AZDOME RCM550 Rear Camera Instruction Manual

1. Product Overview

The AZDOME RCM550 is a Full HD 1080P rear camera designed to provide a 150-degree wide-angle view, enhancing your driving safety and recording capabilities. It is specifically compatible with the AZDOME M550 Dash Cam system, offering a seamless integration for comprehensive vehicle surveillance.

Image 1.1: The AZDOME RCM550 rear camera unit with its 20ft connection cable.

This camera utilizes a high-quality CMOS optical sensor and connects via an RCA connector, ensuring reliable video transmission. Its surface mount installation type allows for flexible placement on your vehicle.

2. Setup and Installation

Proper installation is crucial for optimal performance of your AZDOME RCM550 rear camera. Please follow these steps carefully.

2.1. Package Contents

• AZDOME RCM550 Rear Camera
• 20ft RCA Video Cable
• Mounting Screws/Adhesive (if included with specific kit)

2.2. Installation Steps

1. Choose Mounting Location: Select a suitable location on the rear of your vehicle, typically above the license plate or near the rear window, ensuring a clear 150-degree view. The camera is designed for surface mount installation.
2. Secure the Camera: Use the provided mounting screws or strong adhesive to firmly attach the rear camera to the chosen location. Ensure it is stable and does not obstruct any vehicle functions.
3. Route the Cable: Carefully route the 20ft RCA video cable from the rear camera to the location of your AZDOME M550 Dash Cam. This typically involves tucking the cable along the vehicle's headliner, A-pillars, or under floor mats to conceal it and prevent interference.
4. Connect to Dash Cam: Plug the RCA connector of the rear camera cable into the designated rear camera input port on your AZDOME M550 Dash Cam.
5. Power Connection (if applicable): If your specific setup requires a separate power connection for the rear camera (e.g., for reverse trigger), connect the red wire to your vehicle's reverse light positive wire and the black wire to a ground point. Note: The RCM550 typically draws power directly from the M550 Dash Cam via the RCA cable, so a separate power connection might not be needed for basic recording. Consult your M550 manual for specific wiring diagrams.
6. Test the Connection: Power on your AZDOME M550 Dash Cam and verify that the rear camera feed is displayed correctly on the dash cam screen. Adjust the camera angle if necessary to achieve the desired view.

Image 2.1: Diagram illustrating the shielded Ethernet cable design for stable signal transmission, which is used in the rear camera's connection.

3. Operating the Rear Camera

The AZDOME RCM550 rear camera operates in conjunction with your AZDOME M550 Dash Cam. Its functionality is primarily controlled through the dash cam's interface.

3.1. Recording Modes

• Simultaneous Recording: When connected, the RCM550 will automatically record simultaneously with the front camera of your M550 Dash Cam. Both video feeds are typically saved as separate files or as a picture-in-picture display, depending on your dash cam's settings.
• Parking Monitor Mode: If your M550 Dash Cam supports parking monitor functionality and is properly hardwired, the rear camera will also record events when the vehicle is parked and motion/impact is detected.

3.2. Live View and Playback

• Live View: Access the live feed from the rear camera through the display screen of your M550 Dash Cam. Refer to your M550 manual for instructions on switching between front, rear, or picture-in-picture views.
• Video Playback: Recorded rear camera footage can be reviewed directly on the M550 Dash Cam's screen or by transferring the memory card to a computer.

3.3. Reverse Assist Function (Optional)

If the rear camera is wired to your vehicle's reverse lights, it can automatically display a full-screen rear view with parking guidelines on the M550 Dash Cam's display when the vehicle is shifted into reverse. This feature provides visual assistance for parking and backing up.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your AZDOME RCM550 rear camera.

• Lens Cleaning: Periodically clean the camera lens with a soft, lint-free cloth. For stubborn dirt, use a small amount of lens cleaning solution. Avoid abrasive materials that could scratch the lens.
• Cable Inspection: Check the video cable for any signs of wear, kinks, or damage. Ensure all connections are secure.
• Mounting Security: Verify that the camera remains securely mounted to your vehicle. Re-tighten screws or re-apply adhesive if necessary.
• Software Updates: Keep your AZDOME M550 Dash Cam's firmware updated, as this can sometimes improve compatibility and performance with connected accessories like the rear camera.

5. Troubleshooting

If you encounter issues with your AZDOME RCM550 rear camera, refer to the following common problems and solutions.

For further assistance, please contact AZDOME customer support.

6. Specifications

7. Warranty and Support

AZDOME provides comprehensive support for its products.

7.1. Warranty Information

This product comes with a 1-Year Warranty from the date of purchase. AZDOME offers a 30-Day Return Policy and accepts returns on defects. Please retain your proof of purchase for warranty claims.

7.2. Customer Support

For any questions, technical assistance, or warranty claims, please contact AZDOME customer support:

• Email: service@azdomevip.com
• Phone: (833) 667-5545

Please provide your product model (RCM550) and purchase details when contacting support for faster service.