Introduction
This manual provides detailed instructions for the Okin Wireless Remote Replacement Hand Control, model JLDK.18.01.22. This remote is specifically designed for use with electric adjustable beds that utilize the Okin control box JLDP.03.006.000. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
Safety Information
- Ensure the control box is compatible with this remote model (JLDP.03.006.000).
- Keep the remote control away from water and excessive moisture.
- Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.
- Use only AAA batteries. Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries according to local regulations.
Package Contents
- 1 x Okin Wireless Remote Control (Model: JLDK.18.01.22)
- Note: 3 AAA batteries are required and not included.
Product Overview
Front view of the Okin wireless remote control, displaying all function buttons including head and foot adjustments, flat position, massage, and timer settings.
Back view of the Okin wireless remote control with the battery compartment open, illustrating the placement for three AAA batteries.
The Okin wireless remote features a streamlined design with clearly labeled buttons for intuitive control of your adjustable bed. It includes dedicated buttons for head and foot adjustments, a flat position, massage functions, and a timer. The back of the remote houses the battery compartment.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover open.
- Insert 3 AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
2. Pairing Instructions (How to Match Code)
To ensure your remote control communicates correctly with your adjustable bed, it must be paired with the Okin control box JLDP.03.006.000. Follow these steps:
- Step 1: Power On. Plug in your adjustable bed to a power outlet. The power indicator light on the control box should illuminate.
- Step 2: Initiate Pairing. On the remote control, simultaneously press and hold the "up" arrow buttons for both HEAD and FOOT.
- Step 3: Observe Indicator Lights. The indicator lights on the remote control will begin to flash. Continue holding the buttons until the lights stop flashing.
- Step 4: Release Buttons. Once the lights stop flashing, release both buttons. The pairing process is complete.
For a visual guide on the pairing process, please refer to the image and video below:
Visual guide for pairing the Okin wireless remote control with the adjustable bed's control box.
Official video demonstrating the pairing process for the Okin Wireless Remote Control JLDK.18.01.22 with the adjustable bed system. This video shows how to connect the power, identify the control box, and perform the button sequence for successful pairing.
Operating Instructions
Once paired, your remote control is ready for use. The dual actuators allow independent control of the head and foot sections of your adjustable bed.
| Button | Function |
|---|---|
| HEAD Up/Down Arrows | Adjusts the head section of the bed upwards or downwards. |
| FOOT Up/Down Arrows | Adjusts the foot section of the bed upwards or downwards. |
| FLAT | Returns both the head and foot sections to a completely flat position. |
| MASSAGE (10min, 20min, 30min) | Activates the massage function for the selected duration (10, 20, or 30 minutes). |
| TIMER / ALL OFF | Cycles through massage timer settings or turns off all active functions, including massage. |
| Memory Positions (3 buttons) | Allows you to save and recall up to 3 preferred bed positions. Consult your bed's manual for saving positions. |
The remote control boasts a response time of less than 0.2 seconds and has been tested for over 160,000 clicks, ensuring reliable performance.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's indicator lights dim or it becomes unresponsive. Always replace all three AAA batteries at the same time.
- Storage: If storing the remote for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Solution |
|---|---|
| Remote not responding. |
|
| Remote indicator lights not flashing during pairing. |
|
| Bed functions are erratic or unresponsive after pairing. |
|
Specifications
- Model: JLDK.18.01.22
- Compatibility: Okin Control Box JLDP.03.006.000
- Power Source: 3 x AAA Batteries (not included)
- Response Time: Less than 0.2 seconds
- Durability: Tested for over 160,000 clicks
- Material: High-quality ABS with silicone buttons
- Dimensions: Approximately 15 x 4 x 1 inches
- Weight: Approximately 3.52 ounces
Warranty and Support
Okin is committed to providing high-quality products and excellent customer service. Your Okin Wireless Remote Control is designed for durability and reliable performance.
If you encounter any issues or have questions regarding your remote control, please do not hesitate to contact our customer support team. We aim to respond promptly and provide solutions within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official Okin website.
