Razer BlackShark V2 Pro Wireless Gaming Headset User Manual

1. Introduction

The Razer BlackShark V2 Pro is a high-performance wireless gaming headset designed for competitive esports. It features THX 7.1 Spatial Surround Sound, 50mm Razer Triforce Titanium Drivers, and a detachable Razer HyperClear Supercardioid Mic, providing exceptional audio clarity and communication. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your headset to ensure optimal performance.

Image: The Razer BlackShark V2 Pro Wireless Gaming Headset in white, showcasing its design with the detachable microphone and the accompanying USB wireless transceiver.

2. What's in the Box

Verify that all components are present in your package:

• Razer BlackShark V2 Pro Headset
• Removable Razer HyperClear Supercardioid Mic
• USB wireless transceiver
• Charging Cable (USB-A to Micro-USB)
• User Manual

3. Setup

3.1 Charging the Headset

Before first use, fully charge your Razer BlackShark V2 Pro headset. Connect the included charging cable to the headset's Micro-USB port and the other end to a powered USB port (e.g., computer, USB wall adapter). The LED indicator on the headset will show charging status.

3.2 Connecting to PC/PS5/PS4/Switch (Wireless)

1. Insert the USB wireless transceiver into an available USB port on your PC, PlayStation console, or Nintendo Switch dock.
2. Power on the Razer BlackShark V2 Pro headset by pressing and holding the power button until the LED indicator lights up.
3. The headset should automatically pair with the transceiver. A solid green LED on the headset indicates a successful connection.
4. On your device, ensure the Razer BlackShark V2 Pro is selected as the default audio input and output device.

Image: The Razer BlackShark V2 Pro headset displayed on a stand in a gaming environment, illustrating its wireless capabilities and compatibility with various gaming platforms.

3.3 Connecting to Devices (Wired)

For wired connection, simply plug a 3.5mm audio cable (not included) into the headset's 3.5mm jack and the other end into your device's audio output. The wireless features will be disabled in wired mode.

4. Operating Instructions

4.1 Headset Controls

• Volume Control Dial: Located on the left earcup, rotate to adjust the master volume.
• Mic Mute Button: Press to mute/unmute the microphone. The LED on the microphone tip will indicate mute status.
• Power Button: Press and hold to power on/off. A quick press can also function as a play/pause or answer/end call button depending on the connected device.
• THX Spatial Audio Button: Press to toggle THX Spatial Audio on/off (PC only, requires Razer Synapse software).

4.2 Detachable Razer HyperClear Supercardioid Mic

The headset features a detachable microphone for clear voice communication. To attach, align the microphone's connector with the port on the left earcup and push firmly until it clicks into place. To detach, gently pull the microphone straight out.

Image: A diagram illustrating the supercardioid pickup pattern of the Razer HyperClear microphone, designed for focused voice capture and noise suppression.

4.3 Razer Triforce Titanium 50mm Drivers

Experience superior audio performance with the custom-tuned 50mm drivers. These drivers are designed to deliver clear highs, balanced mids, and powerful bass for an immersive gaming experience.

Image: An exploded view of the Razer Triforce Titanium 50mm driver, highlighting its three-part design for individual tuning of audio frequencies (highs, mids, lows).

4.4 THX Spatial Audio

For PC users, enable THX Spatial Audio via Razer Synapse software to experience advanced positional audio, providing a competitive edge in games by accurately pinpointing enemy locations and environmental cues.

4.5 Comfort Features

The headset is equipped with ultra-soft breathable memory foam ear cushions that prevent overheating and pressure build-up during extended use. The lightweight design ensures long-lasting comfort.

Image: A close-up view of the ultra-soft breathable memory foam ear cushions, emphasizing their material and oval design for enhanced comfort and heat reduction.

4.6 Noise Cancellation

The headset features advanced passive noise cancellation, effectively blocking ambient noise from your surroundings and providing a secure seal to reduce sound leakage, allowing for uninterrupted focus during gameplay.

Image: The Razer BlackShark V2 Pro headset positioned on a desk, demonstrating its design for advanced passive noise cancellation, which helps block ambient sounds and reduce sound leakage.

4.7 Official Product Video

Watch the official product video for a visual overview of the Razer BlackShark V2 Pro's key features and benefits.

5. Maintenance

5.1 Cleaning

• Use a soft, dry cloth to clean the headset.
• Do not use harsh chemicals or abrasive materials.
• For ear cushions, gently wipe with a damp cloth and allow to air dry completely before use.

5.2 Storage

Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is recommended to store it in a protective case (if available) to prevent damage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Razer products come with a limited warranty. For detailed warranty information, please visit the official Razer website or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.

8.1 Technical Support

If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Razer Customer Support:

• Online Support: Visit the official Razer Support website for FAQs, drivers, and software downloads. support.razer.com
• User Manual (PDF): A downloadable PDF version of the user manual is available for your convenience. Download PDF Manual

For the latest software and firmware updates, please visit the Razer Synapse page on the official Razer website.