Introduction
Thank you for choosing the SACKit WOOFit Headphones u/ANC. This manual provides essential information for the safe and efficient use of your new headphones. Please read it thoroughly before operating the device and retain it for future reference.
Safety Instructions
- Do not expose the headphones to extreme temperatures, humidity, or corrosive environments.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not disassemble, repair, or modify the headphones yourself. Contact authorized service personnel for any repairs.
- Clean the headphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
- Keep the headphones away from children and pets.
Package Contents
Please check that all items are present in the package:
- SACKit WOOFit Headphones u/ANC
- USB Charging Cable
- 3.5mm Audio Cable (Detachable)
- Instruction Manual (this document)
Product Overview
Familiarize yourself with the components of your SACKit WOOFit Headphones.
Image: SACKit WOOFit Headphones u/ANC. This image displays the overall design of the headphones, highlighting the over-ear form factor and the earcups.
The SACKit WOOFit Headphones u/ANC feature an over-ear design with comfortable leather enclosure material. They offer both wired and wireless (Bluetooth) connectivity, a detachable 3.5mm audio jack, and touch controls for volume and other functions.
Setup
1. Charging the Headphones
Before first use, fully charge your headphones. Connect the USB charging cable to the charging port on the headphones and the other end to a USB power source (e.g., computer, wall adapter). The LED indicator will show charging status and turn off or change color when fully charged.
2. Power On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds until the LED indicator lights up.
- To Power Off: Press and hold the Power button for approximately 3 seconds until the LED indicator turns off.
3. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes rapidly (usually blue and red), indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "SACKit WOOFit" from the list of found devices.
- Once paired, the LED indicator will stop flashing and remain solid blue (or similar, refer to specific LED behavior in a full manual if available).
4. Wired Connection
To use the headphones with a wired connection, simply plug the detachable 3.5mm audio cable into the headphone's audio jack and the other end into your audio source's 3.5mm output. The headphones can be used passively in wired mode, even if the battery is depleted.
Operating the Headphones
1. Controls (Touch)
The WOOFit Headphones feature touch controls on the earcups. Specific gestures may vary, but common functions include:
- Play/Pause: Single tap on the touch area.
- Volume Up: Swipe up on the touch area.
- Volume Down: Swipe down on the touch area.
- Next Track: Swipe forward/right on the touch area.
- Previous Track: Swipe backward/left on the touch area.
- Activate ANC (Active Noise Cancellation): Dedicated button or specific touch gesture (refer to product-specific markings if available).
2. Making and Receiving Calls
- Answer Call: Single tap on the touch area when a call comes in.
- End Call: Single tap on the touch area during a call.
- Reject Call: Press and hold the touch area for approximately 2 seconds when a call comes in.
- Voice Assistant: Triple tap or press and hold a specific area (refer to product-specific instructions).
Maintenance
1. Cleaning
Wipe the headphones with a soft, dry, lint-free cloth. For the leather earcups, use a specialized leather cleaner if necessary, following the cleaner's instructions. Do not use abrasive cleaners, alcohol, or solvents.
2. Storage
When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. If provided, use the original carrying case to protect them from dust and scratches.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair via Bluetooth. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing LED). Turn on device Bluetooth. Move headphones closer to device (within 10 meters). |
| No sound. | Volume too low; incorrect audio source; headphones not connected. | Increase volume on headphones and device. Check audio source selection. Re-pair Bluetooth or re-connect 3.5mm cable. |
| ANC not working effectively. | ANC not activated; improper fit. | Ensure ANC is turned on. Adjust headphones for a snug fit over your ears. |
Specifications
- Model: SACKit WOOFit Headphones u/ANC (70010)
- Connectivity: Bluetooth, 3.5mm Audio Jack (Wired)
- Form Factor: Over Ear
- Control Type: Touch, Volume Control
- Frequency Range: 20 Hz - 20,000 Hz
- Enclosure Material: Leather
- Cable Features: Detachable 3.5mm Audio Cable
- Additional Features: Active Noise Cancellation (ANC), Lightweight design
Warranty and Support
SACKit products are covered by a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official SACKit website. For technical support, troubleshooting assistance, or service inquiries, please contact SACKit customer support through their official channels.
Please note: Keep your proof of purchase for warranty claims.