Introduction
Thank you for choosing the IKEA KUNGSFORS Wall Grid. This stainless steel grid is designed to help you organize your kitchen or other spaces efficiently. This manual contains important information regarding the assembly, use, and care of your product. Please read it carefully and retain it for future reference.
Safety Information
WARNING:
- Always use appropriate fixing devices for your specific wall type. Different wall materials require different types of fasteners.
- Be aware of weight limits based on your wall material and the chosen fixing devices.
- Do not overload the wall grid. Overloading can cause the grid to detach from the wall, leading to injury or damage.
- Always follow proper installation techniques to prevent accidents and ensure stability.
Setup and Installation
The IKEA KUNGSFORS Wall Grid requires assembly and wall mounting. Included mounting hardware is provided for standard installation. For specific wall types, additional fixing devices may be necessary (sold separately).
Required Components:
- IKEA KUNGSFORS Wall Grid (1 unit)
- Mounting Hardware (included)
Assembly Instructions:
- Unpack all components and verify that all parts are present.
- Select a suitable location on your wall for installation. Consider the height and accessibility for your intended use.
- Using the included mounting hardware, mark the drilling points on the wall. Ensure the marks are level and correctly spaced according to the grid's dimensions.
- Drill holes at the marked points. Use a drill bit appropriate for your wall material and the chosen fixing devices.
- Insert wall plugs (if required for your wall type) into the drilled holes.
- Position the wall grid against the wall, aligning the mounting holes with the drilled holes/wall plugs.
- Secure the grid to the wall using the screws provided. Tighten firmly but do not overtighten.
- Alternatively, the grid can be attached to a KUNGSFORS suspension rail (sold separately) for increased flexibility. Follow the instructions provided with the suspension rail for this method.
Image: The IKEA KUNGSFORS Wall Grid mounted on a kitchen wall, demonstrating its use for organizing kitchen tools and storage. The grid is made of stainless steel and features horizontal bars with hooks for hanging items, and a lower shelf for containers.
Operating and Usage
The KUNGSFORS Wall Grid is designed for efficient storage and organization in various rooms, particularly kitchens. Its space-saving design helps maximize vertical space.
- Storage: Use the grid for hanging kitchen utensils, small pots, or other items using compatible hooks (sold separately).
- Wall Organization: The grid can be combined with other KUNGSFORS accessories, such as shelves or containers, to create a customized storage solution.
- Versatility: Suitable for kitchen storage, organizing craft supplies, or displaying small decorative items.
Maintenance
To ensure the longevity and appearance of your stainless steel wall grid, follow these simple care instructions:
- Cleaning: Wipe the surface with a dry cloth. For more stubborn marks, use a damp cloth with a mild detergent, then dry thoroughly.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can scratch or damage the stainless steel finish.
- Regular Inspection: Periodically check the mounting screws to ensure they remain tight and secure. Retighten if necessary.
Troubleshooting
This section addresses common issues you might encounter with your KUNGSFORS Wall Grid.
- Grid feels loose after installation: Ensure all mounting screws are properly tightened. If mounted to a wall, verify that the correct fixing devices were used for your wall material. If mounted to a suspension rail, ensure the rail itself is securely fastened.
- Items slide off hooks: Ensure you are using hooks designed for the KUNGSFORS system or similar compatible hooks that securely attach to the grid bars. Avoid overloading individual hooks.
- Rust spots appear: While stainless steel is resistant to rust, it is not entirely rust-proof. Ensure the grid is kept dry, especially after cleaning. Remove any rust spots immediately with a stainless steel cleaner and a soft cloth to prevent further spread.
Specifications
| Brand | IKEA |
| Model Number | 73239390 |
| Product Name | Wall Grid Shelf |
| Material | Stainless Steel |
| Color | Silver |
| Mounting Type | Wall Mount |
| Room Type | Kitchen |
| Shelf Type | Grid Shelf |
| Number of Shelves | 1 |
| Special Feature | Space Saving |
| Shape | Rectangular |
| Finish Type | Stainless Steel |
| Product Care Instructions | Wipe with Dry Cloth |
| Recommended Uses | Storage, Kitchen Storage, Wall Organization |
| Required Assembly | Yes |
| Included Components | Mounting Hardware |
| Item Weight | 1.2 Kilograms |
| Item Dimensions (L x W x H) | 22.05 x 10.24 x 1.18 inches |
| Item Depth | 26.5 cm (10.5 inches) |
| Minimum Required Door Width | 56 Centimeters (22 inches) |
Warranty Information
For detailed warranty information regarding your IKEA KUNGSFORS Wall Grid, please refer to the official IKEA website or the purchase documentation provided at the time of sale. Warranty terms and conditions may vary by region.
Customer Support
If you have any questions, require assistance with assembly, or need to report a defect, please contact IKEA customer service. You can find contact information on the official IKEA website or through your local IKEA store.
For additional resources and product information, visit: www.ikea.com
