Product Overview
Air Glove Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way onto the hands of great athletes around the world. The Air Glove features a compression-molded cuff and a single-layer palm with laser perforated holes for breathability. Micro-mesh is used all over for added ventilation. Silicon print on finger offers a grippy spot for brake lever grip.
Setup and Initial Inspection
Before first use, carefully inspect your Troy Lee Designs Air Gloves for any signs of damage or manufacturing defects. Ensure all seams are intact and the material is free from tears or snags. Verify the fit is comfortable and secure, allowing for full range of motion without excessive tightness or looseness.
Figure 1: Front view of the Troy Lee Designs KTM Air Glove. This image displays the glove's primary colors of orange, blue, and black, along with the prominent KTM and Troy Lee Designs branding on the back of the hand.
Operating Instructions
The Troy Lee Designs Air Glove is designed for optimal performance and comfort during cycling and similar activities. Follow these guidelines for proper use:
- Wearing the Gloves: Slide your hand into the glove, ensuring your fingers are fully seated in each digit. Secure the compression molded cuff using the top velcro closure for a snug, comfortable fit around your wrist.
- Enhanced Grip: The single-layer perforated palm provides excellent tactile feel and grip. The silicone print on the fingertips is specifically designed to enhance lever grip, preventing slippage during braking or shifting.
- Ventilation: The micro-mesh construction and laser perforated holes in the palm promote airflow, keeping your hands cool and dry during intense activity.
- Finger Protection: The gloves incorporate 2 inner TPR (Thermoplastic Rubber) elements for finger protection, offering a degree of impact resistance.
Figure 2: Palm view of the Troy Lee Designs KTM Air Glove. This image highlights the black palm material, blue accents, and the 'AIR' logo, demonstrating the glove's design from the underside.
Maintenance and Care
Proper care will extend the life of your Troy Lee Designs Air Gloves:
- Cleaning: Hand wash in cold water with a mild detergent. Do not use bleach or harsh chemicals.
- Drying: Air dry only. Do not tumble dry, iron, or dry clean. Avoid direct sunlight or high heat, as this can damage the materials.
- Storage: Store gloves in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
If you encounter any issues with your gloves, consider the following:
- Fit Issues: If gloves feel too tight or too loose, ensure you have selected the correct size. Refer to the manufacturer's sizing guide if available.
- Reduced Grip: Ensure the palm and silicone prints are clean. Dirt or oil can reduce grip effectiveness.
- Material Wear: Over time, materials may show signs of wear. Regular inspection and proper maintenance can prolong glove life. If significant damage occurs, consider replacement for safety.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 17.78 x 27.94 x 3.81 cm |
| Item Model Number | 404856001 |
| Age Range | Adult |
| Colour | Orange |
| Size | Small |
| Hand Orientation | Ambidextrous |
| Style | Compression, Cuff |
| Material | Silicone |
| Special Features | Breathable |
| Sport | Cycling |
| Item Weight | 50 g |
| First Available Date | Aug. 24 2021 |
Warranty Information
For detailed warranty information regarding your Troy Lee Designs Air Gloves, please refer to the official Troy Lee Designs website or contact their customer service directly. Warranty terms and conditions may vary based on region and purchase location.
Customer Support
Should you require further assistance, have questions about your product, or need to report an issue, please visit the official Troy Lee Designs website for their customer support contact information. You may find FAQs, contact forms, or direct phone numbers there.
Official Brand Store: Troy Lee Designs Store on Amazon.ca
