1. Important Safety Information
Read all instructions carefully before operating the ONNAIS Biometric Gun Safe. Failure to follow these instructions may result in injury, damage to the safe, or unauthorized access. Keep this manual for future reference.
- Always store firearms unloaded and separate from ammunition.
- Keep override keys in a secure location away from the safe and out of reach of children.
- Do not store the safe keys inside the safe.
- Ensure the safe is securely mounted to prevent unauthorized removal.
- Regularly check battery levels to ensure proper operation.
- This safe is designed to deter theft and provide quick access to authorized users. It is not fireproof or waterproof unless explicitly stated.
2. Package Contents
Verify that all items listed below are included in your package:
- ONNAIS Biometric Gun Safe
- Override Keys (2)
- Mounting Screws (for securing the safe)
- Steel Security Cable (for anchoring the safe)
- Barrel Safety Chamber Plug (for firearm safety)
- Silica Gel Dehumidifier (to help prevent moisture)
- Gun Cleaning Cloth
- User Manual (this document)
Image: Barrel Safety Chamber Plug. This plug is used to indicate an unloaded firearm for safety during storage or handling.
Image: Silica Gel Dehumidifier. Helps absorb moisture inside the safe to protect contents from rust and damage.
Image: Gun Cleaning Cloth. A soft cloth for maintaining the cleanliness of your firearm.
3. Setup
3.1 Battery Installation
The safe requires 4 AA batteries (not included) for operation. Locate the battery compartment, usually on the inside of the door or a removable panel. Insert the batteries, ensuring correct polarity.
3.2 Initial Access and Programming
Upon first use, open the safe using one of the override keys. Insert the key into the keyhole, turn it, and open the safe door. This will allow access to the interior for battery installation and programming.
3.3 Registering Fingerprints
- With the safe door open, locate the programming button (often inside the safe). Press it once.
- Place your finger firmly on the fingerprint sensor. The indicator light will flash.
- Lift and place your finger again, repeating this process several times from different angles until the safe confirms successful registration (e.g., a green light and beep).
- You can register up to 30 different fingerprints. Repeat the process for each desired fingerprint.
- Test the registered fingerprint with the door open before closing.
Image: Biometric Fingerprint Sensor. This sensor allows for quick access using registered fingerprints.
3.4 Setting a Passcode
- With the safe door open, press the programming button.
- Enter your desired 4-8 digit passcode on the keypad, then press the "OK" button.
- Re-enter the same passcode and press "OK" again to confirm.
- The safe will indicate successful programming (e.g., a green light and beep).
- Test the new passcode with the door open before closing.
Image: Electronic Keypad. Used for entering a numerical passcode to open the safe.
3.5 Mounting the Safe
The safe can be secured in two ways:
- Using Mounting Screws: For permanent installation, use the provided screws to fix the safe to a table, floor, or other sturdy surface. Pre-drilling pilot holes may be necessary.
- Using the Steel Security Cable: For portable security, loop the steel cable around a fixed object (e.g., car seat frame, furniture leg) and secure it to the safe's designated anchor point.
Image: The safe can be secured using mounting screws to a surface or anchored with a steel cable to a fixed object.
4. Operating Instructions
4.1 Opening with Fingerprint
Place a registered finger firmly on the fingerprint sensor. If recognized, the safe will unlock, and the door will open automatically or require a slight pull.
Image: A finger being placed on the biometric sensor for quick access.
4.2 Opening with Passcode
Enter your registered passcode on the keypad, then press the "OK" button. If the code is correct, the safe will unlock.
4.3 Opening with Override Key
In case of battery failure or forgotten codes, insert one of the override keys into the keyhole, turn it, and open the safe. This method bypasses the electronic lock.
Image: Two override keys provided for manual access to the safe.
4.4 Silent Mode
Some models feature a silent mode. Consult your specific model's instructions or look for a dedicated button/sequence to enable/disable sound feedback during operation.
Image: An icon indicating a silent mode feature, allowing discreet operation without sound.
5. Maintenance
5.1 Battery Replacement
When the battery power is low, the safe will typically indicate this with a warning light or sound. Replace all 4 AA batteries promptly to ensure continuous operation. Use only new, high-quality alkaline batteries.
5.2 Cleaning
Wipe the exterior of the safe with a soft, damp cloth. Do not use abrasive cleaners or solvents. For the interior, use the provided gun cleaning cloth to keep surfaces free of dust and debris.
5.3 Moisture Control
Place the silica gel dehumidifier inside the safe to absorb moisture and prevent rust on stored items. Replace or reactivate the dehumidifier as needed according to its instructions.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with fingerprint. | Finger not placed correctly; unregistered fingerprint; low battery; sensor dirty. | Ensure finger covers the sensor completely; re-register fingerprint; replace batteries; clean sensor with a soft cloth. |
| Safe does not open with passcode. | Incorrect passcode entered; low battery; keypad buttons stuck. | Verify passcode and re-enter; replace batteries; check for stuck buttons and gently free them. |
| No power/lights. | Dead or incorrectly installed batteries. | Replace all batteries with new ones, ensuring correct polarity. Use override key for access if needed. |
| Safe makes unexpected sounds or alarms. | Tampering attempt; low battery warning. | Check for signs of tampering; replace batteries. |
7. Specifications
- Brand: ONNAIS
- Model: B09D7FKDQ3
- Product Dimensions: 0.12"D x 0.36"W x 4"H
- Lock Type: Biometric (Fingerprint), Keypad, Key
- Color: Black
- Material: Alloy Steel
- Special Features: Fingerprint Sensor, Portable
- Mounting Type: Freestanding, Tabletop (with screws or cable)
- Alarm: Anti-theft
- Water Resistance Level: Not Water Resistant
- Chamber Width: 6.69 Inches
- Power: 4x AA Batteries (not included)
8. Warranty and Support
For warranty information or technical support, please contact ONNAIS customer service. Refer to the product packaging or the official ONNAIS website for the most current contact details.
Website: www.onnais.com (Example, actual URL may vary)
Email: support@onnais.com (Example, actual email may vary)
Please have your model number (B09D7FKDQ3) and purchase date ready when contacting support.