Introduction
This manual provides essential instructions for the safe and effective use of your JBL JR 460NC Wireless Over-Ear Noise Cancelling Kids Headphones. These headphones are designed to deliver quality audio with a focus on child safety, featuring a volume limit below 85dB and Active Noise Cancelling technology for enhanced focus.
Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
To ensure safe operation and prevent potential harm, observe the following:
- Volume Limit: The JBL JR 460NC headphones are engineered with a maximum volume output of less than 85dB to protect children's hearing. Avoid modifying this safety feature.
- Supervision: Adult supervision is recommended, especially for younger children, to ensure proper usage and care.
- Cleaning: Use a soft, dry cloth for cleaning. Avoid liquid cleaners or harsh chemicals.
- Storage: Store headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Choking Hazard: Keep small parts and cables away from young children to prevent choking hazards.

Image: Decibel chart illustrating safe sound levels, emphasizing JBL's commitment to keeping volume below 85dB for child safety.
What's in the Box
Verify that all components are present upon unboxing:
- 1 x JBL JR 460NC Headphones
- 1 x Type-C to Type-A Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x Quick Start Guide / Safety Sheet
- 1 x Warranty / Warning Information

Image: The JBL JR 460NC headphones, showcasing their design and color.
Setup
1. Charging the Headphones
Before initial use, fully charge the headphones. A full charge takes approximately 2 hours and provides up to 20 hours of playtime with Active Noise Cancelling (ANC) enabled, or up to 30 hours with ANC disabled.
- Connect the Type-C end of the charging cable to the charging port on the headphone.
- Connect the Type-A end of the charging cable to a USB power source (e.g., computer, wall adapter).
- The LED indicator will show charging status and turn off when fully charged.
2. Bluetooth Pairing
To connect your headphones wirelessly via Bluetooth 5.0:
- Ensure the headphones are charged and powered off.
- Press and hold the Power button for approximately 3-5 seconds until the LED indicator flashes blue, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "JBL JR 460NC" from the list of detected devices.
- Once connected, the LED indicator will turn solid blue.

Image: Detailed view of the headphone's control panel, showing buttons and ports for charging and audio input.
3. Wired Connection
For a wired connection, use the included 3.5mm audio cable:
- Plug one end of the 3.5mm audio cable into the audio jack on the headphone.
- Plug the other end into the 3.5mm audio output of your device.
- The headphones will function in passive mode, even if the battery is depleted.
Operating Instructions
Power On/Off
- Power On: Press and hold the Power button for 2 seconds. The LED indicator will light up.
- Power Off: Press and hold the Power button for 3 seconds. The LED indicator will turn off.
Active Noise Cancelling (ANC)
The Active Noise Cancelling feature helps reduce ambient noise, allowing for better focus.
- Activate/Deactivate ANC: Press the dedicated ANC button (refer to the Quick Start Guide for button location). The LED indicator will illuminate when ANC is active.

Image: A child focused on a laptop while wearing the headphones, highlighting the benefit of Active Noise Cancelling for concentration.
Microphone Usage
The built-in microphone allows for clear communication during calls or online learning sessions.
- The microphone automatically activates when connected to a device that supports voice input.

Image: A child wearing the headphones, emphasizing the built-in microphone and extended battery life.
Volume and Playback Controls
The headphones feature media controls for managing audio playback. Due to the safe volume limit, direct volume control on the headphones may be simplified or absent, relying on the connected device for precise adjustments within the safe range.
- Play/Pause: Press the multi-function button once.
- Next Track: Double-press the multi-function button.
- Previous Track: Triple-press the multi-function button.
- Answer/End Call: Press the multi-function button once.
Maintenance
- Cleaning: Gently wipe the earcups and headband with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Storage: When not in use, store the headphones in a protective case or a clean, dry environment to prevent dust accumulation and damage.
- Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in constant use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Battery is depleted. | Charge the headphones using the provided USB-C cable. |
| Cannot pair via Bluetooth. | Headphones not in pairing mode; device Bluetooth off; interference. | Ensure headphones are in pairing mode (flashing blue LED). Turn device Bluetooth off and on. Move closer to the device. |
| No sound or low volume. | Volume on device is too low; headphones not connected; wired cable not fully inserted. | Increase volume on the connected device. Re-establish Bluetooth connection or re-insert 3.5mm audio cable firmly. |
| Active Noise Cancelling not working. | ANC feature is not activated. | Press the ANC button to activate the feature. Ensure headphones are powered on. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | JR 460NC |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth 5.0 |
| Noise Control | Active Noise Cancellation |
| Headphones Jack | 3.5 mm Jack |
| Battery Life | Up to 30 Hours (ANC off), Up to 20 Hours (ANC on) |
| Charging Time | 2 Hours |
| Audio Driver Type | Dynamic Driver |
| Frequency Range | 20 Hz - 20 kHz |
| Impedance | 32 Ohm |
| Item Weight | 200 Grams (7.1 ounces) |
| Product Dimensions | 8.75 x 7.75 x 2.25 inches |
| Material | Plastic |
| Age Range (Description) | Kid |
| Control Type | Media Control |
| Ear Placement | Over Ear |
| Water Resistance Level | Not Water Resistant |
Warranty and Support
Your JBL JR 460NC headphones come with a manufacturer's warranty. Please refer to the included "Warranty / Warning Information" sheet for details regarding warranty coverage, terms, and conditions.
For technical support, product inquiries, or additional assistance, please visit the official JBL website or contact JBL customer service.
You can find more information and support resources at the JBL Store.





