled. This allows for minor adjustments and alignment before final tightening.
- Slippery Seat Surface:
The teak-finished seat may have a smooth surface. For added grip, consider using a non-slip cushion or pad (not included).
Product Specifications
Image: Technical diagram illustrating the dimensions and maximum weight capacity of the bar stool.
| Feature | Detail |
|---|---|
| Product Dimensions (each) | 13.39"D x 13.39"W x 29.37"H |
| Seat Diameter | 13.39" |
| Color | Teak/Oyster Gray |
| Brand | Winsome |
| Model Number | 36630 |
| Material | Solid Wood |
| Maximum Weight Recommendation | 220 Pounds (100 kg) |
| Number of Pieces | 2 |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
Warranty and Customer Support
Winsome Trading Inc. stands behind its products. If you receive a damaged or defective item, or require replacement parts, please contact the manufacturer directly within 60 days from the date of purchase.
For further assistance or inquiries, please refer to the contact information provided with your purchase or visit the official Winsome website.
You can also visit the Winsome Store on Amazon for more information and product offerings.
