INVIROX 2026 Edition Dog Training Collar User Manual

Introduction

Thank you for choosing the INVIROX Dog Training Collar. This remote training system is designed to assist in effective and humane dog training, offering various stimulation modes to reinforce commands and correct unwanted behaviors. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

The INVIROX Dog Training Collar package, including the remote transmitter, receiver collar, and product packaging.

Safety Information

This device is intended for training purposes only. Do not use it for any other purpose.
The collar should not be worn for more than 12 hours per day. Prolonged wear can cause skin irritation.
Regularly check your dog's neck for any signs of irritation or sores. If found, discontinue use until the skin heals.
Ensure the contact points are clean and free of debris.
The remote transmitter features a keypad lock to prevent accidental activation. Always engage the lock when not actively training.
Not suitable for puppies under 6 months old or dogs weighing less than 8 lbs.
Keep out of reach of children.

A dog wearing the INVIROX training collar next to a child, highlighting the 100% safety keypad lock feature on the remote to prevent accidental activation.

Package Contents

Verify that all items are present in your package:

Remote Transmitter
Receiver Collar
Adjustable Nylon Strap
Protective Rubber Contact Point Covers (various sizes)
Metal Contact Points (short and long)
Test Bulb
Wrist Strap for Remote
Micro USB Charging Cable (2-in-1)
User Manual (this document)

Contents of the INVIROX Dog Training Collar package: remote, receiver, strap, protective rubber covers, metal prongs, test bulb, wrist strap, and micro USB cable.

Setup

1. Charging the Devices

Before first use, fully charge both the remote transmitter and the receiver collar. Use the provided 2-in-1 Micro USB charging cable.

Connect the charging cable to a standard USB power adapter (not included).
Plug one micro USB end into the charging port of the remote and the other into the receiver.
The battery indicator on the remote will show charging status. The receiver's indicator light will change (refer to device for specific light behavior, typically red for charging, green for full).
Charging typically takes 2-3 hours. Once fully charged, disconnect the devices.

Components of the INVIROX Dog Training Collar, including the remote, receiver, and micro USB charging cable, with details on battery life: 45 days for remote, 15 days for receiver, and 90 days standby.

2. Pairing the Remote and Receiver

The devices are usually pre-paired from the factory. If they are not communicating, follow these steps:

Ensure both the remote and receiver are turned off.
Turn on the remote transmitter.
Press and hold the power button on the receiver collar until its indicator light flashes rapidly.
Within 10 seconds, press any stimulation button (Beep, Vibration, or Shock) on the remote.
If pairing is successful, the receiver's indicator light will stop flashing and remain solid, or flash slowly.
Test the functions to confirm pairing.

3. Fitting the Collar

Proper fit is crucial for effectiveness and comfort. The collar should be snug but not too tight, allowing two fingers to fit between the strap and your dog's neck.

Position the receiver on the underside of your dog's neck, directly below the chin.
Ensure the contact points make direct contact with your dog's skin. You may need to trim long fur for optimal contact.
Select the appropriate length of metal contact points based on your dog's coat thickness. Use the protective rubber covers if desired for added comfort, ensuring they do not impede contact.
The collar is adjustable for dogs weighing 8 to 110 lbs.

A black dog wearing the INVIROX training collar, demonstrating proper collar placement.

Operating Instructions

Remote Transmitter Functions

Power Button: Turns the remote on/off.
Keypad Lock: Slide the lock switch to prevent accidental button presses.
Light Button (Flashlight Icon): Activates the built-in flashlight on the remote. Also used to switch between training modes (Beep, Vibration, Shock).
Dog Selector Button (1/2 Icon): If training two dogs with separate collars, press this button to switch control between Dog 1 and Dog 2.
Beep Button (Speaker Icon): Delivers an audible tone to the receiver. Levels 1-8.
Vibration Button (Vibration Icon): Delivers a non-harmful vibration to the receiver. Levels 1-16.
Shock Button (Lightning Bolt Icon): Delivers a static stimulation to the receiver. Levels 1-99.
+/- Buttons: Adjust the intensity level for Vibration and Shock modes.

Detailed view of the INVIROX remote transmitter, illustrating the dual functions of its buttons: light/mode switching and on/off/dog receiver switching.

Training Modes and Levels

The INVIROX collar offers 123 total levels of control across three modes:

Beep (1-8 Tones): An audible warning. Often used as a precursor to other stimulations or as a positive reinforcement marker.
Vibration (1-16 Levels): A tactile warning or correction. Start at the lowest level and increase until your dog responds.
Static Stimulation (1-99 Levels): A static pulse. This should be used as a last resort and at the lowest effective level. Always test on yourself first to understand the sensation.

Illustration of the INVIROX Dog Training Collar's 123 levels of control, including beep (1-8 tones), vibration (1-16 levels), and E-Stim (1-99 levels).

Range and Waterproofing

Operational Range: Up to 1100 yards (approximately 0.625 miles) in open areas. Environmental factors like terrain and obstacles can affect range.
Waterproof Rating: The receiver collar is IP67 waterproof, meaning it can withstand submersion in up to 1 meter of water for 30 minutes. The remote transmitter is not waterproof.

A person training a dog off-leash in an open field, demonstrating the 1100-yard operational range of the INVIROX Dog Training Collar.

A dog shaking water off, illustrating the IP67 waterproof rating of the INVIROX Dog Training Collar receiver.

Training Tips

Effective training requires consistency, patience, and positive reinforcement. The e-collar is a tool to aid in communication, not a substitute for proper training methods.

Start with Basic Obedience: Ensure your dog understands basic commands (sit, stay, come) before introducing the e-collar.
Introduce Gradually: Allow your dog to wear the collar for short periods without activation so they associate it with comfort, not correction.
Find the Right Level: Begin with the lowest vibration or static stimulation level and gradually increase until your dog shows a subtle response (e.g., ear twitch, head turn). This is their "recognition level."
Timing is Key: Deliver the stimulation immediately as your dog performs the unwanted behavior or fails to respond to a command.
Positive Reinforcement: Always follow a correct response with praise, treats, or affection.
Consistency: Everyone involved in training should use the collar consistently and follow the same commands and correction methods.
Short Training Sessions: Keep training sessions brief and positive to maintain your dog's engagement.

Maintenance

Cleaning: Regularly clean the receiver collar, especially the contact points, with a damp cloth to remove dirt and oils.
Battery Care: Recharge the devices when the battery indicator is low. Avoid fully depleting the battery frequently to prolong its lifespan. The remote offers up to 45 days of use per charge, and the receiver up to 15 days, with a standby time of 90 days.
Storage: Store the collar and remote in a dry, cool place when not in use.

Troubleshooting

Problem	Possible Cause	Solution
Collar not working/no response	Low battery on remote or receiver. Not paired correctly. Keypad lock engaged on remote. Contact points not touching skin. Out of range.	Charge both devices. Re-pair the remote and receiver (see Setup section). Unlock the keypad. Adjust collar fit; trim fur if necessary. Move closer to your dog.
Dog shows no reaction to stimulation	Stimulation level too low. Poor contact with skin.	Increase the stimulation level gradually. Adjust collar fit; ensure contact points are firm against the skin.
Remote display is blank	Remote is off or battery is low.	Turn on the remote. Charge the remote.

Specifications

Model: 2024 dog training collar / 2025 E COLLAR
Brand: INVIROX
Stimulation Modes: Beep (1-8 levels), Vibration (1-16 levels), Static Stimulation (1-99 levels)
Range: Up to 1100 yards (approx. 1000 meters)
Waterproof Rating (Receiver): IP67
Battery Type: Lithium Polymer (rechargeable)
Remote Battery Life: Up to 45 days (usage dependent)
Receiver Battery Life: Up to 15 days (usage dependent)
Standby Time: Up to 90 days
Adjustable Collar Size: Suitable for dogs 8 - 110 lbs
Material: Plastic
Item Weight: 11.7 ounces (total package)
Included Components: Remote, Receiver, Strap, Protective Rubber, Metal Prongs, Test Bulb, Wrist Strap, Micro USB Cable

Warranty and Support

The INVIROX Dog Training Collar comes with a 1-year manufacturer's warranty. For any questions, troubleshooting assistance, or warranty claims, please contact INVIROX customer support.

Contact Information: Refer to the product packaging or the official INVIROX website for the most current customer support details.

	2-in-1 Remote Dog Training & Auto Anti-Bark Collar Operating and Training Guide This guide provides comprehensive instructions and tips for using the 2-in-1 Remote Dog Training and Auto Anti-Bark Collar. Learn about its features, operation, safety precautions, and effective training methods for your dog.
	SODOG KT47 Dog Training Collar User Manual - Remote Control System Comprehensive user manual for the SODOG KT47 Dog Training Collar. Learn about components, setup, charging, features like beep and vibration, manual pairing, channel management, maintenance, and FCC compliance.
	JUGBOW DT-62 Dog Training Collar User Manual - Shock, Vibration, Beep Modes Comprehensive user manual for the JUGBOW DT-62 Dog Training Collar. Learn about setup, operation, features, safety, troubleshooting, and warranty for this remote dog training device.
	JUGBOW DT-68 Dog Training Collar User Manual & Guide Your essential guide to the JUGBOW DT-68 dog training collar. This user manual covers setup, operation, safety precautions, troubleshooting, and maintenance for effective and humane dog training. Learn about features like vibration, tone, and shock modes, waterproof design, and long-range capabilities.
	Pikabiu p-collar 628 Dog Training Collar User Manual Comprehensive user manual for the Pikabiu p-collar 628 Dog Training Collar, covering features, safety, operation, charging, pairing, troubleshooting, and warranty information.
	PaiPaitek PD 526-TIO Dog Training Collar User Guide Comprehensive user guide for the PaiPaitek PD 526-TIO dog training collar, covering setup, operation, safety instructions, auto anti-barking function, maintenance, specifications, pairing, testing, and troubleshooting.

INVIROX 2024 dog training collar