ANZZI Don Series Frameless Sliding Tub Door

Product Overview

The ANZZI Don Series Frameless Sliding Tub Door is engineered for durability and modern aesthetics. Featuring 1/4" (6mm) thick, crystal clear tempered deco-glass with a Tsunami Guard protective coating, it resists water stains, soap scum, and limescale buildup. The door's hardware is RHINO ALLOY Certified, made from marine-grade aluminum alloy and zinc, ensuring high rust resistance and long-lasting performance. Its frameless design provides a clean, minimalist look, and the reversible installation allows for left or right-side opening to suit various bathroom layouts.

Image: The ANZZI Don Series Frameless Sliding Tub Door installed over a bathtub, showcasing its sleek design and matte black hardware.

Important Safety Information

• Always wear appropriate personal protective equipment (PPE) including safety glasses and gloves during installation.
• Ensure all components are securely fastened before use. Loose parts can cause injury or product damage.
• Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges.
• Do not attempt to install the product alone. Two or more people are required for safe handling and installation of glass panels.
• Verify wall structure can support the weight of the shower door. Consult a professional if unsure.
• Use only recommended tools and hardware.
• Keep children and pets away from the installation area.

Parts List

Before beginning installation, ensure all parts are present and undamaged. Refer to the detailed diagram in your physical manual for specific part identification.

• Tempered Glass Panels (Fixed and Sliding)
• Top Support Bar/Rail
• Wall Profiles/Brackets
• Sliding Rollers/Hangers
• Door Handle(s)
• Bottom Guide/Track
• Water Seals/Gaskets
• Mounting Hardware (Screws, Anchors, Washers)
• Installation Tools (Hex Keys, Wrenches)

Image: A diagram illustrating the overall dimensions of the tub door (60" W x 62" H) and highlighting features such as easy glide rollers and reversible installation.

Setup and Installation

Professional installation is recommended. If performing self-installation, ensure you have all necessary tools and follow these steps carefully. Always refer to the full installation guide provided with your product for detailed instructions and diagrams.

1. Prepare the Area: Ensure the tub/shower area is clean and dry. Measure and mark the installation points accurately on the wall.
2. Install Wall Profiles: Secure the vertical wall profiles to the wall using appropriate fasteners. Ensure they are plumb and level.


Image: Step-by-step diagram showing how to properly install the wall profiles for the tub door.

3. Install Top Support Bar: Attach the horizontal top support bar to the installed wall profiles. This bar provides the track for the sliding door.


Image: Diagram detailing the process of securing the top support bar to the wall profiles.

4. Install Fixed Glass Panel: Carefully place the fixed glass panel into its designated position within the wall profiles and secure it.
5. Install Sliding Glass Panel: Attach the rollers to the sliding glass panel and then hang the panel onto the top support bar.


Image: Visual guide for installing both the fixed and sliding glass panels into the frame.

6. Install Bottom Guide: Secure the bottom guide/track to the tub ledge or floor, ensuring it aligns with the sliding panel.
7. Install Handles: Attach the door handle(s) to the sliding glass panel.


Image: A close-up view of the matte black handle and the crystal clear glass finish of the tub door.

8. Apply Water Seals: Install the full-length water seals along the edges of the glass panels to prevent leaks.
9. Caulking: Apply a high-quality silicone sealant along all exterior seams where the frame meets the wall and tub. Allow adequate drying time before use.

Operating Instructions

The ANZZI Don Series tub door is designed for smooth and effortless operation.

• Opening/Closing: Gently grasp the handle and slide the door along the top rail. The easy glide rollers ensure a smooth motion.
• Water Retention: The Tsunami Guard dual-sided protective glass coating and anti-water seals are designed to keep water inside the tub area. Ensure the seals are clean and free of debris for optimal performance.
• Reversible Installation: The door can be installed to slide open from either the left or right side, depending on your preference and bathroom layout.

Care and Maintenance

Proper care will ensure the longevity and appearance of your ANZZI tub door.

• Glass Cleaning: For daily cleaning, wipe the glass with a soft cloth or squeegee after each use to prevent water spots. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can damage the Tsunami Guard coating.
• Hardware Cleaning: Clean the matte black hardware with a soft, damp cloth. Do not use abrasive cleaners, ammonia-based products, or scouring pads, as these can damage the finish.
• Seal Maintenance: Regularly inspect the water seals for any signs of wear or damage. Clean them periodically to remove soap residue and mildew. Replace seals if they become cracked or ineffective.
• Roller Maintenance: Keep the sliding rollers and track free of debris to ensure smooth operation. Occasionally, a silicone-based lubricant can be applied to the track for optimal glide.

Troubleshooting

Product Specifications

Warranty and Customer Support

For specific warranty details regarding your ANZZI Don Series Tub Door, please refer to the warranty card included with your product packaging or visit the official ANZZI website. ANZZI is committed to providing exceptional craftsmanship and customer satisfaction.

For technical assistance, replacement parts, or any other inquiries, please contact ANZZI Customer Support. Contact information can typically be found on the ANZZI website or within your product documentation.

You can also visit the ANZZI Store on Amazon for more information and support resources.