Acctim Acctim 16102
Acctim Kian CK6102 Pop Up Alarm Clock User Manual
Model: Acctim 16102
Introduction
The Acctim Kian CK6102 Pop Up Alarm Clock is a versatile 5-in-1 bedside companion designed for convenience and functionality. This digital alarm clock not only displays the time but also provides the day, date, month, temperature, and humidity. Its unique pop-up alarm feature allows for easy setting and checking of the alarm time. The clock features easy-to-read backlit digits and a convenient snooze button.

Image: Front view of the Acctim Kian CK6102 Pop Up Alarm Clock in Matt White, displaying time, date, humidity, and temperature.
Setup
Battery Installation
The Acctim Kian CK6102 requires 2x AAA batteries for operation (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back or bottom of the alarm clock.
- Open the battery compartment cover.
- Insert two AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Once batteries are installed, the clock display should activate.
Operating Instructions
Setting the Time
Refer to the buttons on the back or side of the clock for time setting. Typically, there will be a "SET" or "MODE" button and adjustment buttons (+/- or UP/DOWN).
- Press and hold the SET or MODE button until the time display starts flashing.
- Use the UP or DOWN buttons to adjust the hours.
- Press SET or MODE again to move to minutes, then adjust using UP or DOWN.
- Continue pressing SET or MODE to cycle through setting the year, month, and day, adjusting each with UP or DOWN.
- Press SET or MODE one last time to confirm and exit the setting mode.
Setting the Alarm
The Kian CK6102 features a unique pop-up alarm display.
- To set or check the alarm time, gently push the top of the clock. The alarm time display will pop up.
- While the alarm display is active, use the dedicated ALARM SET button (if present) or the general SET/MODE button to enter alarm setting mode.
- Adjust the alarm hours and minutes using the UP or DOWN buttons.
- Confirm the alarm time.
- To activate or deactivate the alarm, look for an alarm ON/OFF switch or button, often located near the alarm setting controls.
- To switch the alarm off after it sounds, push the top of the clock down again.

Image: The Acctim Kian CK6102 Pop Up Alarm Clock in Matt White, showing the smaller alarm display popped up from the top of the unit.
Snooze Function
When the alarm sounds, press the SNOOZE/LIGHT button (usually located on the top of the clock) to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
Backlight Operation
The clock features a backlit LCD display for easy readability in low light conditions. Press the SNOOZE/LIGHT button to illuminate the display. Some models may have an option for continuous backlight or an automatic light sensor.
Displaying Day/Date/Month, Temperature, and Humidity
The Acctim Kian CK6102 automatically displays the day, date, month, current temperature (in Celsius or Fahrenheit), and humidity percentage on its main screen. No special action is required to view these details once the clock is set up.

Image: The Acctim Kian CK6102 Pop Up Alarm Clock in Matt White, featuring a black digital display showing time, date, humidity, and temperature.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.
- Battery Replacement: Replace batteries when the display dims or the clock stops functioning correctly. Always replace both batteries at the same time.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
- Environment: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or dusty environments.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Display is blank or dim. | Batteries are low or incorrectly installed. Replace batteries or check polarity. |
| Alarm does not sound. | Alarm is not activated. Ensure the alarm is set to ON. Check alarm time. Batteries may be low. |
| Incorrect time/date. | Time/date needs to be reset. Follow "Setting the Time" instructions. |
| Temperature/Humidity readings seem inaccurate. | Ensure the clock is placed in a stable environment, away from direct heat sources, vents, or high humidity areas. Allow time for readings to stabilize after moving. |
Specifications
- Model Number: Acctim 16102
- Product Dimensions: 7.2 x 15 x 4.8 cm (D x W x H)
- Item Weight: 0.18 Kilograms (182 g)
- Colour: Matt White
- Display Type: Digital LCD, Backlit
- Power Source: Battery Powered (2x AAA batteries required, not included)
- Special Features: 5-in-1 functionality (Clock, Alarm, Day/Date/Month, Temperature Display, Humidity Display), Pop-up Alarm, Snooze Function
- Style: Modern
- Shape: Rectangular
- Room Type: Bedroom, Study Room

Image: The Acctim Kian CK6102 Pop Up Alarm Clock with indicated dimensions of 4.8cm height and 15cm width.
Warranty
The Acctim Kian CK6102 Pop Up Alarm Clock comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, please refer to the warranty information provided at the time of purchase or contact Acctim customer support.
Support
For further assistance, technical support, or inquiries regarding your Acctim Kian CK6102 Pop Up Alarm Clock, please visit the official Acctim website or contact their customer service department. You may also refer to the retailer where the product was purchased for support.
Acctim Official Store: Visit the Acctim Store on Amazon.co.uk
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







