Introduction
Thank you for choosing Philips SHP2500 Over-Ear Wired Stereo Headphones. These headphones are designed to provide a comfortable listening experience with clear audio, suitable for various applications including podcasts, studio monitoring, recording, and general use with computers, keyboards, and guitars. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headphones.
Figure 1: Philips SHP2500 Over-Ear Wired Stereo Headphones.
Product Features
- 40mm Neodymium Drivers: Equipped with 40mm neodymium drivers for impactful bass and clear audio, ensuring you hear nuances in music.
- Convenient Design: Features built-in volume control for easy audio adjustment without needing to access the source device.
- Comfortable Wear: Special shape and luxurious ear cushions provide a perfect fit for maximum comfort, preventing audio leakage and enhancing bass performance.
- Extended Range: A 2-meter long cable offers ample freedom of movement, ideal for connecting to various audio equipment.
- Widely Compatible: Includes a standard 3.5mm jack and an additional 6.3mm (1/4") adapter for compatibility with smartphones, computers, tablets, and home audio systems.
- 90° Swivel Ear Cups: Allows for flexible positioning and comfortable fit.
Figure 2: Key features of the Philips SHP2500 headphones.
Package Contents
Your Philips SHP2500 headphones package should include the following items:
- Philips SHP2500 Over-Ear Wired Stereo Headphones
- Attached 2-meter audio cable with 3.5mm jack
- 6.3mm (1/4") adapter
- Ear Cushions (pre-installed)
Figure 3: Philips SHP2500 headphones with the included 6.3mm adapter.
Setup
- Identify the Audio Port: Locate the audio output port on your device (smartphone, computer, tablet, stereo receiver, keyboard, guitar amplifier, etc.). This will typically be a 3.5mm (1/8") or 6.3mm (1/4") jack.
- Connect the Headphones:
- If your device has a 3.5mm audio jack, plug the 3.5mm connector of the headphone cable directly into the device's audio output.
- If your device has a 6.3mm (1/4") audio jack, attach the included 6.3mm adapter to the 3.5mm connector of the headphone cable, then plug the adapter into the device's audio output.
Figure 4: The 6.3mm adapter for connecting to larger audio jacks.
- Adjust the Headband: Extend or retract the headband to fit comfortably over your head. The earcups should fully cover your ears.
- Position Earcups: The earcups can swivel 90 degrees to align perfectly with your ears, ensuring optimal sound and comfort.
Operating Instructions
- Power On/Off: These are passive wired headphones and do not require power. They are 'on' when connected to an audio source.
- Volume Control: Use the built-in volume control located on the headphone cable to adjust the audio level. You may also need to adjust the volume on your connected audio source.
- Wearing the Headphones: Place the headphones over your ears with the earcups fully enclosing them. Adjust the headband and swivel the earcups for a secure and comfortable fit.
Figure 5: User wearing Philips SHP2500 headphones during a recording session.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the headphones. For ear cushions, gently wipe with a damp cloth and mild soap if necessary, then dry thoroughly. Do not immerse the headphones in water.
- Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable.
- Cable Care: Do not pull on the cable to disconnect the headphones. Always grasp the plug firmly. Avoid sharp bends or kinks in the cable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume | Cable not fully connected; volume too low on headphones or source device; incorrect adapter used. | Ensure cable and adapter (if used) are securely plugged in. Increase volume on both headphones and the audio source. Verify the correct adapter (3.5mm or 6.3mm) is used for your device. |
| Distorted sound | Volume too high; damaged cable/connector; audio source issue. | Lower the volume on both headphones and the audio source. Check the cable and connectors for any visible damage. Test with a different audio source or device. |
| Uncomfortable fit | Headband or earcups not adjusted correctly. | Adjust the headband length and swivel the earcups to ensure they sit comfortably and fully cover your ears. |
Specifications
- Model: SHP2500
- Brand: Philips
- Connectivity Technology: Wired
- Headphones Jack: 3.5 mm Jack (with included 6.3 mm adapter)
- Noise Control: Sound Isolation
- Audio Driver Type: Dynamic Driver
- Audio Driver Size: 40 Millimeters
- Earpiece Shape: Over Ear
- Impedance: 32 Ohms
- Cable Length: 2 meters (approximately 6.5 feet)
- Control Type: Volume Control
- Item Weight: 13.7 ounces
- Color: Silver
Warranty and Support
Philips products are manufactured to the highest standards and undergo rigorous quality checks. This product is covered by a limited warranty against defects in materials and workmanship. For detailed warranty information, product registration, and technical support, please refer to the warranty card included in your package or visit the official Philips support website. Keep your proof of purchase for warranty claims.
Official Product Video
Video 1: Official overview of Philips Over Ear Wired Stereo Headphones, highlighting key features and design.