Introduction
This user manual provides essential information for the safe and effective operation of your QIRDLP Insulin Cooler Case. Designed for portability and precise temperature control, this device ensures your temperature-sensitive medications, such as insulin, interferon, and eye drops, are kept within the optimal range of 2-8°C (35-46°F) during travel, daily commutes, business trips, or at home.
Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Product Overview
Key Features:
- LED screen temperature touch control.
- Portable design with handle.
- Fast cooling: 0~8°C (32-46°F) in approximately 10-15 minutes.
- Multiple charging modes: 110V-240V adapter, USB cable, portable batteries, car/home/battery compatibility.
- Equipped with 2 portable rechargeable lithium-ion batteries (included).
- TSA Approved for travel.
- Built-in alarm for low power.
Setup
1. Battery Installation
The cooler comes with two rechargeable lithium-ion batteries. To install them:
- Locate the battery compartment on the bottom of the cooler.
- Pull down on the tabs to remove the panel.
- Connect the two sets of cables from the cooler to the corresponding ends of the blue batteries. Ensure a secure connection.
- Place the batteries into the compartment and reattach the panel.
2. Charging
Before first use, fully charge the batteries for 7 hours to ensure longer working time. The cooler supports multiple charging methods:
- Wall Outlet (AC 110V-240V): Use the provided wall adapter. Plug one end into the cooler and the other into a standard wall outlet.
- USB Charging: Use the provided USB cable. Plug one end into the cooler and the USB end into a USB port (e.g., car USB charger, mobile power bank, laptop, or plane USB charger).
Important: When recharging the blue batteries, ensure they are connected to the cooler first, and then plug the cooler into the power source.
3. Initial Power On
To power on the device, press and hold the power button (⏻) on the LCD touch screen for 3 seconds. The display will light up, showing the current temperature and battery status.
Operating Instructions
1. Temperature Control
The QIRDLP Insulin Cooler Case is designed to maintain temperatures between 2°C and 18°C (approximately 35°F to 65°F), with an optimal range for insulin being 2-8°C (35-46°F).
- Once powered on, the current internal temperature will be displayed on the LCD screen.
- To adjust the desired temperature, press the settings button (⚙). The temperature display will flash.
- Use the up (▲) and down (▼) arrow buttons to set your desired temperature.
- The device will automatically begin cooling or warming to reach and maintain the set temperature.
Note: The display shows temperature in Celsius. For long cooling times, setting the temperature at 8°C (46.4°F) is recommended.
2. Storage Capacity
The internal storage area is approximately 125mm (4.9 inches) deep and 235mm (9.3 inches) long. It can accommodate:
- 6-9 insulin pens
- 25 small medication bottles
- 60 medication refills
3. Usage Scenarios
The portable design and multiple power options make this cooler suitable for various environments:
- Travel: Ideal for use in cars (via USB), on high-speed trains, and airplanes (TSA approved, single lithium battery under 20000mAh).
- Home & Office: Provides a dedicated, temperature-controlled space for medications, avoiding bacterial cross-infection from shared refrigerators.
- Outdoor Activities: The carrying bag makes it convenient for picnics or other outdoor needs where temperature control is crucial.
4. Official Product Video
This official video from DLPFANDA demonstrates the QIRDLP cooler box, highlighting its handle and battery packs, and showing its operation and features.
Maintenance
- Cleaning: Regularly wipe the interior and exterior surfaces with a soft, damp cloth. Do not immerse the device in water.
- Ventilation: Ensure the ventilation slots are not covered during operation to prevent overheating.
- Battery Care: Fully charge batteries when not in use for extended periods to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not cooling/powering on. | Low battery or power connection issue. | Ensure batteries are fully charged and properly connected. Check power adapter and USB cable connections. |
| Temperature not reaching desired level. | Poor ventilation or high ambient temperature. | Ensure ventilation slots are clear. Avoid using in high-temperature environments or direct sunlight for extended periods. |
| Alarm sounding. | Low battery power. | Recharge the batteries immediately. |
If problems persist, please contact customer support.
Specifications
- Brand Name: QIRDLP
- Model Info: QIR001
- Item Weight: 5.13 pounds
- Product Dimensions: 4.17 x 1.57 x 7.08 inches
- Capacity: 46.18 Cubic Inches
- Installation Type: Countertop
- Special Features: Portable
- Defrost: Manual
- Door Material Type: Aluminum
- Batteries: 2 Lithium Ion batteries required (included)
- Temperature Range: Designed for 2-18°C (35-65°F)
Warranty and Support
The QIRDLP Insulin Cooler Case comes with a 1-year warranty. For any problems or inquiries, please contact our customer support team. We are committed to serving you wholeheartedly.