Introduction
This manual provides instructions for the installation and care of your SPIDERCASE protective case, designed specifically for the iPhone 12 and iPhone 12 Pro (6.1-inch models). This product offers robust protection against drops and includes two tempered glass screen protectors for comprehensive device safeguarding.
Image: The SPIDERCASE protective case for iPhone 12/12 Pro, shown with two included tempered glass screen protectors.
Package Contents
- 1 x SPIDERCASE Protective Case for iPhone 12/12 Pro
- 2 x Tempered Glass Screen Protectors
Image: A visual representation of the two tempered glass screen protectors included with the case, highlighting features such as triple strength, scratch resistance, smudge resistance, easy installation, bubble-free application, and shatter resistance.
Setup Instructions
1. Installing the Tempered Glass Screen Protector
- Ensure your iPhone screen is clean and free of dust or smudges. Use a microfiber cloth for best results.
- Carefully align the tempered glass screen protector with your iPhone screen, ensuring the cutouts for the speaker and sensors match.
- Gently place the screen protector onto the screen. It will adhere automatically.
- If any small bubbles remain, gently push them towards the edges of the screen using a soft cloth.
2. Installing the Protective Case
The SPIDERCASE features a 2-layer structure for enhanced protection:
- Inner Layer: Flexible rubber for shock absorption.
- Outer Layer: Hard polycarbonate for impact resistance.
Image: An exploded diagram illustrating the dual-layer design of the SPIDERCASE, consisting of a soft rubber interior and a hard outer cover, alongside the tempered glass screen protector.
- Separate the flexible rubber inner cover from the hard polycarbonate outer cover.
- Place your iPhone into the flexible rubber inner cover, ensuring all edges and corners are securely fitted.
- Align the rubber-covered iPhone with the hard polycarbonate outer cover and snap them together firmly until the case is fully assembled around your device.
Operating Instructions
Daily Use
- The case provides precise cutouts for all ports, buttons, sensors, and cameras, allowing full functionality without removal.
- The unique ergonomic design ensures buttons remain sensitive and easy to press.
- The skin-friendly frosted material offers a comfortable grip and helps prevent fingerprint marks from sweat.
Image: A person holding an iPhone 12/12 Pro equipped with the SPIDERCASE, illustrating the comfortable and secure grip provided by the case's design.
Wireless Charging
The SPIDERCASE is designed to be compatible with wireless charging. You do not need to remove the case to charge your iPhone wirelessly.
Image: A composite image highlighting the case's dual-layer protection, its compatibility with wireless charging, and its upgraded non-slip design.
Maintenance
Cleaning the Case
- To clean the case, remove it from your iPhone.
- Wipe the case with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used.
- Ensure the case is completely dry before re-installing it on your iPhone.
Cleaning the Screen Protector
- Use a microfiber cloth to gently wipe the screen protector.
- For smudges, a screen cleaner spray designed for electronics can be applied to the cloth (not directly to the screen).
Troubleshooting
Difficulty Removing the Case
The case is designed for a snug fit to ensure maximum protection. If you find it difficult to remove, gently pry open one corner of the hard outer shell, then carefully separate the rubber inner layer from your phone.
Screen Protector Bubbles
If bubbles appear after installation, try gently lifting the nearest edge of the screen protector and reapplying it, pushing the bubble out with a soft cloth as you lay it back down. Ensure the screen is dust-free before reapplication.
Specifications
- Compatible Devices: iPhone 12 (6.1 inch), iPhone 12 Pro (6.1 inch)
- Model Number: SP-BOX iP12 6.1
- Material: Polycarbonate, Rubber
- Color: Black
- Product Dimensions: 3.15 x 2.36 x 1.18 inches
- Item Weight: 4.6 ounces
- Special Features: Camera Protector, Military Grade Drop Protection (10 FT), Wireless Charging Compatible, Non-Slip Design
Image: A visual guide indicating that the case is designed exclusively for iPhone 12 and iPhone 12 Pro (6.1 inch models), and is not compatible with iPhone 12 Mini or iPhone 12 Pro Max.
Image: A graphic demonstrating the case's military-grade drop protection, indicating it withstands 3X more drops than military standard from a 10-foot height, with over 3200 drop tests resulting in 0% device damage.
Image: A detailed view of the case highlighting the 1.5mm raised edges around both the screen and camera, designed to protect against scratches and impacts.
Warranty and Support
While specific warranty details are not provided, SPIDERCASE is committed to customer satisfaction. If you encounter any issues with your product, please contact us directly. We aim to respond to all inquiries within 24 hours to provide assistance.
For support, please refer to the contact information provided with your purchase or visit the official SPIDERCASE store on Amazon.
Amazon Store Link: SPIDERCASE Store
