1. Introduction
This manual provides instructions for the proper use and maintenance of your Spigen Mag Armor Back Cover Case, designed specifically for the iPhone 13 mini. This case offers robust protection while maintaining a slim profile and MagSafe compatibility.
2. Compatibility
The Spigen Mag Armor case (Model ACS03680) is exclusively designed for the iPhone 13 mini. It is not compatible with other iPhone models, including iPhone 13, iPhone 13 Pro, or iPhone 13 Pro Max.
Figure 2.1: Compatibility overview. This case is designed solely for the iPhone 13 mini. It will not fit iPhone 13, iPhone 13 Pro, or iPhone 13 Pro Max.
3. Key Features
- MagSafe Compatibility: Integrated magnets ensure secure attachment and efficient wireless charging with MagSafe accessories.
- Slim Protection: Designed to provide protection without adding excessive bulk to your device.
- Air Cushion Technology: Strategically placed air cushions absorb shock from impacts, enhancing drop protection.
- Raised Lips: Elevated edges around the camera and screen provide additional protection against surface scratches.
- Tactile Buttons: Ensures responsive feedback and easy pressing of device buttons.
3.1 MagSafe Integration
The case features an integrated magnetic ring for seamless compatibility with MagSafe chargers and accessories. This design ensures optimal alignment and charging efficiency.
Figure 3.1: The case is MagSafe compatible, allowing for secure attachment of MagSafe accessories and efficient wireless charging.
3.2 Slim Design and Protection
The Mag Armor case is engineered for a slim fit, adding minimal depth to your iPhone 13 mini while providing essential protection. The Air Cushion Technology is integrated into the corners to absorb impact.
Figure 3.2: The case maintains a slim profile, adding approximately 0.15 inches of depth to the device.
Figure 3.3: Multiple views of the Spigen Mag Armor case, highlighting its design and texture.
3.3 Camera and Screen Protection
The case features raised bezels around the camera module and the screen to prevent direct contact with flat surfaces, thereby reducing the risk of scratches when the phone is placed face down or on its back.
Figure 3.4: Illustration of raised lips providing protective clearance for the camera and screen.
4. Setup and Installation
- Clean Your Device: Before installing the case, ensure your iPhone 13 mini is clean and free of dust or debris. Use a soft, dry cloth to wipe down the phone.
- Insert Top First: Gently align the top edge of your iPhone 13 mini with the top edge of the case, ensuring the camera module fits correctly into its cutout.
- Press Down Sides: Once the top is aligned, gently press the sides of your iPhone into the case, working your way down. Ensure all corners are securely seated within the case.
- Check Fit: Verify that the case fits snugly around your device, and all buttons and ports are accessible and aligned with the case cutouts.
To remove the case, gently peel back one of the top corners, then carefully work your way around the edges until the phone can be lifted out.
5. Operating Instructions
Once installed, the Spigen Mag Armor case allows full functionality of your iPhone 13 mini. The tactile buttons provide a responsive feel, and precise cutouts ensure access to all ports, speakers, and the mute switch.
5.1 MagSafe Charging
To use MagSafe charging, simply place your iPhone 13 mini (with the case installed) onto a compatible MagSafe charger. The integrated magnets in the case will align your device correctly for optimal wireless charging.
Figure 5.1: Wireless charging with a MagSafe charger. The case supports MagSafe, standard wireless charging, and lightning cable charging.
6. Maintenance
- Cleaning: To clean the case, remove it from your iPhone. Use a soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive materials, as these can damage the case finish.
- Drying: Allow the case to air dry completely before re-installing it on your device.
- Regular Inspection: Periodically remove the case and clean both your phone and the inside of the case to prevent dust and debris buildup, which can cause scratches over time.
7. Troubleshooting
- Case does not fit: Ensure you have the correct model (iPhone 13 mini). This case is not compatible with other iPhone models.
- MagSafe charger not attaching securely: Verify that the MagSafe charger is compatible and that there is no foreign material between the case and the charger.
- Buttons are stiff: Ensure the case is properly seated on the phone. If the issue persists, the buttons are designed to be tactile and may require a slight break-in period.
8. Specifications
| Brand | Spigen |
| Model Name | Mag Armor |
| Model Number | ACS03680 |
| Compatible Phone Models | iPhone 13 mini |
| Material | Polycarbonate, Thermoplastic Polyurethane (TPU) |
| Color | Matte Black |
| Product Features | Air-cushion technology, Anti-Fingerprint, Anti-Slip, Flexible, Slim Fit |
| Item Dimensions | 7.6 x 1 x 15.2 Centimeters |
| Item Weight | 23 Grams |
| Country of Origin | Korea, Republic of |
9. Warranty Information
This Spigen product comes with a 1-year warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For further details or to initiate a warranty claim, please contact Spigen customer support.
10. Support
For technical assistance, product inquiries, or warranty support, please visit the official Spigen website or contact their customer service department. Contact information for Spigen India Private Limited is provided below:
Importer Contact Information: Spigen India Private Limited / NO.295 - 296, Ecotech-1, Extension, Greater Noida, Uttar Pradesh 201310, India
Manufacturer Contact Information: Spigen Korea Co., Ltd. / SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea
You can also visit the Spigen Store on Amazon for more product information.
