BANDAI Flame Toys G.I. Joe Snake Eyes Furai Model Kit FLM51398 Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Flame Toys G.I. Joe Snake Eyes Furai Model Kit. This 21st series model kit features the iconic G.I. Joe Snake Eyes character in his comics version, standing approximately 5.2 inches tall when assembled. It boasts good articulation with over 40 movable joints, allowing for a wide range of posing options. The kit is made of durable ABS & PVC materials, suitable for both experienced model kit builders and beginners due to its simple assembly design and different injection colors of runner parts.

Key Features:

• Comics version G.I. Joe Snake Eyes design.
• Over 40 movable joints for extensive articulation.
• Includes a variety of accessories: sword, rocket launcher, machine gun, hand gun, grenade, and knife.
• Constructed from ABS & PVC materials.
• Simple assembly design with pre-colored parts, no painting required (though painting is optional for customization).
• Some accessories are compatible with the [Furai Model] G.I. Joe Speed Cycle for Snake Eyes (sold separately).

2. Important Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

Always supervise young children during assembly and play. Keep all small parts away from infants and pets. This product is recommended for ages 15 years and up.

3. What's in the Box

Your Flame Toys G.I. Joe Snake Eyes Furai Model Kit package includes the following components:

• Flame Toys - Snake Eyes [GI Joe] Furai Model Figure (FLM51398) parts on sprues.
• Assembly Instruction Manual.
• Various accessories: sword, rocket launcher, machine gun, hand gun, grenade, knife.

4. Assembly Instructions

The Snake Eyes Furai Model Kit is designed for snap-together assembly, requiring no glue. The parts are pre-colored, so painting is optional. However, a nipper (plastic model cutter) is recommended to cleanly remove parts from the sprues.

Assembly Steps:

1. Carefully identify all the sprues and parts by referring to the included assembly instruction manual.
2. Using a nipper, carefully cut each part from its sprue. Ensure a clean cut to avoid damaging the part.
3. Follow the step-by-step diagrams in the assembly manual to connect the parts. Pay close attention to the orientation and connection points.
4. Assemble the main body, limbs, and head separately before combining them.
5. Once the main figure is assembled, attach the desired accessories (sword, rocket launcher, etc.) to the figure's hands or designated attachment points.

Assembly Demonstration Video:

5. Operating and Posing

Your Snake Eyes Furai Model Kit features over 40 movable joints, allowing for extensive posing and dynamic displays. The articulation points include the neck, shoulders, elbows, wrists, waist, hips, knees, and ankles.

Posing Tips:

• Gently manipulate joints to achieve desired poses. Avoid excessive force to prevent breakage.
• Utilize the included accessories to enhance dynamic action scenes. The figure can hold its sword, rocket launcher, machine gun, hand gun, grenade, and knife.
• Experiment with different stances, such as kneeling, running, or combat-ready positions, to fully appreciate the figure's articulation.
• Some accessories are designed to be equipped on the [Furai Model] G.I. Joe Speed Cycle for Snake Eyes (sold separately) for expanded play and display options.

6. Maintenance

To ensure the longevity and appearance of your Snake Eyes Furai Model Kit, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, lightly dampen the cloth with water (no harsh chemicals) and wipe carefully.
• Handling: Always handle the figure by its main body parts. Avoid gripping delicate areas like wrist and ankle pegs with excessive force, as these parts can be fragile.
• Storage: Store the model kit away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or discoloration.
• Joint Care: If joints become stiff, gently twist them back and forth to loosen. If they become too loose, a small amount of clear nail polish or a specialized joint tightener can be applied to the peg and allowed to dry before reassembly.

7. Troubleshooting

Common Issues and Solutions:

• Parts not fitting: Ensure you are using the correct parts for each step as indicated in the manual. Apply gentle, even pressure. If a part is too tight, carefully trim any excess plastic from the peg or hole with a hobby knife.
• Accessories not holding: Some accessories, particularly smaller ones like grenades or knives, may not fit perfectly in the figure's hands or attachment points. If an accessory is loose, a tiny dot of non-permanent adhesive (like poster putty) can help secure it for display.
• Delicate parts breaking: As noted by some users, wrist and ankle pegs can be delicate. Always apply minimal force when posing these joints. If a part breaks, contact customer support for possible replacement options or consider using hobby-grade plastic cement for repair if feasible.
• Loose pouches/armor: If small decorative parts like forearm pouches fall off easily, a small amount of hobby glue can be used to secure them permanently.

8. Specifications

9. Warranty and Support

This product has been thoroughly tested for safety and meets all North American consumer product safety regulations. The product box will feature a Bluefin / Bandai Namco warning label, which serves as proof that you are purchasing an officially licensed Flame Toys product, distributed by its sole and authorized distributor (Bluefin) for the U.S. Markets.

The affixed label also entitles the purchaser to product support assistance within the United States. For any inquiries regarding product defects, missing parts, or assembly issues, please refer to the contact information provided on the Bluefin / Bandai Namco warning label or visit their official support website.