Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Yealink YHS34 LITE DUAL Wideband Headset. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Image: The Yealink YHS34 LITE DUAL Wideband Headset, showing its over-the-head design with two earcups and an adjustable microphone boom arm.
Setup
Connecting the Headset
The Yealink YHS34 LITE DUAL headset is designed for plug-and-play connectivity with compatible Yealink IP phones using its QD (Quick Disconnect) to RJ9 cable.
- Connect the QD end of the cable to the headset.
- Connect the RJ9 end of the cable to the headset port on your Yealink IP phone.
- The phone will automatically optimize acoustic parameters for the headset.
Image: The Yealink YHS34 LITE DUAL headset displayed alongside its QD to RJ9 connection cable, illustrating the plug-and-play setup.
Compatible Yealink IP Phones
This headset is compatible with the following Yealink IP phone models:
- T19(P) E2, T21(P) E2, T23P, T23G, T27G, T29G
- T30, T30P, T31, T31P, T31G, T33P, T33G
- T40P, T40G, T41S, T42S, T46S, T48S
- T42U, T43U, T46U, T48U
- T53, T53W, T54W, T57W, T58A, VP59
- T41S SFB, T42S SFB, T46S SFB, T48S SFB
- T55A SFB, T56A SFB, T58A SFB, MP56
Operating Instructions
Wearing the Headset
Position the headset comfortably over your head. The ear cushions are designed for extended wear. Adjust the headband for a secure yet comfortable fit.
Image: A close-up view of the soft ear cushions on the Yealink YHS34 LITE DUAL headset, highlighting their design for comfort during long periods of use.
Microphone Adjustment
The microphone features a 330° bendable boom arm. Position the microphone approximately 2-3 cm (1 inch) from your mouth for optimal voice pickup. The noise-canceling microphone helps reduce background noise for clearer conversations.
Audio Quality
The headset provides HD Voice/Wideband speaker performance. Its independent cavity design and passive noise cancellation contribute to a richer and clearer audio experience by minimizing ambient distractions.
Volume Control
Volume adjustments are typically managed directly from your connected Yealink IP phone or through the phone's interface. Refer to your specific IP phone's manual for detailed volume control instructions.
Maintenance
Cleaning
- Use a soft, dry cloth to clean the headset.
- For ear cushions, gently wipe with a slightly damp cloth and allow to air dry completely before use.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
Storage
When not in use, store the headset in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cables to prevent damage.
Troubleshooting
No Sound from Headset
- Ensure the QD to RJ9 cable is securely connected to both the headset and the IP phone.
- Check the volume settings on your IP phone.
- Verify that the headset is selected as the audio output device on your IP phone, if applicable.
Microphone Not Working
- Confirm the microphone boom arm is positioned correctly near your mouth.
- Check if the microphone is muted on your IP phone.
- Ensure all cable connections are secure.
Poor Audio Quality
- Ensure the headset is properly connected.
- Adjust the microphone position to reduce background noise.
- Check for any physical damage to the cables or headset.
Specifications
| Brand | Yealink |
| Model Number | YHS34 LITE DUAL |
| Color | Black |
| Ear Placement | On Ear |
| Form Factor | Over-Ear (Dual Earcup) |
| Impedance | 32 Ohms |
| Connectivity Technology | Wired (RJ9) |
| Microphone Type | Uni-Directional ECM, Noise-Canceling |
| Microphone Frequency Response | 100 Hz - 8 kHz (Wideband) |
| Microphone Sensitivity | -44.0 dB re. 1 V/Pa |
| Speaker Size | 28mm |
| Speaker Sensitivity | 93 dB SPL @ 1 kHz |
| Speaker Frequency Response | 20 Hz - 20 kHz (Wideband) |
| Speaker Input Power | Max 10 mW |
| Headset Cable Length | 0.9m |
| QD to RJ9 Cable Length | 1.2m |
| Storage Temperature | -30 °C to +70 °C |
| Operating Temperature | -10 °C to +50 °C |
| Weight | 160 Grams |
| Materials | Foam, Leather (Ear Cushions) |
Warranty Information
For detailed warranty information regarding your Yealink YHS34 LITE DUAL headset, please refer to the warranty card included with your product or visit the official Yealink website. Warranty terms and conditions may vary by region and retailer.
Support
If you require further assistance or have questions not covered in this manual, please contact Yealink customer support or visit the official Yealink support website for FAQs, drivers, and additional resources.
Official Yealink Website: www.yealink.com