Introduction
Thank you for choosing the Yaheetech Adjustable Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image: Two red Yaheetech bar stools, showcasing their design and color.
Important Safety Information
⚠ WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
- Ensure all parts are present and undamaged before assembly.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 300 lb (136 kg) per stool.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Periodically check all connections and tighten as necessary.
Package Contents
Please verify that all components are included in your package before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Seat with backrest and armrests (2 units)
- Gas lift cylinder (2 units)
- Base plate (2 units)
- Footrest ring (2 units)
- Mounting plate for seat (2 units)
- Hardware pack (screws, washers, Allen wrench)
Assembly Instructions
Assembly is straightforward and typically requires only 8 screws per chair. Follow these steps carefully:
- Attach the Mounting Plate to the Seat: Align the mounting plate with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and Allen wrench. Ensure it is tightly fastened.
- Insert the Gas Lift into the Base: Place the large chrome base plate on a flat, stable surface. Insert the wider end of the gas lift cylinder into the central hole of the base plate.
- Attach the Footrest Ring: Slide the footrest ring over the top of the gas lift cylinder. Ensure it rests securely on the designated groove or support.
- Connect the Seat to the Gas Lift: Carefully place the assembled seat (with the mounting plate attached) onto the top of the gas lift cylinder. Press down firmly until it is securely seated.
- Test Stability: Once assembled, gently sit on the stool to ensure all connections are secure and the stool is stable.
Image: Detailed view of the armrests, gas lift, and footrest components.
Operating Instructions
- Height Adjustment: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at the desired height.
- Swivel Function: The seat features a 360° swivel mechanism, allowing for easy rotation without moving the base. Simply turn the seat to face any direction.
- Footrest: Utilize the built-in footrest for added comfort and support, especially when the stool is at a higher setting.
Image: User demonstrating the comfortable seating and swivel feature of the bar stool.
Maintenance and Care
Proper care will extend the life and appearance of your bar stools.
- Cleaning: Wipe the PU leather seat with a damp cloth. For tougher stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Chrome Parts: Clean chrome bases and armrests with a soft, dry cloth. For smudges, use a chrome cleaner as directed by the product manufacturer.
- Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack.
Image: Close-up of the water-resistant PU leather surface.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly | Loose screws or uneven floor. | Tighten all assembly screws. Ensure the stool is on a flat surface. Check the anti-slip ring on the base. |
| Height adjustment not working | Gas lift cylinder issue or lever mechanism obstruction. | Ensure the lever is fully engaged. Check for any obstructions around the gas lift. If the issue persists, the gas lift may need replacement. |
| Squeaking noise during swivel | Lack of lubrication in the swivel mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism under the seat. |
Product Specifications
Image: Detailed diagram illustrating the bar stool's dimensions and maximum weight capacity.
- Quantity: 2 stools per set
- Color: Red
- Materials: PU Leather, Foam, Plywood, Electroplated Steel
- Assembled Dimensions (D x W x H): 19.5" x 21" x (36.2"-44.5")
- Seat Width: 17"
- Seat Depth: 15"
- Adjustable Seat Height: 25"-33"
- Base Diameter: 16"
- Maximum Weight Capacity (per stool): 300 lb (136 kg)
- Item Weight: 36.2 pounds (for the set)
- Model Number: YT-00240522-001
- UPC: 850035103104
Warranty and Support
Yaheetech products are designed for quality and durability. For specific warranty details, please refer to the documentation included with your purchase or visit the official Yaheetech website. If you encounter any issues or require assistance, please contact Yaheetech customer support through their official channels or the retailer where the product was purchased.
For more information and support, visit the Yaheetech Store on Amazon.
