Coby Zooland Wired Plush Kids’ Headphones Instruction Manual

1. Introduction

Thank you for choosing the Coby Zooland Wired Plush Kids’ Headphones. These headphones are designed to provide a safe and enjoyable audio experience for children, featuring a volume limit, comfortable plush design, and a built-in audio splitter.

2. Safety Information

• Volume Limit: These headphones are designed with an 85dB volume limit to protect children's hearing. Do not attempt to bypass or modify this feature.
• Choking Hazard: Keep small parts, such as the 3.5mm jack, away from very young children to prevent choking.
• Supervision: Adult supervision is recommended during use, especially for younger children.
• Cleaning: Refer to the maintenance section for proper cleaning instructions.

3. Package Contents

Ensure all items are present in the package:

• Coby Zooland Wired Plush Kids’ Headphones (Unicorn Sparkle)
• Integrated 3.5mm audio cable with built-in splitter

Image: The Coby Zooland Unicorn Sparkle headphones, showing the plush earcups, rainbow headband, and the integrated 3.5mm audio cable with its built-in splitter for sharing audio.

4. Setup

4.1 Adjusting the Headband

1. Gently pull or push the earcups along the headband to adjust the size.
2. Ensure the earcups sit comfortably over the child's ears.

Image: A child wearing the Coby Zooland Unicorn Sparkle headphones, demonstrating a comfortable fit while using a laptop.

4.2 Connecting to an Audio Device

1. Locate the 3.5mm audio jack on your device (e.g., tablet, smartphone, computer).
2. Insert the 3.5mm plug from the headphones firmly into the device's audio jack.

Image: A close-up view of the 3.5mm audio jack, highlighting the built-in splitter feature.

5. Operating Instructions

5.1 Basic Audio Playback

• Once connected, play audio from your device. The sound will be routed through the headphones.
• Adjust the volume directly on your connected audio device. The headphones have a fixed maximum volume of 85dB for hearing protection.

5.2 Using the Built-in Splitter

The integrated 3.5mm splitter allows two users to listen to the same audio source simultaneously.

1. Connect the main 3.5mm plug of the Coby headphones to your audio device.
2. Plug a second pair of headphones (with a 3.5mm jack) into the splitter port located on the Coby headphone's cable.
3. Both headphones will now receive audio from the connected device.

Image: Two children lying down, each wearing headphones, with one pair connected to the Coby Zooland headphones via the built-in splitter, sharing audio from a tablet.

5.3 Using the Built-in Microphone

The headphones include a built-in microphone for communication during calls or online learning sessions.

• Ensure the 3.5mm jack is fully inserted into a compatible device that supports microphone input.
• The microphone will automatically activate when connected to a device that supports it.

6. Care and Maintenance

• Cleaning: Wipe the plush earcups and headband with a soft, damp cloth. Do not immerse the headphones in water. Avoid harsh cleaning agents.
• Storage: Store the headphones in a clean, dry place when not in use. Avoid extreme temperatures.
• Cable Care: Handle the audio cable gently. Avoid sharp bends or excessive pulling to prevent damage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the official Coby website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: Summit Electronics LLC