1. Product Overview
The WarmlyYours Metropolitan 10-Bar Electric Towel Warmer is designed to provide warm, dry towels and bathrobes. Constructed from durable 304 stainless steel with a polished finish, this wall-mounted unit features 10 heated bars and offers versatile installation options. It incorporates advanced safety features for reliable operation.
Image 1.1: The Metropolitan 10-Bar Electric Towel Warmer with a towel.
Key Features:
- 10-Bar Design: Provides ample space for warming up to two large towels or bathrobes.
- Premium Material: Crafted from high-quality 304 stainless steel with a polished finish for durability and corrosion resistance.
- Dual Connection: Can be installed as a plug-in unit or hardwired by a licensed electrician.
- TempSmart Overheat Protection: Prevents the unit's surface temperature from exceeding 167°F (75°C).
- Integrated Power Switch: Features an indicator light for easy operation.
- cETLus Listed: Certified for safety and reliability.
2. Safety Information
Please read all safety instructions carefully before installation and use to prevent injury or damage. Keep this manual for future reference.
General Safety Precautions:
- Electrical Safety: Ensure the towel warmer is connected to a properly grounded electrical outlet. For hardwired installations, a licensed electrician is required.
- Water Proximity: Do not install the towel warmer inside a shower, sauna, or directly above a bathtub. Maintain a safe distance from water sources.
- Surface Temperature: The surface of the towel warmer can reach temperatures up to 167°F (75°C). Avoid prolonged direct skin contact, especially for children, the elderly, or individuals with reduced physical, sensory, or mental capabilities.
- Overheat Protection: The integrated TempSmart technology is designed to prevent overheating. Do not attempt to bypass or modify this safety feature.
- Intended Use: This appliance is designed solely for warming and drying towels and bathrobes. Do not use it for drying other items or for space heating.
- Children and Pets: Keep children and pets away from the towel warmer during operation.
- Cleaning: Always disconnect power before cleaning. Use a soft, damp cloth; avoid abrasive cleaners or solvents.
Image 2.1: The towel warmer is designed with safety in mind for all ages.
3. Setup and Installation
The Metropolitan towel warmer offers flexible installation as either a plug-in unit or a hardwired fixture. Professional installation by a licensed electrician is recommended for hardwired setups.
Included Components:
- Towel Warmer Unit
- Mounting Brackets and Hardware
- Installation Manual (this document)
Installation Options:
- Plug-in Installation: The unit comes with a power cord for direct connection to a standard 120 VAC grounded outlet. Ensure the outlet is within reach of the cord and located in a safe, dry area.
- Hardwired Installation: For a seamless, cord-free appearance, the unit can be hardwired into your home's electrical system. This requires the expertise of a licensed electrician to ensure compliance with local electrical codes and safety standards. No bulky cover plate is required for hardwired setups.
Image 3.1: Dual connection options: plug-in or hardwired.
Mounting:
The towel warmer is designed for wall-mounted installation. Select a suitable location in your bathroom, ensuring it is away from direct water spray and has adequate structural support for the unit's weight and any towels placed on it. Refer to the detailed mounting instructions provided with the hardware for precise measurements and drilling.
Image 3.2: Rear view of the towel warmer with mounting points.
4. Operating Instructions
Operating your WarmlyYours Metropolitan towel warmer is straightforward.
Turning On/Off:
- Locate the integrated power switch on the unit.
- Press the switch to turn the unit ON. An indicator light will illuminate, confirming power.
- Press the switch again to turn the unit OFF. The indicator light will extinguish.
Image 4.1: Integrated power switch with indicator light.
Warming Towels:
- Hang up to two large towels or bathrobes evenly over the 10 bars. Ensure towels are not bunched up to allow for optimal heat distribution.
- Allow approximately 15-20 minutes for towels to reach a comfortable warmth. Thicker towels or multiple items may require a longer warming period.
- The towel warmer is designed to gently warm and dry towels, not to scorch them.
Image 4.2: Before and after using the towel warmer.
5. Maintenance
Regular cleaning will help maintain the appearance and performance of your towel warmer.
Cleaning Instructions:
- Always ensure the towel warmer is turned OFF and unplugged (or power is disconnected for hardwired units) before cleaning.
- Allow the unit to cool completely.
- Wipe the surface with a soft, damp cloth. For polished stainless steel, a microfiber cloth is recommended to avoid streaks.
- Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or solvents, as these can damage the finish.
- Dry thoroughly with a soft, clean cloth after cleaning.
The 304 stainless steel construction is designed to resist rust and corrosion, ensuring long-lasting performance with proper care.
6. Troubleshooting
If you encounter issues with your towel warmer, please refer to the following common troubleshooting steps.
Common Issues and Solutions:
- Unit does not turn on:
- Check if the power cord is securely plugged into a functional outlet (for plug-in models).
- Ensure the circuit breaker for the bathroom is not tripped.
- Verify that the integrated power switch is pressed to the ON position and the indicator light is illuminated.
- Towel warmer is not heating sufficiently:
- Ensure towels are spread out evenly and not excessively thick or bunched, which can hinder heat transfer.
- Allow adequate time for the unit to heat up and for towels to warm (15-20 minutes or longer for very thick towels).
- The TempSmart technology prevents the surface from exceeding 167°F (75°C). This is a safety feature, not a malfunction.
- Unusual noises or odors:
- Immediately turn off and unplug the unit (or disconnect power for hardwired models).
- Contact customer support for assistance. Do not attempt to repair the unit yourself.
If these steps do not resolve the issue, please contact WarmlyYours customer support for further assistance.
7. Specifications
Detailed technical specifications for the WarmlyYours Metropolitan 10-Bar Electric Towel Warmer.
Image 7.1: Product dimensions and features.
| Feature | Detail |
|---|---|
| Model Number | TW-MT-10PS-HP |
| Brand | WarmlyYours |
| Material | 304 Stainless Steel |
| Finish Type | Polished |
| Product Dimensions (L x W x H) | 4.75" x 19.75" x 41.5" (121 mm x 502 mm x 1054 mm) |
| Item Weight | 12.14 pounds |
| Power | 150W |
| Heat Output | 512 BTUs/hr |
| Heating Method | Electric |
| Installation Type | Wall-Mounted (Dual connection: Plug-in or Hardwired) |
| Safety Features | TempSmart Overheat Protection (max 167°F / 75°C) |
| Certifications | cETLus Listed |
| Maximum Recommended Load | 12 Pounds |
| UPC | 881308068066 |
8. Warranty and Support
WarmlyYours is committed to providing high-quality products and excellent customer service.
Warranty Information:
This WarmlyYours Metropolitan 10-Bar Electric Towel Warmer is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
Customer Support:
WarmlyYours offers lifetime technical support for this product. If you have any questions regarding installation, operation, maintenance, or troubleshooting that are not covered in this manual, please contact WarmlyYours customer service. Our team is available to provide expert assistance.
Image 8.1: Warranty and technical support details.
For more information or to contact support, please visit the official WarmlyYours website or refer to the contact details provided with your product packaging.
