1. Introduction
Thank you for choosing the BLACK+DECKER Verve Designer Desk Lamp. This lamp combines modern design with advanced lighting technology, offering adjustable white light, 16 million RGB colors, and a convenient USB charging port. This manual provides essential information for the safe and efficient use of your new desk lamp.
Please read these instructions carefully before use and retain them for future reference.
2. Product Features
- Verve Designer Series: Features tilt-forward lightweight aluminum beams for focused illumination, a swivel base, and an adjustable lamp head with three touch-capacitive buttons.
- True White Lighting & Color Changing: Offers adjustable white light, single color, and color-changing mood lighting options.
- Adjustable White Color Tuning: Three adjustable color temperature modes for various activities: 3000K (relaxing), 4000K (reading), and 6000K (tasks). Includes stepless dimming levels and glare-free illumination.
- USB Port: Built-in 5V/1A USB port for convenient device charging.
- PureOptics LED Technology: Utilizes cost-efficient LEDs with a lifespan of up to 50,000 hours, consuming 85% less energy than incandescent lamps.
3. Package Contents
- BLACK+DECKER Verve Designer Desk Lamp
- Power Adapter / Charging Cable
4. Setup Instructions
- Unpack the Lamp: Carefully remove all components from the packaging. Ensure all parts listed in the 'Package Contents' section are present.
- Position the Lamp: Place the lamp on a stable, flat surface such as a desk, table, or nightstand. Ensure there is adequate space for adjustment.
- Connect Power: Insert the charging cable into the power input port on the lamp's base. Plug the other end of the power adapter into a standard electrical outlet.
5. Operating Instructions
5.1 Power On/Off
- Power Button: Lightly touch the power button (usually indicated by a circle or power symbol) on the lamp head to turn the lamp on or off.
5.2 Adjusting Brightness (Stepless Dimming)
- Dimming Control: With the lamp on, press and hold the power button or a dedicated dimming control button (if present) to adjust the brightness level. Release when the desired brightness is achieved.
5.3 Adjusting White Color Temperature
- Color Temperature Button: Touch the color temperature button (often indicated by a sun or color spectrum icon) to cycle through the three white light modes: 3000K (Warm White), 4000K (Natural White), and 6000K (Cool White).
5.4 Changing RGB Colors
- RGB Color Button: Touch the RGB color button (if available, often indicated by a rainbow icon) to activate the color-changing mode.
- Single Color Selection: In color-changing mode, touch the button again to pause on a specific color. Continue touching to cycle through other single colors.
5.5 USB Charging Port
- Device Charging: Connect your compatible device (e.g., smartphone, tablet) to the USB port located on the lamp's base using a USB cable. The lamp does not need to be on for the USB port to function, provided it is connected to power.
5.6 Adjusting the Lamp Arm and Head
- Arm Adjustment: The lamp features a flexible arm that can be adjusted to direct light as needed.
- Head Adjustment: The lamp head can also be tilted and swiveled to fine-tune the light direction.
6. Maintenance
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents, as they may damage the finish.
- LEDs: The LEDs in this lamp are designed for long-term use and are not user-replaceable.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. | Ensure the power adapter is securely plugged into the lamp and a working electrical outlet. |
| USB port is not charging devices. | Lamp not connected to power; faulty USB cable; device incompatibility. | Verify the lamp is plugged into a power source. Try a different USB cable. Ensure your device is compatible with 5V/1A charging. |
| Light flickers or is inconsistent. | Unstable power supply; internal issue. | Try plugging the lamp into a different outlet. If the problem persists, contact customer support. |
| Cannot change colors or dim. | Controls not responding. | Ensure your finger is making full contact with the touch-capacitive buttons. Disconnect and reconnect power to reset the lamp. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LED2100-USB |
| Product Dimensions | 15"D x 4.72"W x 17.32"H |
| Item Weight | 1.42 Kilograms |
| Light Source Type | LED |
| Wattage | 5.5 watts |
| Power Source | AC |
| Connectivity Technology | USB (5V/1A) |
| Control Method | Touch |
| Material Type | Aluminum |
| Color | Silver |
| Indoor/Outdoor Usage | Indoor |
9. Official Product Video
10. Warranty and Support
This BLACK+DECKER Verve Designer Desk Lamp comes with a 3-year limited warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact the manufacturer, Amax Inc., or refer to the contact information provided with your product packaging.
Please retain your proof of purchase for warranty validation.
