1. Introduction
The Morimoto Retro-Quik RQ130 bracket is a universal mounting solution designed to facilitate the installation of Mini H1 7.0 projectors into Subaru Legacy headlights. This bracket ensures a secure and precise fit, simplifying the retrofit process for enhanced lighting performance.
2. Package Contents
Please verify that all components are present before beginning installation.
- 1x Morimoto Retro-Quik RQ130 Bracket
- Mounting Hardware (screws, nuts, washers)
3. Specifications
| Feature | Detail |
|---|---|
| Model | RQ130 |
| Brand | Morimoto |
| Manufacturer | Morimoto Lighting |
| Material (Bracket) | G10 Fiberglass |
| Material (Hardware) | Stainless Steel |
| Item Weight | 1 pound |
| Package Dimensions | 5.75 x 3.75 x 0.3 inches |
| Compatible Projector | Mini H1 7.0 |
| Compatible Vehicle | Subaru Legacy |
4. Setup and Installation
Installation of the Retro-Quik bracket involves modifying your vehicle's headlights. It is recommended that this procedure be performed by individuals with experience in automotive lighting retrofits or by a qualified professional. Improper installation can lead to damage to the product, vehicle, or personal injury.
4.1 General Installation Steps
- Headlight Removal: Carefully remove the headlight assemblies from your Subaru Legacy vehicle according to the manufacturer's service manual.
- Headlight Disassembly: Open the headlight housing. This typically involves heating the sealant to separate the lens from the housing.
- Original Projector Removal (if applicable): Remove the existing projector or reflector bowl from the headlight housing.
- Bracket and Projector Assembly: Attach your Mini H1 7.0 projector to the Morimoto Retro-Quik RQ130 bracket using the provided mounting hardware. Ensure the projector is oriented correctly and securely fastened.
- Bracket Installation into Housing: Mount the assembled projector and bracket into the headlight housing. The RQ130 bracket is designed to align the projector in the correct position within the Subaru Legacy headlight. Secure it firmly using the appropriate mounting points and hardware.
- Alignment Check: Before sealing the headlight, perform a preliminary alignment check to ensure the projector beam pattern is level and aimed correctly. Adjust as necessary.
- Headlight Reassembly: Reseal the headlight housing, ensuring it is watertight. Reinstall the headlight assemblies into your vehicle.
- Final Alignment: Perform a final beam alignment on a level surface against a wall to ensure proper light distribution and compliance with local regulations.
Image 1: Two Morimoto Retro-Quik brackets with Mini H1 7.0 projectors mounted, showcasing the front-side view of the assembly.
Image 2: A close-up view of two Morimoto Retro-Quik brackets with Mini H1 7.0 projectors, highlighting the lens and mounting details.
5. Operating
The Morimoto Retro-Quik RQ130 bracket is a passive component. Once correctly installed, its primary function is to securely hold the Mini H1 7.0 projector in the optimal position within the headlight housing. Proper operation is dependent on the correct installation of the bracket and the functionality of the projector itself.
6. Maintenance
Minimal maintenance is required for the Retro-Quik bracket itself.
- Periodic Inspection: Annually, or during other headlight maintenance, inspect the mounting hardware for tightness. Vibrations from vehicle operation can sometimes loosen fasteners over time.
- Corrosion Check: Ensure that the stainless steel hardware remains free from significant corrosion, especially if operating in harsh environments.
- Cleaning: If the bracket becomes dirty during headlight disassembly, wipe it clean with a soft, dry cloth. Avoid harsh chemicals.
7. Troubleshooting
If issues arise after installation, consider the following:
- Projector Misalignment: If the light beam appears crooked or improperly aimed, re-check the projector's seating on the bracket and the bracket's mounting within the headlight housing. Ensure all fasteners are tight and the projector is level.
- Loose Bracket: If you notice excessive vibration or movement of the projector, verify that all mounting hardware securing the bracket and projector is tightened appropriately.
- Water Ingress: If moisture is found inside the headlight, it indicates an improper seal during reassembly. This is not directly related to the bracket but can affect its performance. The headlight must be re-opened, dried, and resealed properly.
8. Warranty and Support
The Morimoto Retro-Quik Brackets are backed by a 5-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications.
For technical support, warranty claims, or further assistance, please contact Morimoto customer service through their official website or authorized dealers. Please have your purchase receipt and product model number (RQ130) available when contacting support.
