1. Introduction
Thank you for choosing the Philips DORIS LED Ceiling Light. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before proceeding and retain them for future reference.
A clear view of the Philips DORIS LED Ceiling Light, showcasing its round black frame and white light diffuser.
The Philips DORIS LED Ceiling Light is designed for modern interiors, offering efficient and comfortable illumination. Featuring a 17W LED light source with 1500 lumens, it provides ample light while being energy-efficient. Its IP44 rating ensures it is water-resistant, making it suitable for use in damp environments like bathrooms. The fixture also incorporates Philips EyeComfort technology, designed to be gentle on your eyes.
2. Safety Information
WARNING: Always switch off the electricity supply at the main fuse board or circuit breaker before commencing installation, maintenance, or bulb replacement. Ensure no power is connected to the fixture during these procedures.
- Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
- This product is rated IP44, indicating protection against solid objects larger than 1mm and splashing water from any direction. It is suitable for use in bathrooms (Zone 2 and outside zones).
- Do not modify the product in any way. Any modifications may void the warranty and create a safety hazard.
- Ensure the mounting surface is sound and capable of supporting the weight of the fixture.
- Do not look directly into the LED light source when it is illuminated.
- Keep packaging materials out of reach of children.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer.
- Philips DORIS LED Ceiling Light fixture
- Mounting bracket
- Screws and wall plugs
- User Manual (this document)
The retail packaging for the Philips DORIS LED Ceiling Light, highlighting key features like LED, 17W, EyeComfort, and IP44 rating.
4. Setup and Installation
Before installation, ensure the power supply is disconnected at the circuit breaker.
Tools Required:
- Screwdriver (Phillips head)
- Drill and drill bits (appropriate for wall plugs)
- Pencil
- Measuring tape
- Wire strippers (if necessary)
Installation Steps:
- Prepare the Installation Area: Turn off the main power supply to the circuit where the light will be installed. Use a voltage tester to confirm the power is off.
- Mark Mounting Points: Position the mounting bracket on the ceiling at the desired location. Use a pencil to mark the drilling points through the holes in the bracket.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for the provided wall plugs. Insert the wall plugs flush with the ceiling surface.
- Secure Mounting Bracket: Attach the mounting bracket to the ceiling using the provided screws. Ensure it is firmly secured.
- Connect Wiring: Carefully connect the electrical wires from the ceiling to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring codes. If unsure, consult a qualified electrician.
- Attach Light Fixture: Align the light fixture with the mounting bracket and secure it in place using the designated screws or locking mechanism. Ensure the fixture is flush against the ceiling and securely fastened.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the main circuit breaker.
Technical drawing illustrating the dimensions of the Philips DORIS LED Ceiling Light, with a diameter of 313mm and a height of 90mm. Refer to this for precise installation planning.
5. Operating Instructions
The Philips DORIS LED Ceiling Light operates via a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the light on or off.
- Ensure the light fixture is properly installed and connected to a power source.
- Use the wall switch to control the light.
- This fixture provides a fixed light output and does not support dimming unless connected to a compatible dimmer switch (check product specifications for dimmer compatibility if applicable).
6. Maintenance
To ensure the longevity and optimal performance of your Philips DORIS LED Ceiling Light, follow these simple maintenance guidelines:
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LED Light Source: The LED light source in this fixture is designed for a long lifespan and is not user-replaceable. Do not attempt to open the fixture to replace the LEDs.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
7. Troubleshooting
If you encounter any issues with your Philips DORIS LED Ceiling Light, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty wall switch | Check circuit breaker and wall switch. Ensure power is restored. Verify wiring connections are secure (with power off). Test wall switch. |
| Light flickers | Loose wiring connection Incompatible dimmer switch (if applicable) | Check wiring connections (with power off). Ensure no dimmer switch is used unless explicitly stated as compatible. |
| Light is dim or inconsistent | Voltage fluctuation Fixture defect | Ensure stable power supply. If problem persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Philips customer support or a qualified electrician.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Philips |
| Model Name | DORIS |
| Model Number | 96146/17/30 |
| Power Consumption | 17 Watts |
| Luminous Flux | 1500 Lumens |
| Light Source | Integrated LED |
| Color | Black |
| Material | Plastic |
| Style | Modern |
| Dimensions (Diameter x Height) | 313mm x 90mm |
| Ingress Protection (IP) Rating | IP44 (Water-resistant) |
| Installation Type | Flush Mount / Ceiling Mount |
| Special Features | EyeComfort, Water-resistant |
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or visit the official Philips lighting website. Philips offers customer support for product inquiries, technical assistance, and warranty claims.
To contact Philips support, please visit www.philips.com/support or refer to the contact details provided in your product packaging.
