ARCADE1UP Adjustable Height Stool (Joust) Instruction Manual

1. Introduction

The ARCADE1UP Adjustable Height Stool (Joust) is designed to provide a comfortable and themed seating solution for your Arcade1Up game cabinet. This officially licensed stool features iconic Joust artwork and is built for durability and user comfort during extended gaming sessions. Its adjustable height feature makes it versatile for various arcade setups.

Image: The ARCADE1UP Joust Adjustable Height Stool, showcasing its design and chrome legs.

2. Safety Information

Please read and understand all safety instructions before assembling or using the stool. Failure to follow these instructions may result in injury or damage to the product.

• Ensure the stool is used on a stable, level surface to prevent tipping.
• Do not overload the stool beyond its maximum weight capacity.
• Keep hands and fingers clear of moving parts during height adjustment.
• Periodically check all bolts and fasteners to ensure they are tight and secure.
• Keep away from open flames or excessive heat.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1 x Stool Seat (Joust themed)
• 1 x Set of Chrome Legs (Base)
• 4 x Leg Extenders (for taller height setting)
• 1 x Hardware Pack (screws, washers, Allen wrench)
• 1 x Instruction Sheet

4. Setup

Assembly Instructions

Assembly is straightforward and typically takes minimal time. Follow these steps:

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the chrome legs to the underside of the stool seat using the provided screws and Allen wrench. Ensure all screws are tightened securely.
3. For the 21.5-inch height setting, no leg extenders are needed.
4. For the 29.5-inch height setting, insert the four leg extenders into the bottom of each chrome leg. Ensure they click into place or are secured as per the specific hardware provided.

Image: Diagram illustrating the two adjustable height settings of the stool (21.5 inches and 29.5 inches).

5. Operating Instructions

The ARCADE1UP stool is designed for simple use. Once assembled to your desired height, it provides stable seating. To switch between heights, you will need to remove or attach the leg extenders as described in the assembly section. The stool does not swivel.

Image: Close-up of the Joust themed stool seat, highlighting the detailed artwork.

6. Maintenance

To ensure the longevity and appearance of your ARCADE1UP stool, follow these simple maintenance guidelines:

• Cleaning: Wipe the stool with a dry cloth to remove dust and light dirt. For more stubborn marks on the vinyl seat, use a damp cloth with mild soap and water, then dry thoroughly. Avoid abrasive cleaners or solvents.
• Chrome Care: The chrome legs can be cleaned with a soft, dry cloth. For smudges or fingerprints, a chrome cleaner can be used sparingly, followed by buffing to a shine.
• Regular Checks: Periodically inspect all connections and fasteners to ensure they remain tight. Re-tighten if necessary.

7. Troubleshooting

If you encounter any issues with your ARCADE1UP stool, consider the following common solutions:

• Stool feels wobbly: Ensure all assembly screws are fully tightened. Check that the stool is on a flat, level surface. If using leg extenders, ensure they are fully inserted and seated correctly.
• Difficulty adjusting height: Ensure no debris is obstructing the leg extender insertion points. Apply gentle, even pressure when inserting or removing extenders.
• Scratches on chrome: Minor scratches can sometimes be buffed out with a specialized chrome polish. For deeper scratches, professional repair may be required.

If problems persist, please refer to the Warranty and Support section.

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your ARCADE1UP Adjustable Height Stool, please contact ARCADE1UP directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.

Image: The official ARCADE1UP logo.