1. Introduction
Thank you for choosing the Lefant F1 Robot Vacuum Cleaner. This robotic vacuum and mop combo is designed to provide efficient and convenient cleaning for your home. With powerful suction, a compact design, and intelligent navigation, the F1 is ideal for various floor types and pet hair. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Package Contents
Please check the package contents carefully. If any items are missing or damaged, contact customer support.
- Lefant F1 Robot Vacuum and Mop
- Charging Station
- Power Adapter
- 600ml Dust Box (pre-installed)
- Side Brushes (4x)
- HEPA Filters (2x)
- User Manual
- Washable Dry Cloths (2x)
- Disposable Wipes (10x)
- 2m Magnetic Boundary Strip
3. Product Features
- Compact Design with Large Dustbin: The F1 features a thin body (11 inches diameter, 2.71 inches height) allowing it to clean under furniture. It is equipped with a large 600ml visible dustbin, reducing the frequency of emptying.
- Powerful Suction & Extended Runtime: With a suction power of up to 4000Pa, the F1 effectively picks up pet hair, crumbs, and debris. Its 3600mAh Li-ion battery provides up to 200 minutes of runtime, covering approximately 2153 sqft on a single charge.
- Brushless Suction Port & Durable Battery: The F1 utilizes a brushless suction port to prevent entanglement, especially with pet hair. The visible dust box allows you to monitor its fill level. It is powered by a Lithium iron phosphate battery, offering enhanced safety and durability with up to 2000 charge cycles.
- Smart Control: Easily connect the F1 to the Lefant App for scheduling, cleaning trajectory viewing, and remote control. It is also compatible with Google Assistant and Amazon Alexa for convenient voice commands. (Note: Supports 2.4 GHz Wi-Fi only).
- Freemove 3.0 Technology: This integrated whole-body detection technology uses built-in anti-collision infrared sensors to automatically sense and avoid obstacles, reducing the risk of getting stuck. The app's Freemove button allows for advanced obstacle sensing.
- 2-in-1 Vacuuming and Mopping: The F1 offers both vacuuming and mopping functionalities. Attach the included washable dry cloths or disposable wet wipes to the bottom of the machine to enable mopping (no water tank required).
4. Setup
- Unpack the Robot: Carefully remove the robot vacuum and all accessories from the packaging. Remove any protective films or packing materials.
- Install Side Brushes: Snap the two side brushes onto the posts on the bottom of the robot until they click into place.
- Place Charging Station: Position the charging station against a wall in an open, uncluttered area with at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front. Plug the power adapter into the charging station and then into a wall outlet.
- Initial Charge: Place the robot onto the charging station, ensuring the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot (approximately 4-5 hours).
- Download Lefant App: Scan the QR code in the manual or search for "Lefant Life" in your app store (Google Play or Apple App Store). Follow the in-app instructions to register an account and connect your F1 robot vacuum to your 2.4 GHz Wi-Fi network.
5. Operating Instructions
5.1 Starting and Stopping Cleaning
- Manual Start: Press the power button on the robot once to start cleaning. Press it again to pause.
- App Control: Open the Lefant App, select your F1 robot, and tap the "Start" button to begin cleaning. Use the app to pause or send the robot back to its charging station.
- Voice Control: If connected to Amazon Alexa or Google Assistant, use commands like "Alexa, start F1" or "Hey Google, tell F1 to clean."
5.2 Cleaning Modes
The F1 automatically adjusts its cleaning path based on its environment. You can select specific modes via the Lefant App:
- Auto Cleaning: Default mode for general cleaning.
- Spot Cleaning: Focuses on a specific dirty area.
- Edge Cleaning: Cleans along walls and furniture edges.
5.3 Using Magnetic Boundary Strips
The included magnetic boundary strips can be used to create virtual walls, preventing the robot from entering certain areas. Place the strip flat on the floor in front of the area you want to block off.
5.4 Mopping Function
To use the mopping function:
- Attach a washable dry cloth or a disposable wet wipe to the bottom of the robot using the designated slots.
- Ensure the cloth is securely fastened.
- Start the cleaning cycle. The robot will now vacuum and mop simultaneously.
6. Maintenance
Regular maintenance ensures optimal performance of your Lefant F1 robot vacuum.
6.1 Emptying the Dust Box
It is recommended to empty the dust box after each cleaning cycle, especially if you have pets or a large area to clean.
- Press the dust box release button and pull out the dust box.
- Open the dust box lid and empty its contents into a trash bin.
- Close the lid and reinsert the dust box into the robot until it clicks into place.
6.2 Cleaning the Filter
Clean the HEPA filter regularly (weekly recommended) and replace it every 1-3 months depending on usage.
- Remove the filter from the dust box.
- Tap the filter gently over a trash bin to remove dust. Do not wash the HEPA filter with water.
- Brush off any remaining debris with the cleaning tool.
6.3 Cleaning Side Brushes
Check side brushes regularly for tangled hair or debris. Remove and clean them as needed.
- Gently pull the side brushes upwards to remove them.
- Remove any hair or debris wrapped around the brushes.
- Reattach the brushes by pressing them down until they click.
6.4 Cleaning Sensors and Charging Contacts
Wipe the anti-drop sensors (on the bottom of the robot) and anti-collision sensors (on the bumper) with a clean, dry cloth. Also, wipe the charging contacts on both the robot and the charging station.
7. Troubleshooting
If you encounter issues with your Lefant F1, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Charge the robot; Ensure power switch is ON; Clear obstacles. |
| Robot cannot return to charging station. | Charging station obstructed; Robot too far; Dirty charging contacts. | Clear area around station; Manually place robot closer; Clean contacts. |
| Suction power is weak. | Full dust box; Clogged filter; Blocked suction port. | Empty dust box; Clean/replace filter; Clear suction port. |
| Robot gets stuck frequently. | Too many obstacles; Dark surfaces (anti-drop sensors). | Clear clutter; Use magnetic strips for problem areas. |
| App connection issues. | Incorrect Wi-Fi (not 2.4GHz); Weak signal; Incorrect password. | Ensure 2.4GHz Wi-Fi; Move robot closer to router; Re-enter password. |
If the problem persists after trying these solutions, please contact Lefant customer support for further assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | F1 |
| Item Weight | 7.98 Pounds |
| Product Dimensions | 28L x 28W x 7H Centimetres |
| Form Factor | Robotic |
| Dust Bin Capacity | 600 ML |
| Suction Power | 4000pa |
| Battery Life | 200 minutes |
| Battery Cell Composition | Lithium-Phosphate (3600mAh) |
| Filter Type | Sponge (HEPA) |
| Controller Type | App Control/Button Control/Remote Control/Voice Control |
| Surface Recommendation | Hard Floor/Carpet/Tile/Wood/Marble/Glass |
| Special Features | Self-Charging, Anti-Fall, Anti-Collision, Washable Filter |
9. Warranty and Support
The Lefant F1 Robot Vacuum Cleaner comes with a 12-month worry-free warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
For warranty claims, technical support, or any questions not covered in this manual, please contact Lefant customer support through the official website or your purchase platform. Please have your model number and purchase information ready when contacting support.
