1. Introduction
The Sonance MAG Series 6.1 Outdoor Streaming Sound System is designed to provide high-fidelity audio in outdoor environments. This system integrates seamlessly into your landscape, offering balanced sound coverage across a wide area. This manual provides essential information for the proper setup, operation, and maintenance of your sound system.
1.1 What's in the Box
- 6 x Satellite Speakers
- 1 x In-Ground Subwoofer
Important Note: An external amplifier is REQUIRED for the operation of this system and is NOT included in this package. Please ensure you have a compatible amplifier before proceeding with installation.
2. Safety Information
- Read all instructions before installation and use.
- Ensure all wiring is correctly connected to prevent damage to the system or amplifier.
- Do not expose the system to extreme temperatures or direct water submersion, as it is not waterproof.
- Disconnect power before performing any maintenance or making connections.
- Consult a qualified professional for complex installations or if you are unsure about any steps.
3. Setup
3.1 System Components Overview
This image displays the complete Sonance MAG Series 6.1 Outdoor Streaming Sound System. It features a dark, dome-shaped subwoofer designed for in-ground installation, surrounded by six dark, stake-mounted satellite speakers. The satellite speakers are designed to blend into outdoor landscaping while providing wide sound dispersion.
3.2 Placement Guidelines
- Subwoofer Placement: The in-ground subwoofer should be placed in a central location within your desired listening area to ensure even bass distribution. Bury the subwoofer with only the dome exposed above ground.
- Satellite Speaker Placement: Distribute the six satellite speakers evenly around the listening area. For optimal sound, place them approximately 10-15 feet apart and at a height that allows sound to project clearly.
- Cable Routing: Plan your cable routes carefully to ensure they are buried safely and are protected from damage. Use direct burial speaker wire.
3.3 Wiring and Connections
- Prepare Wires: Strip approximately 0.5 inches of insulation from the ends of your speaker wires.
- Connect Satellite Speakers: Connect each satellite speaker to the appropriate speaker output terminals on your external amplifier. Ensure correct polarity (+ to + and - to -).
- Connect Subwoofer: Connect the subwoofer to the dedicated subwoofer output or a bridged channel on your external amplifier, following the amplifier's instructions for subwoofer connection.
- Power Amplifier: Once all speaker and subwoofer connections are secure, connect your amplifier to a power source.
4. Operating Instructions
4.1 Powering On/Off
To power on the system, turn on your connected external amplifier. The system will become active once the amplifier is powered. To power off, simply turn off the amplifier.
4.2 Connecting Audio Sources
- Wi-Fi Connectivity: If your amplifier supports Wi-Fi streaming, follow its instructions to connect to your home network and stream audio.
- Bluetooth Connectivity: If your amplifier supports Bluetooth, enable Bluetooth on your smartphone, tablet, or other compatible device. Pair with the amplifier as per its instructions.
- Wired Connections: Connect devices like MP3 players, televisions, or other audio sources directly to your amplifier's input ports using appropriate audio cables.
4.3 Using the Remote Control
The system's control is primarily managed through the remote control provided with your external amplifier. Refer to your amplifier's manual for detailed instructions on adjusting volume, changing inputs, and other functions.
5. Maintenance
- Cleaning: Gently wipe the exposed surfaces of the speakers and subwoofer with a damp cloth to remove dirt or debris. Avoid using harsh chemicals or abrasive cleaners.
- Environmental Care: While designed for outdoor use, avoid prolonged exposure to standing water or extreme weather conditions. Ensure proper drainage around the subwoofer.
- Cable Inspection: Periodically inspect buried cables for any signs of damage or exposure. Repair or replace damaged cables promptly to maintain system performance and safety.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers/subwoofer | Amplifier not powered on; Incorrect wiring; No audio source connected; Amplifier not compatible or missing. | Ensure amplifier is on and functioning. Check all speaker wire connections for correct polarity and secure fit. Verify an audio source is playing. Confirm you have a compatible external amplifier connected. |
| Distorted sound | Volume too high; Damaged speaker wire; Amplifier clipping. | Reduce volume. Inspect speaker wires for damage. Consult amplifier manual for gain staging. |
| Intermittent sound | Loose connections; Damaged cable; Source device issues. | Check all connections at the amplifier and speakers. Inspect cables for breaks. Test with a different audio source. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | MAG Series |
| Speaker Type | Subwoofer, Satellite, Outdoor |
| Surround Sound Channel Configuration | 6.1 |
| Included Components | 6 satellite speakers and 1 subwoofer |
| Is Waterproof | FALSE |
| Item Weight | 54.9 pounds |
| Product Dimensions | 38 x 21 x 15 inches |
| Speaker Maximum Output Power | 25 Watts (per satellite speaker) |
| Frequency Response | 40 Hz (subwoofer) |
| Connectivity Technology | Wi-Fi (via amplifier), Bluetooth (via amplifier), Wired |
| Woofer Diameter | 203 Millimeters |
8. Warranty and Support
The Sonance MAG Series 6.1 Outdoor Streaming Sound System comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Sonance customer support through their official website or the retailer from whom you purchased the product.
