1. Safety Instructions
Read these instructions carefully before using the appliance and keep them for future reference. Incorrect use may result in damage to the appliance or injury to the user.
- Electrical Safety: Ensure the appliance is connected to a properly grounded electrical outlet. Do not use extension cords or adapters. Disconnect the appliance from the power supply before any cleaning or maintenance.
- Water Safety: Ensure water inlet and drain hoses are securely connected to prevent leaks. Do not operate the machine if there is visible damage to the water supply or drainage system.
- Child Safety: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- General Use: Do not wash items that are soiled with flammable substances. Do not attempt to repair the appliance yourself. Contact qualified service personnel for repairs.
2. Unpacking and Installation
2.1 Unpacking
- Remove all packaging materials, including the polystyrene base and any protective film.
- Locate and remove the transport bolts from the rear of the machine. These bolts secure the drum during transit and must be removed before operation to prevent damage. Keep them for future transport.
2.2 Positioning
- Place the washing machine on a firm, level floor.
- Adjust the leveling feet at the bottom of the machine to ensure it is stable and perfectly level. Use a spirit level for accuracy.
- Ensure there is adequate space around the machine for ventilation and ease of access.
2.3 Water Connection
- Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Ensure the connection is tight to prevent leaks.
- Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fixed to prevent displacement during operation. The drain hose should be at a height between 60 cm and 100 cm from the floor.
2.4 Electrical Connection
- Plug the power cord into a dedicated, grounded electrical outlet.
- Ensure the voltage and frequency of your electrical supply match the specifications on the appliance's rating plate.

Figure 1: Front view of the Aspes ALS2116 washing machine. This image illustrates the general appearance of the appliance, useful for identifying the product during unpacking and installation.
3. Control Panel Overview
The control panel allows you to select wash programs and adjust settings. Familiarize yourself with its components:
- Program Selector Dial: Used to choose the desired wash program. Turn the dial to align the indicator with the program name.
- Display Screen: Shows information such as remaining time, selected options, and error codes.
- Function Buttons: These buttons allow you to modify program settings, such as spin speed, temperature, delay start, or pre-wash. Specific functions may vary by model.
- Start/Pause Button: Initiates or pauses the selected wash program.

Figure 2: Top-down view of the Aspes ALS2116 washing machine, highlighting the control panel. This image helps users identify the program selector dial, display screen, and various function buttons for operation.
4. Operating Instructions
4.1 Before First Use
Before washing laundry for the first time, run an empty wash cycle to clean the drum and remove any manufacturing residues:
- Add a small amount of detergent to the main wash compartment.
- Select a short program at a high temperature (e.g., 60°C).
- Start the cycle without any laundry.
4.2 Loading Laundry
- Sort laundry by fabric type, color, and degree of soiling.
- Open the door and load items loosely into the drum. Do not overload the machine; leave enough space for the laundry to move freely.
- Close the door firmly until it clicks.
4.3 Adding Detergent and Additives
Open the detergent dispenser drawer and add detergent and fabric softener to the appropriate compartments. Refer to the detergent packaging for recommended dosages.
- Compartment I: Pre-wash detergent (if applicable).
- Compartment II: Main wash detergent.
- Compartment III (Flower symbol): Fabric softener or conditioner.
4.4 Selecting a Program
- Turn the Program Selector Dial to choose the desired wash program (e.g., Cotton, Synthetics, Delicates).
- Adjust any additional options using the function buttons (e.g., spin speed, temperature, extra rinse).
4.5 Starting a Wash Cycle
Press the Start/Pause button to begin the selected wash program. The display will show the remaining time.
4.6 Ending a Wash Cycle
Once the program is complete, the machine will signal with an audible alert or a message on the display. The door will unlock automatically after a short delay. Open the door and remove your laundry.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the life of your washing machine.
5.1 Cleaning the Detergent Dispenser
Periodically remove the detergent dispenser drawer and rinse it under running water to remove any detergent residue. Use a brush if necessary. Reinsert the drawer once clean.
5.2 Cleaning the Drum
To prevent odors and maintain hygiene, run a drum cleaning cycle (if available) or an empty hot wash cycle with a specialized washing machine cleaner once a month.
5.3 Cleaning the Drain Filter
The drain filter collects lint and small objects. Clean it regularly (e.g., every few months) to prevent blockages.
- Place a shallow container under the filter cover to catch any residual water.
- Carefully open the filter cover (usually located at the bottom front of the machine).
- Slowly unscrew the filter, allowing water to drain.
- Remove any debris from the filter and rinse it thoroughly.
- Screw the filter back in tightly and close the cover.
5.4 Cleaning the Exterior
Wipe the exterior surfaces of the washing machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
Before contacting service, consult the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power supply; Door not closed properly; Program not selected; Start/Pause button not pressed. | Check power plug and fuse; Close door firmly; Select a program; Press Start/Pause button. |
| Water not filling | Water tap closed; Water inlet hose kinked or blocked. | Open water tap; Straighten hose; Clean filter in inlet hose. |
| Water not draining | Drain hose kinked or blocked; Drain filter blocked. | Straighten drain hose; Clean drain filter. |
| Excessive vibration/noise | Transport bolts not removed; Machine not level; Laundry unevenly distributed. | Remove transport bolts; Adjust leveling feet; Redistribute laundry in the drum. |
| Detergent residue in dispenser | Insufficient water pressure; Detergent clumping; Dispenser dirty. | Check water pressure; Use less detergent or liquid detergent; Clean dispenser. |
7. Specifications
Key technical details for the Aspes ALS2116 washing machine:
| Feature | Specification |
|---|---|
| Model | ALS2116 |
| Capacity | 6 Kg |
| Maximum Spin Speed | 1200 rpm |
| Energy Efficiency Class | D |
| Approximate Dimensions (H x W x D) | 87.5 cm x 40 cm x 61 cm |
| Power Supply | Mains electricity (EU Plug) |
| Water Consumption (per 100 cycles) | 43 Liters |
| Energy Consumption (per 100 cycles) | 65 kWh |
| Noise Level (Spin Cycle) | 80 dB |
| Material | Acrilonitrilo Butadieno Estireno (ABS) |

Figure 3: Energy label for the Aspes ALS2116 washing machine. This label provides official information on energy efficiency class, water consumption, energy consumption, and noise levels.
8. Warranty and Support
This Aspes ALS2116 washing machine comes with a standard manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed information.
For technical assistance, spare parts, or to report a fault, please contact Aspes customer support or an authorized service center. Contact details can typically be found on the manufacturer's official website or in the documentation provided with the appliance.