Product Overview
The CLAONER Solar Lights Outdoor are advanced solar-powered motion sensor lights designed to provide efficient and reliable illumination for various outdoor spaces. Featuring 128 high-quality LEDs, a 270° wide-angle illumination, and three distinct working modes, these lights enhance safety and visibility around your home. Their wireless and IP65 waterproof design ensures durability and ease of installation in diverse weather conditions.
Key Features:
- Upgraded Illumination: 128 LEDs with 270° wide-angle coverage for broader and brighter lighting.
- Motion Sensing: Enhanced PIR motion inductor detects movement up to 12-20 feet with a 120° angle.
- Energy Efficient: Solar panel absorbs sunlight for continuous illumination, operating by motion detection at night after 10 hours of daytime charging.
- Durable Design: Made of high-strength ABS material with IP65 waterproof rating, resistant to heat and frost.
- Multiple Modes: Offers 3 working modes: Normally On, Dim Light Sensor, and Intense Light Sensor for varied lighting needs.
Package Contents
Upon opening the package, verify that all components are present and in good condition:
- CLAONER Solar Motion Sensor Lights (6 units)
- Installing Screws (6 sets)
- Plastic Anchors (6 sets)
- Adhesive Tape (6 pieces)
- User Manual (1 copy)
Video 1: An overview of the CLAONER 128LED Solar Motion Sensor Lights, demonstrating their features and components.
Specifications
| Feature | Detail |
|---|---|
| Brand | CLAONER |
| Model Name | HSG-T18 |
| Item Model Number | CLCLSL013AB-USAS1 |
| Color | Cold White |
| Material | Plastic, Acrylonitrile Butadiene Styrene |
| Light Source Type | LED (128 count) |
| Power Source | Solar Powered |
| Special Features | 270° wide-angle illumination, Reflector LED bead, 120° detect angle, 3-way switching, IP65 waterproof |
| Water Resistance Level | Waterproof (IP65) |
| Product Dimensions | 4.4"L x 2.3"W x 4.2"H |
| Item Weight | 2.16 pounds (for 6-pack) |
| Installation Type | Wall Mount |
| Batteries Included | Yes |
| Warranty Type | 12 Month |
Setup & Installation
The CLAONER Solar Lights offer two convenient installation methods:
- Screw Mounting (Recommended):
For a secure and permanent installation, use the provided screws and plastic anchors. Mark the desired mounting location, drill a single hole, insert the anchor, and then secure the light with the screw.
- Adhesive Patch Mounting:
For a less permanent solution or on surfaces where drilling is not preferred, use the provided double-sided adhesive tape. Ensure the mounting surface is clean, dry, and smooth for optimal adhesion. Peel off the backing from the adhesive tape and firmly press the light onto the desired location.
Ensure the solar panel is positioned to receive direct sunlight for at least 8-10 hours daily to maximize charging efficiency.
Video 2: An introductory video for the CLAONER 128LED Solar Lights, including details on setup and initial use.
Operating Modes
The CLAONER Solar Lights feature a single button to cycle through three distinct lighting modes, allowing you to customize illumination based on your needs:
- Normally On Mode (Constant Light):
In this mode, the light stays on at a medium brightness throughout the night. Ideal for continuous ambient lighting.
- Dim Light Sensor Mode:
The light remains in a dim state. When motion is detected, it brightens to high intensity for approximately 20 seconds, then returns to dim if no further motion is detected. This mode balances energy saving with responsive illumination.
- Intense Light Sensor Mode (No Light to High Light):
The light remains off until motion is detected. Upon detection, it illuminates at high intensity for approximately 20 seconds, then turns off completely if no further motion is detected. This mode is optimized for security and maximum energy saving.
To switch between modes, simply press the small button located next to the motion sensor on the front of the light unit.
Maintenance
To ensure optimal performance and longevity of your CLAONER Solar Lights, follow these maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Optimal Placement: Periodically check that the lights are still positioned in an area that receives ample direct sunlight throughout the day. Trim any overhanging branches or obstructions that may block sunlight.
- Weather Resistance: The lights are IP65 waterproof, heat-resistant, and frost-resistant, designed to withstand various weather conditions. No need to bring them indoors during rain or cold weather.
- Battery Longevity: While the internal rechargeable battery is designed for long-term use, consistent full charging cycles will help maintain its capacity over time.
Troubleshooting
If your CLAONER Solar Lights are not functioning as expected, consider the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel receives 8-10 hours of direct sunlight daily. Clean the solar panel surface. |
| Light is dim or short-lived. | Partial charging or aging battery. | Relocate the light to a sunnier spot. Allow several days for full charge. If issue persists after extended use, battery may be degrading. |
| Motion sensor not detecting. | Obstruction or incorrect mode. | Ensure the motion sensor is clear of obstructions. Verify the light is set to a motion-sensing mode (Mode 2 or 3). |
| Light flickers or behaves erratically. | Low battery or environmental interference. | Allow the light to fully charge. Ensure no other strong light sources or reflective surfaces are interfering with the sensor. |
Warranty & Support
Your CLAONER Solar Lights are covered by a 12-month warranty from the date of purchase, as indicated in the product specifications. This warranty covers manufacturing defects and issues arising from normal use.
For technical support, warranty claims, or any inquiries regarding your product, please contact CLAONER customer service through the platform where you made your purchase or refer to the contact information provided in the included User Manual.
Please have your purchase details and model number (CLCLSL013AB-USAS1) ready when contacting support to facilitate a quicker resolution.
